btstack/src/l2cap.h
2015-04-09 17:09:04 +02:00

299 lines
9.8 KiB
C

/*
* Copyright (C) 2014 BlueKitchen GmbH
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holders nor the names of
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
* 4. Any redistribution, use, or modification is done solely for
* personal benefit and not for any commercial purpose or for
* monetary gain.
*
* THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS
* RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Please inquire about commercial licensing options at
* contact@bluekitchen-gmbh.com
*
*/
/*
* l2cap.h
*
* Logical Link Control and Adaption Protocol (L2CAP)
*
* Created by Matthias Ringwald on 5/16/09.
*/
#ifndef __L2CAP_H
#define __L2CAP_H
#include "hci.h"
#include "l2cap_signaling.h"
#include <btstack/utils.h>
#include <btstack/btstack.h>
#if defined __cplusplus
extern "C" {
#endif
#define L2CAP_SIG_ID_INVALID 0
#define L2CAP_HEADER_SIZE 4
// size of HCI ACL + L2CAP Header for regular data packets (8)
#define COMPLETE_L2CAP_HEADER (HCI_ACL_HEADER_SIZE + L2CAP_HEADER_SIZE)
// minimum signaling MTU
#define L2CAP_MINIMAL_MTU 48
#define L2CAP_DEFAULT_MTU 672
// Minimum/default MTU
#define L2CAP_LE_DEFAULT_MTU 23
// check L2CAP MTU
#if (L2CAP_MINIMAL_MTU + L2CAP_HEADER_SIZE) > HCI_ACL_PAYLOAD_SIZE
#error "HCI_ACL_PAYLOAD_SIZE too small for minimal L2CAP MTU of 48 bytes"
#endif
// L2CAP Fixed Channel IDs
#define L2CAP_CID_SIGNALING 0x0001
#define L2CAP_CID_CONNECTIONLESS_CHANNEL 0x0002
#define L2CAP_CID_ATTRIBUTE_PROTOCOL 0x0004
#define L2CAP_CID_SIGNALING_LE 0x0005
#define L2CAP_CID_SECURITY_MANAGER_PROTOCOL 0x0006
// L2CAP Configuration Result Codes
#define L2CAP_CONF_RESULT_UNKNOWN_OPTIONS 0x0003
// L2CAP Reject Result Codes
#define L2CAP_REJ_CMD_UNKNOWN 0x0000
// Response Timeout eXpired
#define L2CAP_RTX_TIMEOUT_MS 10000
// Extended Response Timeout eXpired
#define L2CAP_ERTX_TIMEOUT_MS 120000
// private structs
typedef enum {
L2CAP_STATE_CLOSED = 1, // no baseband
L2CAP_STATE_WILL_SEND_CREATE_CONNECTION,
L2CAP_STATE_WAIT_CONNECTION_COMPLETE,
L2CAP_STATE_WAIT_REMOTE_SUPPORTED_FEATURES,
L2CAP_STATE_WAIT_INCOMING_SECURITY_LEVEL_UPDATE,
L2CAP_STATE_WAIT_OUTGOING_SECURITY_LEVEL_UPDATE,
L2CAP_STATE_WAIT_CLIENT_ACCEPT_OR_REJECT,
L2CAP_STATE_WAIT_CONNECT_RSP, // from peer
L2CAP_STATE_CONFIG,
L2CAP_STATE_OPEN,
L2CAP_STATE_WAIT_DISCONNECT, // from application
L2CAP_STATE_WILL_SEND_CONNECTION_REQUEST,
L2CAP_STATE_WILL_SEND_CONNECTION_RESPONSE_INSUFFICIENT_SECURITY,
L2CAP_STATE_WILL_SEND_CONNECTION_RESPONSE_DECLINE,
L2CAP_STATE_WILL_SEND_CONNECTION_RESPONSE_ACCEPT,
L2CAP_STATE_WILL_SEND_DISCONNECT_REQUEST,
L2CAP_STATE_WILL_SEND_DISCONNECT_RESPONSE,
L2CAP_STATE_INVALID,
} L2CAP_STATE;
typedef enum {
L2CAP_CHANNEL_STATE_VAR_NONE = 0,
L2CAP_CHANNEL_STATE_VAR_RCVD_CONF_REQ = 1 << 0,
L2CAP_CHANNEL_STATE_VAR_RCVD_CONF_RSP = 1 << 1,
L2CAP_CHANNEL_STATE_VAR_SEND_CONF_REQ = 1 << 2,
L2CAP_CHANNEL_STATE_VAR_SEND_CONF_RSP = 1 << 3,
L2CAP_CHANNEL_STATE_VAR_SENT_CONF_REQ = 1 << 4,
L2CAP_CHANNEL_STATE_VAR_SENT_CONF_RSP = 1 << 5,
L2CAP_CHANNEL_STATE_VAR_SEND_CONF_RSP_MTU = 1 << 6, // in CONF RSP, add MTU field
L2CAP_CHANNEL_STATE_VAR_SEND_CONF_RSP_CONT = 1 << 7, // in CONF RSP, set CONTINUE flag
L2CAP_CHANNEL_STATE_VAR_SEND_CONF_RSP_INVALID = 1 << 8, // in CONF RSP, send UNKNOWN OPTIONS
L2CAP_CHANNEL_STATE_VAR_SEND_CMD_REJ_UNKNOWN = 1 << 9, // send CMD_REJ with reason unknown
L2CAP_CHANNEL_STATE_VAR_SEND_CONN_RESP_PEND = 1 << 10, // send Connection Respond with pending
} L2CAP_CHANNEL_STATE_VAR;
// info regarding an actual connection
typedef struct {
// linked list - assert: first field
linked_item_t item;
L2CAP_STATE state;
L2CAP_CHANNEL_STATE_VAR state_var;
bd_addr_t address;
hci_con_handle_t handle;
uint8_t remote_sig_id; // used by other side, needed for delayed response
uint8_t local_sig_id; // own signaling identifier
uint16_t local_cid;
uint16_t remote_cid;
uint16_t local_mtu;
uint16_t remote_mtu;
uint16_t flush_timeout; // default 0xffff
uint16_t psm;
gap_security_level_t required_security_level;
uint8_t packets_granted; // number of L2CAP/ACL packets client is allowed to send
uint8_t reason; // used in decline internal
timer_source_t rtx; // also used for ertx
// client connection
void * connection;
// internal connection
btstack_packet_handler_t packet_handler;
} l2cap_channel_t;
// info regarding potential connections
typedef struct {
// linked list - assert: first field
linked_item_t item;
// service id
uint16_t psm;
// incoming MTU
uint16_t mtu;
// client connection
void *connection;
// internal connection
btstack_packet_handler_t packet_handler;
// required security level
gap_security_level_t required_security_level;
} l2cap_service_t;
typedef struct l2cap_signaling_response {
hci_con_handle_t handle;
uint8_t sig_id;
uint8_t code;
uint16_t data; // infoType for INFORMATION REQUEST, result for CONNECTION request and command unknown
} l2cap_signaling_response_t;
void l2cap_block_new_credits(uint8_t blocked);
int l2cap_can_send_fixed_channel_packet_now(uint16_t handle);
// @deprecated use l2cap_can_send_fixed_channel_packet_now instead
int l2cap_can_send_connectionless_packet_now(void);
int l2cap_send_echo_request(uint16_t handle, uint8_t *data, uint16_t len);
void l2cap_require_security_level_2_for_outgoing_sdp(void); // for PTS testing only
/* API_START */
/**
* @brief Set up L2CAP and register L2CAP with HCI layer.
*/
void l2cap_init(void);
/**
* @brief Registers a packet handler that handles HCI and general BTstack events.
*/
void l2cap_register_packet_handler(void (*handler)(void * connection, uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size));
/**
* @brief Creates L2CAP channel to the PSM of a remote device with baseband address. A new baseband connection will be initiated if necessary.
*/
void l2cap_create_channel_internal(void * connection, btstack_packet_handler_t packet_handler, bd_addr_t address, uint16_t psm, uint16_t mtu);
/**
* @brief Disconnects L2CAP channel with given identifier.
*/
void l2cap_disconnect_internal(uint16_t local_cid, uint8_t reason);
/**
* @brief Queries the maximal transfer unit (MTU) for L2CAP channel with given identifier.
*/
uint16_t l2cap_get_remote_mtu_for_local_cid(uint16_t local_cid);
/**
* @brief Sends L2CAP data packet to the channel with given identifier.
*/
int l2cap_send_internal(uint16_t local_cid, uint8_t *data, uint16_t len);
/**
* @brief Registers L2CAP service with given PSM and MTU, and assigns a packet handler. On embedded systems, use NULL for connection parameter.
*/
void l2cap_register_service_internal(void *connection, btstack_packet_handler_t packet_handler, uint16_t psm, uint16_t mtu, gap_security_level_t security_level);
/**
* @brief Unregisters L2CAP service with given PSM. On embedded systems, use NULL for connection parameter.
*/
void l2cap_unregister_service_internal(void *connection, uint16_t psm);
/**
* @brief Accepts/Deny incoming L2CAP connection.
*/
void l2cap_accept_connection_internal(uint16_t local_cid);
void l2cap_decline_connection_internal(uint16_t local_cid, uint8_t reason);
/**
* @brief Request LE connection parameter update
*/
int l2cap_le_request_connection_parameter_update(uint16_t handle, uint16_t interval_min, uint16_t interval_max, uint16_t slave_latency, uint16_t timeout_multiplier);
/**
* @brief Non-blocking UART write
*/
int l2cap_can_send_packet_now(uint16_t local_cid);
int l2cap_reserve_packet_buffer(void);
void l2cap_release_packet_buffer(void);
/**
* @brief Get outgoing buffer and prepare data.
*/
uint8_t *l2cap_get_outgoing_buffer(void);
int l2cap_send_prepared(uint16_t local_cid, uint16_t len);
int l2cap_send_prepared_connectionless(uint16_t handle, uint16_t cid, uint16_t len);
/**
* @brief Bluetooth 4.0 - allows to register handler for Attribute Protocol and Security Manager Protocol.
*/
void l2cap_register_fixed_channel(btstack_packet_handler_t packet_handler, uint16_t channel_id);
uint16_t l2cap_max_mtu(void);
uint16_t l2cap_max_le_mtu(void);
int l2cap_send_connectionless(uint16_t handle, uint16_t cid, uint8_t *data, uint16_t len);
/* API_END */
#if defined __cplusplus
}
#endif
#endif // __L2CAP_H