btstack/platform/embedded/hal_em9304_spi.h
2021-11-02 09:31:00 +01:00

132 lines
3.6 KiB
C

/*
* Copyright (C) 2017 BlueKitchen GmbH
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holders nor the names of
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
* 4. Any redistribution, use, or modification is done solely for
* personal benefit and not for any commercial purpose or for
* monetary gain.
*
* THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL BLUEKITCHEN
* GMBH OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Please inquire about commercial licensing options at
* contact@bluekitchen-gmbh.com
*
*/
/*
* hal_em9304_spi.h
*
* Hardware Abstraction Layer for EM9304 connected via SPI with additional RDY Interrupt line
*
*/
#ifndef HAL_EM9304_SPI_H
#define HAL_EM9304_SPI_H
#include <stdint.h>
#if defined __cplusplus
extern "C" {
#endif
/* API_START */
/**
* @brief Initialize SPI
*/
void hal_em9304_spi_init(void);
/**
* @brief Deinitialize SPI
*/
void hal_em9304_spi_deinit(void);
/**
* @brief Set callback for RDY - can be called from ISR context
* @param callback
*/
void hal_em9304_spi_set_ready_callback(void (*callback)(void));
/**
* @brief Set callback for transfer complete - can be called from ISR context
* @param callback
*/
void hal_em9304_spi_set_transfer_done_callback(void (*callback)(void));
/**
* @brief Enable READY IRQ
*/
void hal_em9304_spi_enable_ready_interrupt(void);
/**
* @brief Disable READY IRQ
*/
void hal_em9304_spi_disable_ready_interrupt(void);
/**
* @brief Poll READY state
*/
int hal_em9304_spi_get_ready();
/**
* @brief Set Chip Selet
* @param enable
*/
void hal_em9304_spi_set_chip_select(int enable);
/**
* @brief Check if full duplex operation via hal_em9304_spi_transceive is supported
*/
int hal_em9304_spi_get_fullduplex_support(void);
/**
* @brief Transmit and Receive bytes via SPI
* @param tx_data buffer to transmit
* @param rx_data buffer to receive into
* @param len
*/
void hal_em9304_spi_transceive(const uint8_t * tx_data, uint8_t * rx_data, uint16_t len);
/**
* @brief Transmit bytes via SPI
* @param tx_data buffer to transmit
* @param len
*/
void hal_em9304_spi_transmit(const uint8_t * tx_data, uint16_t len);
/**
* @brief Receive bytes via SPI
* @param rx_data buffer to receive into
* @param len
*/
void hal_em9304_spi_receive(uint8_t * rx_data, uint16_t len);
/* API_END */
#if defined __cplusplus
}
#endif
#endif // HAL_EM9304_SPI_H