mirror of
https://github.com/bluekitchen/btstack.git
synced 2024-12-28 15:20:39 +00:00
|
…
|
||
|---|---|---|
| .. | ||
| .gitignore | ||
| ATWILC3000-Breakout.jpg | ||
| btstack_config.h | ||
| main.c | ||
| Makefile | ||
| README.md | ||
BTstack Port for POSIX Systems with Atmel ATWILC3000 Controller
This port allows to use the ATWILC3000 connected via UART with BTstack running on a POSIX host system, see test setup below (which lacks a proper RESET button).
Compilation
$ make
The Makefile downloads the wilc3000_bt_firmware.bin firmware from the GitHub atwilc3000/firmware repo.
Usage
Just run any of the provided examples, e.g.
$ ./le_counter
At start, the firmware file is first uploaded to the ATWILC3000, before BTstack start up.
Please note that it configures the ATWILC3000 for a higher baud rate it does not detect if the firmware has already been downloaded, so you need to reset the ATWILC3000 before starting an example.
Tested with the official ATWILC3000 SHIELD on OS X.
