mirror/btstack
1
0
Fork 0
mirror of https://github.com/bluekitchen/btstack.git synced 2025-03-23 10:21:12 +00:00
Code Issues Packages Projects Releases Wiki Activity
btstack/src/hci.h
Matthias Ringwald d0c2076983 Merge branch 'master' into ble-api-cleanup
2016-01-17 21:53:13 +01:00

870 lines
25 KiB
C
Raw Blame History

/*
* Copyright (C) 2014 BlueKitchen GmbH
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holders nor the names of
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
* 4. Any redistribution, use, or modification is done solely for
* personal benefit and not for any commercial purpose or for
* monetary gain.
*
* THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS
* RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Please inquire about commercial licensing options at
* contact@bluekitchen-gmbh.com
*
*/
/*
* hci.h
*
* Created by Matthias Ringwald on 4/29/09.
*
*/
#ifndef __HCI_H
#define __HCI_H
#include "btstack-config.h"
#include "bt_control.h"
#include "classic/remote_device_db.h"
#include "hci_cmds.h"
#include "hci_transport.h"
#include "bk_linked_list.h"
#include "utils.h"
#include <stdint.h>
#include <stdlib.h>
#include <stdarg.h>
#if defined __cplusplus
extern "C" {
#endif
// packet buffer sizes
// HCI_ACL_PAYLOAD_SIZE is configurable and defined in config.h
#define HCI_EVENT_BUFFER_SIZE (HCI_EVENT_HEADER_SIZE + HCI_EVENT_PAYLOAD_SIZE)
#define HCI_CMD_BUFFER_SIZE (HCI_CMD_HEADER_SIZE + HCI_CMD_PAYLOAD_SIZE)
#define HCI_ACL_BUFFER_SIZE (HCI_ACL_HEADER_SIZE + HCI_ACL_PAYLOAD_SIZE)
// size of hci buffers, big enough for command, event, or acl packet without H4 packet type
// @note cmd buffer is bigger than event buffer
#ifdef HCI_PACKET_BUFFER_SIZE
#if HCI_PACKET_BUFFER_SIZE < HCI_ACL_BUFFER_SIZE
#error HCI_PACKET_BUFFER_SIZE must be equal or larger than HCI_ACL_BUFFER_SIZE
#endif
#if HCI_PACKET_BUFFER_SIZE < HCI_CMD_BUFFER_SIZE
#error HCI_PACKET_BUFFER_SIZE must be equal or larger than HCI_CMD_BUFFER_SIZE
#endif
#else
#if HCI_ACL_BUFFER_SIZE > HCI_CMD_BUFFER_SIZE
#define HCI_PACKET_BUFFER_SIZE HCI_ACL_BUFFER_SIZE
#else
#define HCI_PACKET_BUFFER_SIZE HCI_CMD_BUFFER_SIZE
#endif
#endif
// additional pre-buffer space for packets to Bluetooth module, for now, used for HCI Transport H4 DMA
#define HCI_OUTGOING_PRE_BUFFER_SIZE 1
// BNEP may uncompress the IP Header by 16 bytes
#ifdef HAVE_BNEP
#define HCI_INCOMING_PRE_BUFFER_SIZE (16 - HCI_ACL_HEADER_SIZE - 4)
#endif
#ifndef HCI_INCOMING_PRE_BUFFER_SIZE
#define HCI_INCOMING_PRE_BUFFER_SIZE 0
#endif
//
#define IS_COMMAND(packet, command) (READ_BT_16(packet,0) == command.opcode)
/**
* LE connection parameter update state
*/
typedef enum {
CON_PARAMETER_UPDATE_NONE,
CON_PARAMETER_UPDATE_SEND_REQUEST,
CON_PARAMETER_UPDATE_SEND_RESPONSE,
CON_PARAMETER_UPDATE_CHANGE_HCI_CON_PARAMETERS,
CON_PARAMETER_UPDATE_DENY
} le_con_parameter_update_state_t;
typedef struct le_connection_parameter_range{
uint16_t le_conn_interval_min;
uint16_t le_conn_interval_max;
uint16_t le_conn_latency_min;
uint16_t le_conn_latency_max;
uint16_t le_supervision_timeout_min;
uint16_t le_supervision_timeout_max;
} le_connection_parameter_range_t;
// Authentication flags
typedef enum {
AUTH_FLAGS_NONE = 0x0000,
RECV_LINK_KEY_REQUEST = 0x0001,
HANDLE_LINK_KEY_REQUEST = 0x0002,
SENT_LINK_KEY_REPLY = 0x0004,
SENT_LINK_KEY_NEGATIVE_REQUEST = 0x0008,
RECV_LINK_KEY_NOTIFICATION = 0x0010,
DENY_PIN_CODE_REQUEST = 0x0040,
RECV_IO_CAPABILITIES_REQUEST = 0x0080,
SEND_IO_CAPABILITIES_REPLY = 0x0100,
SEND_USER_CONFIRM_REPLY = 0x0200,
SEND_USER_PASSKEY_REPLY = 0x0400,
// pairing status
LEGACY_PAIRING_ACTIVE = 0x2000,
SSP_PAIRING_ACTIVE = 0x4000,
// connection status
CONNECTION_ENCRYPTED = 0x8000,
} hci_authentication_flags_t;
/**
* Connection State
*/
typedef enum {
SEND_CREATE_CONNECTION = 0,
SENT_CREATE_CONNECTION,
SEND_CANCEL_CONNECTION,
SENT_CANCEL_CONNECTION,
RECEIVED_CONNECTION_REQUEST,
ACCEPTED_CONNECTION_REQUEST,
REJECTED_CONNECTION_REQUEST,
OPEN,
SEND_DISCONNECT,
SENT_DISCONNECT,
RECEIVED_DISCONNECTION_COMPLETE
} CONNECTION_STATE;
// bonding flags
enum {
BONDING_REQUEST_REMOTE_FEATURES = 0x01,
BONDING_RECEIVED_REMOTE_FEATURES = 0x02,
BONDING_REMOTE_SUPPORTS_SSP = 0x04,
BONDING_DISCONNECT_SECURITY_BLOCK = 0x08,
BONDING_DISCONNECT_DEDICATED_DONE = 0x10,
BONDING_SEND_AUTHENTICATE_REQUEST = 0x20,
BONDING_SEND_ENCRYPTION_REQUEST = 0x40,
BONDING_DEDICATED = 0x80,
BONDING_EMIT_COMPLETE_ON_DISCONNECT = 0x100
};
typedef enum {
BLUETOOTH_OFF = 1,
BLUETOOTH_ON,
BLUETOOTH_ACTIVE
} BLUETOOTH_STATE;
// le central scanning state
typedef enum {
LE_SCAN_IDLE,
LE_START_SCAN,
LE_SCANNING,
LE_STOP_SCAN,
} le_scanning_state_t;
typedef enum {
LE_CONNECTING_IDLE,
LE_CONNECTING_DIRECT,
LE_CONNECTING_WHITELIST,
} le_connecting_state_t;
//
// SM internal types and globals
//
typedef enum {
// general states
// state = 0
SM_GENERAL_IDLE,
SM_GENERAL_SEND_PAIRING_FAILED,
SM_GENERAL_TIMEOUT, // no other security messages are exchanged
// Phase 1: Pairing Feature Exchange
SM_PH1_W4_USER_RESPONSE,
// Phase 2: Authenticating and Encrypting
// get random number for use as TK Passkey if we show it
SM_PH2_GET_RANDOM_TK,
SM_PH2_W4_RANDOM_TK,
// get local random number for confirm c1
SM_PH2_C1_GET_RANDOM_A,
SM_PH2_C1_W4_RANDOM_A,
SM_PH2_C1_GET_RANDOM_B,
SM_PH2_C1_W4_RANDOM_B,
// calculate confirm value for local side
// state = 10
SM_PH2_C1_GET_ENC_A,
SM_PH2_C1_W4_ENC_A,
SM_PH2_C1_GET_ENC_B,
SM_PH2_C1_W4_ENC_B,
// calculate confirm value for remote side
SM_PH2_C1_GET_ENC_C,
SM_PH2_C1_W4_ENC_C,
SM_PH2_C1_GET_ENC_D,
SM_PH2_C1_W4_ENC_D,
SM_PH2_C1_SEND_PAIRING_CONFIRM,
SM_PH2_SEND_PAIRING_RANDOM,
// calc STK
// state = 20
SM_PH2_CALC_STK,
SM_PH2_W4_STK,
SM_PH2_W4_CONNECTION_ENCRYPTED,
// Phase 3: Transport Specific Key Distribution
// calculate DHK, Y, EDIV, and LTK
SM_PH3_GET_RANDOM,
SM_PH3_W4_RANDOM,
SM_PH3_GET_DIV,
SM_PH3_W4_DIV,
SM_PH3_Y_GET_ENC,
SM_PH3_Y_W4_ENC,
SM_PH3_LTK_GET_ENC,
// state = 30
SM_PH3_LTK_W4_ENC,
SM_PH3_CSRK_GET_ENC,
SM_PH3_CSRK_W4_ENC,
// exchange keys
SM_PH3_DISTRIBUTE_KEYS,
SM_PH3_RECEIVE_KEYS,
// RESPONDER ROLE
// state = 35
SM_RESPONDER_IDLE,
SM_RESPONDER_SEND_SECURITY_REQUEST,
SM_RESPONDER_PH0_RECEIVED_LTK,
SM_RESPONDER_PH0_SEND_LTK_REQUESTED_NEGATIVE_REPLY,
SM_RESPONDER_PH1_W4_PAIRING_REQUEST,
SM_RESPONDER_PH1_PAIRING_REQUEST_RECEIVED,
SM_RESPONDER_PH1_SEND_PAIRING_RESPONSE,
SM_RESPONDER_PH1_W4_PAIRING_CONFIRM,
SM_RESPONDER_PH2_W4_PAIRING_RANDOM,
SM_RESPONDER_PH2_W4_LTK_REQUEST,
SM_RESPONDER_PH2_SEND_LTK_REPLY,
// Phase 4: re-establish previously distributed LTK
// state == 46
SM_RESPONDER_PH4_Y_GET_ENC,
SM_RESPONDER_PH4_Y_W4_ENC,
SM_RESPONDER_PH4_LTK_GET_ENC,
SM_RESPONDER_PH4_LTK_W4_ENC,
SM_RESPONDER_PH4_SEND_LTK,
// INITITIATOR ROLE
// state = 51
SM_INITIATOR_CONNECTED,
SM_INITIATOR_PH0_HAS_LTK,
SM_INITIATOR_PH0_SEND_START_ENCRYPTION,
SM_INITIATOR_PH0_W4_CONNECTION_ENCRYPTED,
SM_INITIATOR_PH1_W2_SEND_PAIRING_REQUEST,
SM_INITIATOR_PH1_SEND_PAIRING_REQUEST,
SM_INITIATOR_PH1_W4_PAIRING_RESPONSE,
SM_INITIATOR_PH2_W4_PAIRING_CONFIRM,
SM_INITIATOR_PH2_W4_PAIRING_RANDOM,
SM_INITIATOR_PH3_SEND_START_ENCRYPTION,
} security_manager_state_t;
typedef enum {
IRK_LOOKUP_IDLE,
IRK_LOOKUP_W4_READY,
IRK_LOOKUP_STARTED,
IRK_LOOKUP_SUCCEEDED,
IRK_LOOKUP_FAILED
} irk_lookup_state_t;
// Authorization state
typedef enum {
AUTHORIZATION_UNKNOWN,
AUTHORIZATION_PENDING,
AUTHORIZATION_DECLINED,
AUTHORIZATION_GRANTED
} authorization_state_t;
typedef struct sm_pairing_packet {
uint8_t code;
uint8_t io_capability;
uint8_t oob_data_flag;
uint8_t auth_req;
uint8_t max_encryption_key_size;
uint8_t initiator_key_distribution;
uint8_t responder_key_distribution;
} sm_pairing_packet_t;
// connection info available as long as connection exists
typedef struct sm_connection {
uint16_t sm_handle;
uint8_t sm_role; // 0 - IamMaster, 1 = IamSlave
uint8_t sm_security_request_received;
uint8_t sm_bonding_requested;
uint8_t sm_peer_addr_type;
bd_addr_t sm_peer_address;
security_manager_state_t sm_engine_state;
irk_lookup_state_t sm_irk_lookup_state;
uint8_t sm_connection_encrypted;
uint8_t sm_connection_authenticated; // [0..1]
uint8_t sm_actual_encryption_key_size;
sm_pairing_packet_t sm_m_preq; // only used during c1
authorization_state_t sm_connection_authorization_state;
uint16_t sm_local_ediv;
uint8_t sm_local_rand[8];
int sm_le_db_index;
} sm_connection_t;
typedef struct {
// linked list - assert: first field
linked_item_t item;
// remote side
bd_addr_t address;
// module handle
hci_con_handle_t con_handle;
// le public, le random, classic
bd_addr_type_t address_type;
// role: 0 - master, 1 - slave
uint8_t role;
// connection state
CONNECTION_STATE state;
// bonding
uint16_t bonding_flags;
uint8_t bonding_status;
// requested security level
gap_security_level_t requested_security_level;
//
link_key_type_t link_key_type;
// remote supported features
uint8_t remote_supported_feature_eSCO;
// errands
uint32_t authentication_flags;
timer_source_t timeout;
#ifdef HAVE_TIME
// timer
struct timeval timestamp;
#endif
#ifdef HAVE_TICK
uint32_t timestamp; // timestamp in system ticks
#endif
#ifdef HAVE_TIME_MS
uint32_t timestamp; // timestamp in ms
#endif
// ACL packet recombination - PRE_BUFFER + ACL Header + ACL payload
uint8_t acl_recombination_buffer[HCI_INCOMING_PRE_BUFFER_SIZE + 4 + HCI_ACL_BUFFER_SIZE];
uint16_t acl_recombination_pos;
uint16_t acl_recombination_length;
// number packets sent to controller
uint8_t num_acl_packets_sent;
uint8_t num_sco_packets_sent;
// LE Connection parameter update
le_con_parameter_update_state_t le_con_parameter_update_state;
uint8_t le_con_param_update_identifier;
uint16_t le_conn_interval_min;
uint16_t le_conn_interval_max;
uint16_t le_conn_latency;
uint16_t le_supervision_timeout;
#ifdef HAVE_BLE
// LE Security Manager
sm_connection_t sm_connection;
#endif
} hci_connection_t;
/**
* HCI Inititizlization State Machine
*/
typedef enum hci_init_state{
HCI_INIT_SEND_RESET = 0,
HCI_INIT_W4_SEND_RESET,
HCI_INIT_SEND_READ_LOCAL_VERSION_INFORMATION,
HCI_INIT_W4_SEND_READ_LOCAL_VERSION_INFORMATION,
HCI_INIT_SEND_BAUD_CHANGE,
HCI_INIT_W4_SEND_BAUD_CHANGE,
HCI_INIT_CUSTOM_INIT,
HCI_INIT_W4_CUSTOM_INIT,
HCI_INIT_SEND_RESET_CSR_WARM_BOOT,
HCI_INIT_W4_CUSTOM_INIT_CSR_WARM_BOOT,
HCI_INIT_READ_LOCAL_SUPPORTED_COMMANDS,
HCI_INIT_W4_READ_LOCAL_SUPPORTED_COMMANDS,
HCI_INIT_SEND_BAUD_CHANGE_BCM,
HCI_INIT_W4_SEND_BAUD_CHANGE_BCM,
HCI_INIT_SET_BD_ADDR,
HCI_INIT_W4_SET_BD_ADDR,
HCI_INIT_SEND_RESET_ST_WARM_BOOT,
HCI_INIT_W4_SEND_RESET_ST_WARM_BOOT,
HCI_INIT_READ_BD_ADDR,
HCI_INIT_W4_READ_BD_ADDR,
HCI_INIT_READ_BUFFER_SIZE,
HCI_INIT_W4_READ_BUFFER_SIZE,
HCI_INIT_READ_LOCAL_SUPPORTED_FEATURES,
HCI_INIT_W4_READ_LOCAL_SUPPORTED_FEATURES,
HCI_INIT_SET_EVENT_MASK,
HCI_INIT_W4_SET_EVENT_MASK,
HCI_INIT_WRITE_SIMPLE_PAIRING_MODE,
HCI_INIT_W4_WRITE_SIMPLE_PAIRING_MODE,
HCI_INIT_WRITE_PAGE_TIMEOUT,
HCI_INIT_W4_WRITE_PAGE_TIMEOUT,
HCI_INIT_WRITE_CLASS_OF_DEVICE,
HCI_INIT_W4_WRITE_CLASS_OF_DEVICE,
HCI_INIT_WRITE_LOCAL_NAME,
HCI_INIT_W4_WRITE_LOCAL_NAME,
HCI_INIT_WRITE_SCAN_ENABLE,
HCI_INIT_W4_WRITE_SCAN_ENABLE,
HCI_INIT_WRITE_SYNCHRONOUS_FLOW_CONTROL_ENABLE,
HCI_INIT_W4_WRITE_SYNCHRONOUS_FLOW_CONTROL_ENABLE,
HCI_INIT_LE_READ_BUFFER_SIZE,
HCI_INIT_W4_LE_READ_BUFFER_SIZE,
HCI_INIT_WRITE_LE_HOST_SUPPORTED,
HCI_INIT_W4_WRITE_LE_HOST_SUPPORTED,
HCI_INIT_READ_WHITE_LIST_SIZE,
HCI_INIT_W4_READ_WHITE_LIST_SIZE,
HCI_INIT_LE_SET_SCAN_PARAMETERS,
HCI_INIT_W4_LE_SET_SCAN_PARAMETERS,
HCI_INIT_DONE,
HCI_FALLING_ASLEEP_DISCONNECT,
HCI_FALLING_ASLEEP_W4_WRITE_SCAN_ENABLE,
HCI_FALLING_ASLEEP_COMPLETE,
HCI_INIT_AFTER_SLEEP
} hci_substate_t;
enum {
LE_ADVERTISEMENT_TASKS_DISABLE = 1 << 0,
LE_ADVERTISEMENT_TASKS_SET_DATA = 1 << 1,
LE_ADVERTISEMENT_TASKS_SET_PARAMS = 1 << 2,
LE_ADVERTISEMENT_TASKS_ENABLE = 1 << 3,
};
enum {
LE_WHITELIST_ON_CONTROLLER = 1 << 0,
LE_WHITELIST_ADD_TO_CONTROLLER = 1 << 1,
LE_WHITELIST_REMOVE_FROM_CONTROLLER = 1 << 2,
};
typedef struct {
linked_item_t item;
bd_addr_t address;
bd_addr_type_t address_type;
uint8_t state;
} whitelist_entry_t;
/**
* main data structure
*/
typedef struct {
// transport component with configuration
hci_transport_t * hci_transport;
void * config;
// basic configuration
const char * local_name;
uint32_t class_of_device;
bd_addr_t local_bd_addr;
uint8_t ssp_enable;
uint8_t ssp_io_capability;
uint8_t ssp_authentication_requirement;
uint8_t ssp_auto_accept;
// hardware power controller
bt_control_t * control;
// list of existing baseband connections
bk_linked_list_t connections;
// single buffer for HCI packet assembly + additional prebuffer for H4 drivers
uint8_t hci_packet_buffer_prefix[HCI_OUTGOING_PRE_BUFFER_SIZE];
uint8_t hci_packet_buffer[HCI_PACKET_BUFFER_SIZE]; // opcode (16), len(8)
uint8_t hci_packet_buffer_reserved;
uint16_t acl_fragmentation_pos;
uint16_t acl_fragmentation_total_size;
/* host to controller flow control */
uint8_t num_cmd_packets;
uint8_t acl_packets_total_num;
uint16_t acl_data_packet_length;
uint8_t sco_packets_total_num;
uint8_t sco_data_packet_length;
uint8_t synchronous_flow_control_enabled;
uint8_t le_acl_packets_total_num;
uint16_t le_data_packets_length;
/* local supported features */
uint8_t local_supported_features[8];
/* local supported commands summary - complete info is 64 bytes */
/* 0 - read buffer size */
/* 1 - write le host supported */
uint8_t local_supported_commands[1];
/* bluetooth device information from hci read local version information */
// uint16_t hci_version;
// uint16_t hci_revision;
// uint16_t lmp_version;
uint16_t manufacturer;
// uint16_t lmp_subversion;
// usable packet types given acl_data_packet_length and HCI_ACL_BUFFER_SIZE
uint16_t packet_types;
/* callback to L2CAP layer */
void (*packet_handler)(uint8_t packet_type, uint8_t *packet, uint16_t size);
/* callback for SCO data */
void (*sco_packet_handler)(uint8_t packet_type, uint8_t *packet, uint16_t size);
/* remote device db */
remote_device_db_t const*remote_device_db;
/* hci state machine */
HCI_STATE state;
hci_substate_t substate;
timer_source_t timeout;
uint8_t cmds_ready;
uint16_t last_cmd_opcode;
uint8_t discoverable;
uint8_t connectable;
uint8_t bondable;
/* buffer for scan enable cmd - 0xff no change */
uint8_t new_scan_enable_value;
uint16_t sco_voice_setting;
uint8_t loopback_mode;
// buffer for single connection decline
uint8_t decline_reason;
bd_addr_t decline_addr;
uint8_t adv_addr_type;
bd_addr_t adv_address;
le_scanning_state_t le_scanning_state;
le_connecting_state_t le_connecting_state;
// buffer for le scan type command - 0xff not set
uint8_t le_scan_type;
uint16_t le_scan_interval;
uint16_t le_scan_window;
le_connection_parameter_range_t le_connection_parameter_range;
uint8_t * le_advertisements_data;
uint8_t le_advertisements_data_len;
uint8_t le_advertisements_active;
uint8_t le_advertisements_enabled;
uint8_t le_advertisements_todo;
uint16_t le_advertisements_interval_min;
uint16_t le_advertisements_interval_max;
uint8_t le_advertisements_type;
uint8_t le_advertisements_own_address_type;
uint8_t le_advertisements_direct_address_type;
uint8_t le_advertisements_channel_map;
uint8_t le_advertisements_filter_policy;
bd_addr_t le_advertisements_direct_address;
// LE Whitelist Management
uint16_t le_whitelist_capacity;
bk_linked_list_t le_whitelist;
// custom BD ADDR
bd_addr_t custom_bd_addr;
uint8_t custom_bd_addr_set;
// hardware error handler
void (*hardware_error_callback)(void);
} hci_stack_t;
/**
* set connection iterator
*/
void hci_connections_get_iterator(linked_list_iterator_t *it);
// create and send hci command packets based on a template and a list of parameters
uint16_t hci_create_cmd(uint8_t *hci_cmd_buffer, hci_cmd_t *cmd, ...);
uint16_t hci_create_cmd_internal(uint8_t *hci_cmd_buffer, const hci_cmd_t *cmd, va_list argptr);
/**
* run the hci control loop once
*/
void hci_run(void);
// send ACL packet prepared in hci packet buffer
int hci_send_acl_packet_buffer(int size);
// send SCO packet prepared in hci packet buffer
int hci_send_sco_packet_buffer(int size);
int hci_can_send_acl_packet_now(hci_con_handle_t con_handle);
int hci_can_send_prepared_acl_packet_now(hci_con_handle_t con_handle);
int hci_can_send_sco_packet_now(hci_con_handle_t con_handle);
int hci_can_send_prepared_sco_packet_now(hci_con_handle_t con_handle);
// reserves outgoing packet buffer. @returns 1 if successful
int hci_reserve_packet_buffer(void);
void hci_release_packet_buffer(void);
// used for internal checks in l2cap[-le].c
int hci_is_packet_buffer_reserved(void);
// get point to packet buffer
uint8_t* hci_get_outgoing_packet_buffer(void);
hci_connection_t * hci_connection_for_handle(hci_con_handle_t con_handle);
hci_connection_t * hci_connection_for_bd_addr_and_type(bd_addr_t addr, bd_addr_type_t addr_type);
int hci_is_le_connection(hci_connection_t * connection);
uint8_t hci_number_outgoing_packets(hci_con_handle_t handle);
uint8_t hci_number_free_acl_slots_for_handle(hci_con_handle_t con_handle);
int hci_authentication_active_for_handle(hci_con_handle_t handle);
uint16_t hci_max_acl_data_packet_length(void);
uint16_t hci_max_acl_le_data_packet_length(void);
uint16_t hci_usable_acl_packet_types(void);
int hci_non_flushable_packet_boundary_flag_supported(void);
void hci_disconnect_all(void);
void hci_emit_state(void);
void hci_emit_connection_complete(hci_connection_t *conn, uint8_t status);
void hci_emit_l2cap_check_timeout(hci_connection_t *conn);
void hci_emit_disconnection_complete(uint16_t handle, uint8_t reason);
void hci_emit_nr_connections_changed(void);
void hci_emit_hci_open_failed(void);
void hci_emit_btstack_version(void);
void hci_emit_system_bluetooth_enabled(uint8_t enabled);
void hci_emit_remote_name_cached(bd_addr_t addr, device_name_t *name);
void hci_emit_discoverable_enabled(uint8_t enabled);
void hci_emit_security_level(hci_con_handle_t con_handle, gap_security_level_t level);
void hci_emit_dedicated_bonding_result(bd_addr_t address, uint8_t status);
// query if the local side supports SSP
int hci_local_ssp_activated(void);
// query if the remote side supports SSP
int hci_remote_ssp_supported(hci_con_handle_t con_handle);
// query if both sides support SSP
int hci_ssp_supported_on_both_sides(hci_con_handle_t handle);
// disable automatic L2CAP disconnect for testing
void hci_disable_l2cap_timeout_check(void);
// disconnect because of security block
void hci_disconnect_security_block(hci_con_handle_t con_handle);
// send complete CMD packet
int hci_send_cmd_packet(uint8_t *packet, int size);
// query if remote side supports eSCO
int hci_remote_eSCO_supported(hci_con_handle_t con_handle);
/* API_START */
void gap_le_get_connection_parameter_range(le_connection_parameter_range_t range);
void gap_le_set_connection_parameter_range(le_connection_parameter_range_t range);
/* LE Client Start */
uint8_t le_central_start_scan(void);
uint8_t le_central_stop_scan(void);
uint8_t le_central_connect(bd_addr_t addr, bd_addr_type_t addr_type);
uint8_t le_central_connect_cancel(void);
uint8_t gap_disconnect(hci_con_handle_t handle);
void le_central_set_scan_parameters(uint8_t scan_type, uint16_t scan_interval, uint16_t scan_window);
/* LE Client End */
void hci_connectable_control(uint8_t enable);
void hci_close(void);
/**
* @note New functions replacing: hci_can_send_packet_now[_using_packet_buffer]
*/
int hci_can_send_command_packet_now(void);
/**
* @brief Gets local address.
*/
void hci_local_bd_addr(bd_addr_t address_buffer);
/**
* @brief Set up HCI. Needs to be called before any other function.
*/
void hci_init(hci_transport_t *transport, void *config, bt_control_t *control, remote_device_db_t const* remote_device_db);
/**
* @brief Set class of device that will be set during Bluetooth init.
*/
void hci_set_class_of_device(uint32_t class_of_device);
/**
* @brief Set Public BD ADDR - passed on to Bluetooth chipset if supported in bt_control_h
*/
void hci_set_bd_addr(bd_addr_t addr);
/**
* @brief Registers a packet handler. Used if L2CAP is not used (rarely).
*/
void hci_register_packet_handler(void (*handler)(uint8_t packet_type, uint8_t *packet, uint16_t size));
/**
* @brief Registers a packet handler for SCO data. Used for HSP and HFP profiles.
*/
void hci_register_sco_packet_handler(void (*handler)(uint8_t packet_type, uint8_t *packet, uint16_t size));
/**
* @brief Requests the change of BTstack power mode.
*/
int hci_power_control(HCI_POWER_MODE mode);
/**
* @brief Allows to control if device is discoverable. OFF by default.
*/
void hci_discoverable_control(uint8_t enable);
/**
* @brief Creates and sends HCI command packets based on a template and a list of parameters. Will return error if outgoing data buffer is occupied.
*/
int hci_send_cmd(const hci_cmd_t *cmd, ...);
/**
* @brief Deletes link key for remote device with baseband address.
*/
void hci_drop_link_key_for_bd_addr(bd_addr_t addr);
/* Configure Secure Simple Pairing */
/**
* @brief Enable will enable SSP during init.
*/
void hci_ssp_set_enable(int enable);
/**
* @brief If set, BTstack will respond to io capability request using authentication requirement.
*/
void hci_ssp_set_io_capability(int ssp_io_capability);
void hci_ssp_set_authentication_requirement(int authentication_requirement);
/**
* @brief If set, BTstack will confirm a numeric comparison and enter '000000' if requested.
*/
void hci_ssp_set_auto_accept(int auto_accept);
/**
* @brief Get addr type and address used in advertisement packets.
*/
void hci_le_advertisement_address(uint8_t * addr_type, bd_addr_t addr);
/**
* @brief Set callback for Bluetooth Hardware Error
*/
void hci_set_hardware_error_callback(void (*fn)(void));
/**
* @brief Configure Voice Setting for use with SCO data in HSP/HFP
*/
void hci_set_sco_voice_setting(uint16_t voice_setting);
/**
* @brief Get SCO Voice Setting
* @return current voice setting
*/
uint16_t hci_get_sco_voice_setting(void);
/** @brief Get SCO packet length for current SCO Voice setting
* @note Using SCO packets of the exact length is required for USB transfer
* @return Length of SCO packets in bytes (not audio frames) incl. 3 byte header
*/
int hci_get_sco_packet_length(void);
/* API_END */
/**
* @brief Set Advertisement Parameters
* @param adv_int_min
* @param adv_int_max
* @param adv_type
* @param own_address_type
* @param direct_address_type
* @param direct_address
* @param channel_map
* @param filter_policy
*
* @note internal use. use gap_advertisements_set_params from gap_le.h instead.
*/
void hci_le_advertisements_set_params(uint16_t adv_int_min, uint16_t adv_int_max, uint8_t adv_type,
uint8_t own_address_type, uint8_t direct_address_typ, bd_addr_t direct_address,
uint8_t channel_map, uint8_t filter_policy);
#if defined __cplusplus
}
#endif
#endif // __HCI_H
Reference in New Issue View Git Blame Copy Permalink