#==============================================================================
# (C) Copyright Albis Technologies Ltd 2011
#==============================================================================
#                Example Code
#==============================================================================
# File name:     project.settings
#
# Notes:         -
#==============================================================================

# Choose evaluation board. Available:
#   EVAL_BOARD=MICRIUM (UM0780)
#   EVAL_BOARD=OLIMEX (STM32-P107)
EVAL_BOARD=MICRIUM

# Choose Bluetooth chipset. Available:
#   BT_CHIPSET=CSR_BC4 (CSR BlueCore4)
#   BT_CHIPSET=PAN1315 (Panasonic PAN1315)
BT_CHIPSET=CSR_BC4

# CSR BlueCore4 only : change to higher baud rate during initialisation.
# Set 0 for no change.
#   1 :  38400
#   2 :  57600
#   3 : 115200
#   4 : 230400
#   5 : 460800
#   6 : 500000
#   7 : 921600
ifeq ($(BT_CHIPSET),CSR_BC4)
  CSR_BC4_CHANGE_BAUDRATE_ID=6
endif

# Choose whether or not STM32 USART DMA in use [yes|no].
STM32_USART_DMA=no

# Notification LEDs.
#
#   Micrium STM32 evaluation board UM0780
#     Green  : PD13
#     Orange : PD14
#     Red    : PD15
#
#   Olimex STM32 evaluation board STM32-P107
#     Green  : PC6
#     Orange : PC7
#     Red    : none
ifeq ($(EVAL_BOARD),MICRIUM)
  LED_PORT=4
  LED_GREEN_PRESENT=1
  LED_GREEN=13
  LED_ORANGE_PRESENT=1
  LED_ORANGE=14
  LED_RED_PRESENT=1
  LED_RED=15
endif

ifeq ($(EVAL_BOARD),OLIMEX)
  LED_PORT=3
  LED_GREEN_PRESENT=1
  LED_GREEN=6
  LED_ORANGE_PRESENT=1
  LED_ORANGE=7
  LED_RED_PRESENT=0
  LED_RED=0
endif

LED_DEFINES=-DLED_PORT=$(LED_PORT)
LED_DEFINES+=-DLED_GREEN_PRESENT=$(LED_GREEN_PRESENT)
LED_DEFINES+=-DLED_GREEN=$(LED_GREEN)
LED_DEFINES+=-DLED_ORANGE_PRESENT=$(LED_ORANGE_PRESENT)
LED_DEFINES+=-DLED_ORANGE=$(LED_ORANGE)
LED_DEFINES+=-DLED_RED_PRESENT=$(LED_RED_PRESENT)
LED_DEFINES+=-DLED_RED=$(LED_RED)