% !TEX root = btstack_gettingstarted.tex
\section{RFCOMM}
\label{appendix:api_rfcomm}
$ $
\begin{lstlisting}
// Set up RFCOMM.
void rfcomm_init(void);

// Set security level required for incoming connections, need to be 
// called before registering services.
void rfcomm_set_required_security_level(gap_security_level_t security_level);

// Register packet handler.
void rfcomm_register_packet_handler(void (*handler)(void * connection, uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size));

// Creates RFCOMM connection (channel) to a given server channel on 
// a remote device with baseband address. A new baseband connection 
// will be initiated if necessary. This channel will automatically 
// provide enough credits to the remote side
void rfcomm_create_channel_internal(void * connection, bd_addr_t addr, uint8_t channel);

// Creates RFCOMM connection (channel) to a given server channel on 
// a remote device with baseband address. new baseband connection 
// will be initiated if necessary. This channel will use explicit 
// credit management. During channel establishment, an initial  
// amount of credits is provided.
void rfcomm_create_channel_with_initial_credits_internal(void * connection, bd_addr_t addr, uint8_t server_channel, uint8_t initial_credits);

// Disconencts RFCOMM channel with given identifier. 
void rfcomm_disconnect_internal(uint16_t rfcomm_cid);

// Registers RFCOMM service for a server channel and a maximum frame 
// size, and assigns a packet handler. On embedded systems, use NULL 
// for connection parameter. This channel provides automatically  
// enough credits to the remote side.
void rfcomm_register_service_internal(void * connection, uint8_t channel, uint16_t max_frame_size);

// Registers RFCOMM service for a server channel and a maximum frame 
// size, and assigns a packet handler. On embedded systems, use NULL 
// for connection parameter. This channel will use explicit credit
// management. During channel establishment, an initial amount of  
// credits is provided.
void rfcomm_register_service_with_initial_credits_internal(void * connection, uint8_t channel, uint16_t max_frame_size, uint8_t initial_credits);

// Unregister RFCOMM service.
void rfcomm_unregister_service_internal(uint8_t service_channel);

// Accepts/Deny incoming RFCOMM connection.
void rfcomm_accept_connection_internal(uint16_t rfcomm_cid);
void rfcomm_decline_connection_internal(uint16_t rfcomm_cid);

// Grant more incoming credits to the remote side for the given 
// RFCOMM channel identifier.
void rfcomm_grant_credits(uint16_t rfcomm_cid, uint8_t credits);

// Checks if RFCOMM can send packet. Returns yes if packet can be 
// sent.
int rfcomm_can_send_packet_now(uint16_t rfcomm_cid);

// Sends RFCOMM data packet to the RFCOMM channel with given 
// identifier.
int  rfcomm_send_internal(uint16_t rfcomm_cid, uint8_t *data, uint16_t len);

// Sends Local Lnie Status, see LINE_STATUS_..
int rfcomm_send_local_line_status(uint16_t rfcomm_cid, uint8_t line_status);

// Sned local modem status. see MODEM_STAUS_..
int rfcomm_send_modem_status(uint16_t rfcomm_cid, uint8_t modem_status);

// Configure remote port 
int rfcomm_send_port_configuration(uint16_t rfcomm_cid, rpn_baud_t baud_rate, rpn_data_bits_t data_bits, rpn_stop_bits_t stop_bits, rpn_parity_t parity, rpn_flow_control_t flow_control);

// Query remote port 
int rfcomm_query_port_configuration(uint16_t rfcomm_cid);

// Allow to create rfcomm packet in outgoing buffer.
int       rfcomm_reserve_packet_buffer(void);
void      rfcomm_release_packet_buffer(void);
uint8_t * rfcomm_get_outgoing_buffer(void);
uint16_t  rfcomm_get_max_frame_size(uint16_t rfcomm_cid);
int       rfcomm_send_prepared(uint16_t rfcomm_cid, uint16_t len);
\end{lstlisting}
\pagebreak