/************************************************************************
    Filename: hal_board.h

    Copyright 2008 Texas Instruments, Inc.
***************************************************************************/
#ifndef HAL_BOARD_H
#define HAL_BOARD_H

// LED 1 = P1.0
#define LED1_DIR P1DIR
#define LED1_OUT P1OUT
#define LED1_PIN BIT0

// LED 2 = P1.1
#define LED2_DIR P1DIR
#define LED2_OUT P1OUT
#define LED2_PIN BIT1

#define CLK_PORT_DIR      P11DIR
#define CLK_PORT_OUT      P11OUT
#define CLK_PORT_SEL      P11SEL

#define ACLK_PIN          BIT0
#define MCLK_PIN          BIT1
#define SMCLK_PIN         BIT2

#define XT1_XTAL_DIR      P7DIR
#define XT1_XTAL_SEL      P7SEL
#define XT1_XTAL_OUT      P7OUT

#define SYSCLK_1MHZ             0
#define SYSCLK_4MHZ             1
#define SYSCLK_8MHZ             2
#define SYSCLK_12MHZ            3
#define SYSCLK_16MHZ            4
#define SYSCLK_20MHZ            5
#define SYSCLK_25MHZ            6

#define DCO_MULT_1MHZ           30
#define DCO_MULT_4MHZ           122
#define DCO_MULT_8MHZ           244
#define DCO_MULT_12MHZ          366
#define DCO_MULT_16MHZ          488
#define DCO_MULT_20MHZ          610
#define DCO_MULT_25MHZ          763

#define DCORSEL_1MHZ            DCORSEL_2
#define DCORSEL_4MHZ            DCORSEL_4
#define DCORSEL_8MHZ            DCORSEL_4
#define DCORSEL_12MHZ           DCORSEL_5
#define DCORSEL_16MHZ           DCORSEL_5
#define DCORSEL_20MHZ           DCORSEL_6
#define DCORSEL_25MHZ           DCORSEL_7

// Due to erratum FLASH28 the expected VCORE settings, as follows,
// cannot be achieved. The Vcore setting should not be changed. 
//#define VCORE_1MHZ              PMMCOREV_0
//#define VCORE_4MHZ              PMMCOREV_0
//#define VCORE_8MHZ              PMMCOREV_0
//#define VCORE_12MHZ             PMMCOREV_0
//#define VCORE_16MHZ             PMMCOREV_1
//#define VCORE_20MHZ             PMMCOREV_2
//#define VCORE_25MHZ             PMMCOREV_3
#define VCORE_1MHZ              PMMCOREV_2
#define VCORE_4MHZ              PMMCOREV_2
#define VCORE_8MHZ              PMMCOREV_2
#define VCORE_12MHZ             PMMCOREV_2
#define VCORE_16MHZ             PMMCOREV_2

// Due to erratum FLASH28 the expected VCORE settings, as follows,
// cannot be achieved. The Vcore setting should not be changed.
//#define VCORE_1_35V             PMMCOREV_0
//#define VCORE_1_55V             PMMCOREV_1
#define VCORE_1_75V             PMMCOREV_2
//#define VCORE_1_85V             PMMCOREV_3

/*----------------------------------------------------------------
 *                  Function Prototypes
 *----------------------------------------------------------------
 */
 
void halBoardSetVCore(unsigned char level);
void halBoardDisableSVS(void);
void halBoardEnableSVS(void);
void halBoardStartXT1(void);
void halBoardSetSystemClock(unsigned char systemClockSpeed);
void halBoardOutputSystemClock(void);
void halBoardStopOutputSystemClock(void);
void halBoardInit(void);

#endif