/*
 * Copyright (C) 2014 BlueKitchen GmbH
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the copyright holders nor the names of
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 * 4. Any redistribution, use, or modification is done solely for
 *    personal benefit and not for any commercial purpose or for
 *    monetary gain.
 *
 * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL BLUEKITCHEN
 * GMBH OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * Please inquire about commercial licensing options at 
 * contact@bluekitchen-gmbh.com
 *
 */

#define BTSTACK_FILE__ "spp_and_gatt_counter.c"

// *****************************************************************************
/* EXAMPLE_START(spp_and_le_counter): Dual Mode - SPP and LE Counter
 * 
 * @text The SPP and LE Counter example combines the Bluetooth Classic SPP Counter
 * and the Bluetooth LE Counter into a single application.
 *
 * @text In this Section, we only point out the differences to the individual examples
 * and how the stack is configured.
 *
 * @text Note: To test, please run the example, and then: 
 *    - for SPP pair from a remote device, and open the Virtual Serial Port,
 *    - for LE use some GATT Explorer, e.g. LightBlue, BLExplr, to enable notifications.
 */
// *****************************************************************************

#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <inttypes.h>
 
#include "btstack.h"
#include "spp_and_gatt_counter.h"

#define RFCOMM_SERVER_CHANNEL 1
#define HEARTBEAT_PERIOD_MS 1000

static uint16_t  rfcomm_channel_id;
static uint8_t   spp_service_buffer[150];
static int       le_notification_enabled;
static hci_con_handle_t att_con_handle;

// THE Couner
static btstack_timer_source_t heartbeat;
static int  counter = 0;
static char counter_string[30];
static int  counter_string_len;

static btstack_packet_callback_registration_t hci_event_callback_registration;

#ifdef ENABLE_GATT_OVER_CLASSIC
static uint8_t gatt_service_buffer[70];
#endif

/*
 * @section Advertisements 
 *
 * @text The Flags attribute in the Advertisement Data indicates if a device is dual-mode or le-only.
 */
/* LISTING_START(advertisements): Advertisement data: Flag 0x02 indicates dual-mode device */
const uint8_t adv_data[] = {
    // Flags general discoverable
    0x02, BLUETOOTH_DATA_TYPE_FLAGS, 0x02,
    // Name
    0x0b, BLUETOOTH_DATA_TYPE_COMPLETE_LOCAL_NAME, 'L', 'E', ' ', 'C', 'o', 'u', 'n', 't', 'e', 'r', 
    // Incomplete List of 16-bit Service Class UUIDs -- FF10 - only valid for testing!
    0x03, BLUETOOTH_DATA_TYPE_INCOMPLETE_LIST_OF_16_BIT_SERVICE_CLASS_UUIDS, 0x10, 0xff,
};
/* LISTING_END */
uint8_t adv_data_len = sizeof(adv_data);


/* 
 * @section Packet Handler
 * 
 * @text The packet handler of the combined example is just the combination of the individual packet handlers.
 */

static void packet_handler (uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size){
    UNUSED(channel);

    bd_addr_t event_addr;
    uint8_t   rfcomm_channel_nr;
    uint16_t  mtu;
    int i;

	switch (packet_type) {
		case HCI_EVENT_PACKET:
			switch (hci_event_packet_get_type(packet)) {
                case HCI_EVENT_PIN_CODE_REQUEST:
                    // inform about pin code request
                    printf("Pin code request - using '0000'\n");
                    hci_event_pin_code_request_get_bd_addr(packet, event_addr);
                    gap_pin_code_response(event_addr, "0000");
                    break;

                case HCI_EVENT_USER_CONFIRMATION_REQUEST:
                    // inform about user confirmation request
                    printf("SSP User Confirmation Request with numeric value '%06"PRIu32"'\n", little_endian_read_32(packet, 8));
                    printf("SSP User Confirmation Auto accept\n");
                    break;

                case HCI_EVENT_DISCONNECTION_COMPLETE:
                    le_notification_enabled = 0;
                    break;

                case ATT_EVENT_CAN_SEND_NOW:
                    att_server_notify(att_con_handle, ATT_CHARACTERISTIC_0000FF11_0000_1000_8000_00805F9B34FB_01_VALUE_HANDLE, (uint8_t*) counter_string, counter_string_len);
                    break;

                case RFCOMM_EVENT_INCOMING_CONNECTION:
					// data: event (8), len(8), address(48), channel (8), rfcomm_cid (16)
                    rfcomm_event_incoming_connection_get_bd_addr(packet, event_addr); 
                    rfcomm_channel_nr = rfcomm_event_incoming_connection_get_server_channel(packet);
                    rfcomm_channel_id = rfcomm_event_incoming_connection_get_rfcomm_cid(packet);
                    printf("RFCOMM channel %u requested for %s\n", rfcomm_channel_nr, bd_addr_to_str(event_addr));
                    rfcomm_accept_connection(rfcomm_channel_id);
					break;
					
				case RFCOMM_EVENT_CHANNEL_OPENED:
					// data: event(8), len(8), status (8), address (48), server channel(8), rfcomm_cid(16), max frame size(16)
					if (rfcomm_event_channel_opened_get_status(packet)) {
                        printf("RFCOMM channel open failed, status 0x%02x\n", rfcomm_event_channel_opened_get_status(packet));
                    } else {
                        rfcomm_channel_id = rfcomm_event_channel_opened_get_rfcomm_cid(packet);
                        mtu = rfcomm_event_channel_opened_get_max_frame_size(packet);
                        printf("RFCOMM channel open succeeded. New RFCOMM Channel ID %u, max frame size %u\n", rfcomm_channel_id, mtu);
                    }
					break;

                case RFCOMM_EVENT_CAN_SEND_NOW:
                    rfcomm_send(rfcomm_channel_id, (uint8_t*) counter_string, counter_string_len);
                    break;

                case RFCOMM_EVENT_CHANNEL_CLOSED:
                    printf("RFCOMM channel closed\n");
                    rfcomm_channel_id = 0;
                    break;
                
                default:
                    break;
			}
            break;
                        
        case RFCOMM_DATA_PACKET:
            printf("RCV: '");
            for (i=0;i<size;i++){
                putchar(packet[i]);
            }
            printf("'\n");
            break;

        default:
            break;
	}
}

// ATT Client Read Callback for Dynamic Data
// - if buffer == NULL, don't copy data, just return size of value
// - if buffer != NULL, copy data and return number bytes copied
// @param offset defines start of attribute value
static uint16_t att_read_callback(hci_con_handle_t con_handle, uint16_t att_handle, uint16_t offset, uint8_t * buffer, uint16_t buffer_size){
    UNUSED(con_handle);

    if (att_handle == ATT_CHARACTERISTIC_0000FF11_0000_1000_8000_00805F9B34FB_01_VALUE_HANDLE){
        return att_read_callback_handle_blob((const uint8_t *)counter_string, counter_string_len, offset, buffer, buffer_size);
    }
    return 0;
}

// write requests
static int att_write_callback(hci_con_handle_t con_handle, uint16_t att_handle, uint16_t transaction_mode, uint16_t offset, uint8_t *buffer, uint16_t buffer_size){
    // ignore cancel sent for new connections
    if (transaction_mode == ATT_TRANSACTION_MODE_CANCEL) return 0;
    // find characteristic for handle
    switch (att_handle){
        case ATT_CHARACTERISTIC_0000FF11_0000_1000_8000_00805F9B34FB_01_CLIENT_CONFIGURATION_HANDLE:
            le_notification_enabled = little_endian_read_16(buffer, 0) == GATT_CLIENT_CHARACTERISTICS_CONFIGURATION_NOTIFICATION;
            att_con_handle = con_handle;
            return 0;
        case ATT_CHARACTERISTIC_0000FF11_0000_1000_8000_00805F9B34FB_01_VALUE_HANDLE:
            printf("Write on test characteristic: ");
            printf_hexdump(buffer, buffer_size);
            return 0;
        default:
            printf("WRITE Callback, handle %04x, mode %u, offset %u, data: ", con_handle, transaction_mode, offset);
            printf_hexdump(buffer, buffer_size);
            return 0;
    }
}

static void beat(void){
    counter++;
    counter_string_len = snprintf(counter_string, sizeof(counter_string), "BTstack counter %04u", counter);
    puts(counter_string);
}

/*
 * @section Heartbeat Handler
 * 
 * @text Similar to the packet handler, the heartbeat handler is the combination of the individual ones.
 * After updating the counter, it requests an ATT_EVENT_CAN_SEND_NOW and/or RFCOMM_EVENT_CAN_SEND_NOW
 */

 /* LISTING_START(heartbeat): Combined Heartbeat handler */
static void heartbeat_handler(struct btstack_timer_source *ts){

    if (rfcomm_channel_id || le_notification_enabled) {
        beat();
    }

    if (rfcomm_channel_id){
        rfcomm_request_can_send_now_event(rfcomm_channel_id);
    }

    if (le_notification_enabled) {
        att_server_request_can_send_now_event(att_con_handle);
    }

    btstack_run_loop_set_timer(ts, HEARTBEAT_PERIOD_MS);
    btstack_run_loop_add_timer(ts);
} 
/* LISTING_END */

/*
 * @section Main Application Setup
 *
 * @text As with the packet and the heartbeat handlers, the combined app setup contains the code from the individual example setups.
 */

/* LISTING_START(MainConfiguration): Init L2CAP RFCOMM SDO SM ATT Server and start heartbeat timer */
int btstack_main(void);
int btstack_main(void)
{
    l2cap_init();

    rfcomm_init();
    rfcomm_register_service(packet_handler, RFCOMM_SERVER_CHANNEL, 0xffff);

    // init SDP, create record for SPP and register with SDP
    sdp_init();
    memset(spp_service_buffer, 0, sizeof(spp_service_buffer));
    spp_create_sdp_record(spp_service_buffer, sdp_create_service_record_handle(), RFCOMM_SERVER_CHANNEL, "SPP Counter");
    btstack_assert(de_get_len( spp_service_buffer) <= sizeof(spp_service_buffer));
    sdp_register_service(spp_service_buffer);

#ifdef ENABLE_GATT_OVER_CLASSIC
    // init SDP, create record for GATT and register with SDP
    memset(gatt_service_buffer, 0, sizeof(gatt_service_buffer));
    gatt_create_sdp_record(gatt_service_buffer, 0x10001, ATT_SERVICE_GATT_SERVICE_START_HANDLE, ATT_SERVICE_GATT_SERVICE_END_HANDLE);
    sdp_register_service(gatt_service_buffer);
    printf("SDP service record size: %u\n", de_get_len(gatt_service_buffer));
#endif

    gap_set_local_name("SPP and LE Counter 00:00:00:00:00:00");
    gap_ssp_set_io_capability(SSP_IO_CAPABILITY_DISPLAY_YES_NO);
    gap_discoverable_control(1);

    // setup SM: Display only
    sm_init();

    // setup ATT server
    att_server_init(profile_data, att_read_callback, att_write_callback);    

    // register for HCI events
    hci_event_callback_registration.callback = &packet_handler;
    hci_add_event_handler(&hci_event_callback_registration);

    // register for ATT events
    att_server_register_packet_handler(packet_handler);

    // setup advertisements
    uint16_t adv_int_min = 0x0030;
    uint16_t adv_int_max = 0x0030;
    uint8_t adv_type = 0;
    bd_addr_t null_addr;
    memset(null_addr, 0, 6);
    gap_advertisements_set_params(adv_int_min, adv_int_max, adv_type, 0, null_addr, 0x07, 0x00);
    gap_advertisements_set_data(adv_data_len, (uint8_t*) adv_data);
    gap_advertisements_enable(1);

    // set one-shot timer
    heartbeat.process = &heartbeat_handler;
    btstack_run_loop_set_timer(&heartbeat, HEARTBEAT_PERIOD_MS);
    btstack_run_loop_add_timer(&heartbeat);

    // beat once
    beat();

    // turn on!
	hci_power_control(HCI_POWER_ON);
	    
    return 0;
}
/* LISTING_END */
/* EXAMPLE_END */