/* * Copyright (C) 2014 BlueKitchen GmbH * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the copyright holders nor the names of * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * 4. Any redistribution, use, or modification is done solely for * personal benefit and not for any commercial purpose or for * monetary gain. * * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Please inquire about commercial licensing options at * contact@bluekitchen-gmbh.com * */ // ***************************************************************************** // // GSM model (!! UNDER DEVELOPMENT !!) // // ***************************************************************************** #ifndef BTSTACK_HFP_GSM_MODEL_H #define BTSTACK_HFP_GSM_MODEL_H #include "hci.h" #include "sdp_query_rfcomm.h" #include "hfp.h" #if defined __cplusplus extern "C" { #endif /* API_START */ /** * @brief */ hfp_callheld_status_t hfp_gsm_callheld_status(); hfp_call_status_t hfp_gsm_call_status(); hfp_callsetup_status_t hfp_gsm_callsetup_status(); int hfp_gsm_call_possible(void); void hfp_gsm_init(void); void hfp_gsm_handle_event(hfp_ag_call_event_t event); // /** // * @brief // */ // void hfp_gsm_incoming_call(void); // / // /** // * @brief Report the change in AG's call status. // * Call status: // * - 0 = No calls (held or active) // * - 1 = Call is present (active or held) // */ // void hfp_gsm_transfer_call_status(bd_addr_t bd_addr, hfp_call_status_t status); // /** // * @brief Report the change in AG's call setup status. // * Call setup status: // * - 0 = No call setup in progress // * - 1 = Incoming call setup in progress // * - 2 = Outgoing call setup in dialing state // * - 3 = Outgoing call setup in alerting state // */ // void hfp_gsm_transfer_callsetup_status(bd_addr_t bd_addr, hfp_callsetup_status_t status); // /** // * @brief Report the change in AG's held call status. // * Held call status: // * - 0 = No calls held // * - 1 = Call is placed on hold or active/held calls are swapped // * - 2 = Call on hold, no active calls // */ // void hfp_gsm_transfer_callheld_status(bd_addr_t bd_addr, hfp_callheld_status_t status); // /** // * @brief Enable in-band ring tone // */ // void hfp_gsm_set_use_in_band_ring_tone(int use_in_band_ring_tone); // /** // * @brief number is stored. // */ // void hfp_gsm_set_clip(uint8_t type, const char * number); // /** // * @brief // */ // void hfp_gsm_outgoing_call_rejected(void); // /** // * @brief // */ // void hfp_gsm_outgoing_call_accepted(void); // /** // * @brief // */ // void hfp_gsm_outgoing_call_ringing(void); // /** // * @brief // */ // void hfp_gsm_outgoing_call_established(void); // * // * @brief // void hfp_gsm_call_dropped(void); // /** // * @brief // */ // void hfp_gsm_answer_incoming_call(void); // /** // * @brief // */ // void hfp_gsm_join_held_call(void); // /** // * @brief // */ // void hfp_gsm_terminate_call(void); // /* // * @brief // */ // void hfp_gsm_set_registration_status(int status); // /* // * @brief // */ // void hfp_gsm_set_signal_strength(int strength); // /* // * @brief // */ // void hfp_gsm_set_roaming_status(int status); // /* // * @brief // */ // void hfp_gsm_activate_voice_recognition(bd_addr_t bd_addr, int activate); // /* // * @brief // */ // void hfp_gsm_send_phone_number_for_voice_tag(bd_addr_t bd_addr, const char * number); // /* // * @brief // */ // void hfp_gsm_reject_phone_number_for_voice_tag(bd_addr_t bd_addr); // /* // * @brief // */ // void hfp_gsm_send_dtmf_code_done(bd_addr_t bd_addr); // /* // * @brief // */ // void hfp_gsm_set_subcriber_number_information(hfp_phone_number_t * numbers, int numbers_count); // /* // * @brief // */ // void hfp_gsm_send_current_call_status(bd_addr_t bd_addr, int idx, hfp_enhanced_call_dir_t dir, // hfp_enhanced_call_status_t status, hfp_enhanced_call_mode_t mode, // hfp_enhanced_call_mpty_t mpty, uint8_t type, const char * number); // /* // * @brief // */ // void hfp_gsm_send_current_call_status_done(bd_addr_t bd_addr); // /* // * @brief // */ // void hfp_gsm_hold_incoming_call(void); // /* // * @brief // */ // void hfp_gsm_accept_held_incoming_call(void); // /* // * @brief // */ // void hfp_gsm_reject_held_incoming_call(void); /* API_END */ #if defined __cplusplus } #endif #endif