/* * Copyright (C) 2011-2012 by Matthias Ringwald * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the copyright holders nor the names of * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * 4. Any redistribution, use, or modification is done solely for * personal benefit and not for any commercial purpose or for * monetary gain. * * THIS SOFTWARE IS PROVIDED BY MATTHIAS RINGWALD AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Please inquire about commercial licensing options at btstack@ringwald.ch * */ #ifndef __ATT_H #define __ATT_H #include #if defined __cplusplus extern "C" { #endif // MARK: Attribute PDU Opcodes #define ATT_ERROR_RESPONSE 0x01 #define ATT_EXCHANGE_MTU_REQUEST 0x02 #define ATT_EXCHANGE_MTU_RESPONSE 0x03 #define ATT_FIND_INFORMATION_REQUEST 0x04 #define ATT_FIND_INFORMATION_REPLY 0x05 #define ATT_FIND_BY_TYPE_VALUE_REQUEST 0x06 #define ATT_FIND_BY_TYPE_VALUE_RESPONSE 0x07 #define ATT_READ_BY_TYPE_REQUEST 0x08 #define ATT_READ_BY_TYPE_RESPONSE 0x09 #define ATT_READ_REQUEST 0x0a #define ATT_READ_RESPONSE 0x0b #define ATT_READ_BLOB_REQUEST 0x0c #define ATT_READ_BLOB_RESPONSE 0x0d #define ATT_READ_MULTIPLE_REQUEST 0x0e #define ATT_READ_MULTIPLE_RESPONSE 0x0f #define ATT_READ_BY_GROUP_TYPE_REQUEST 0x10 #define ATT_READ_BY_GROUP_TYPE_RESPONSE 0x11 #define ATT_WRITE_REQUEST 0x12 #define ATT_WRITE_RESPONSE 0x13 #define ATT_PREPARE_WRITE_REQUEST 0x16 #define ATT_PREPARE_WRITE_RESPONSE 0x17 #define ATT_EXECUTE_WRITE_REQUEST 0x18 #define ATT_EXECUTE_WRITE_RESPONSE 0x19 #define ATT_HANDLE_VALUE_NOTIFICATION 0x1b #define ATT_HANDLE_VALUE_INDICATION 0x1d #define ATT_HANDLE_VALUE_CONFIRMATION 0x1e #define ATT_WRITE_COMMAND 0x52 #define ATT_SIGNED_WRITE_COMAND 0xD2 // MARK: ATT Error Codes #define ATT_ERROR_ATTRIBUTE_INVALID 0x01 #define ATT_ERROR_READ_NOT_PERMITTED 0x02 #define ATT_ERROR_WRITE_NOT_PERMITTED 0x03 #define ATT_ERROR_INVALID_PDU 0x04 #define ATT_ERROR_INSUFFICIENT_AUTHENTICATION 0x05 #define ATT_ERROR_REQUEST_NOT_SUPPORTED 0x06 #define ATT_ERROR_INVALID_OFFSET 0x07 #define ATT_ERROR_INSUFFICIENT_AUTHORIZATION 0x08 #define ATT_ERROR_PREPARE_QUEUE_FULL 0x09 #define ATT_ERROR_ATTRIBUTE_NOT_FOUND 0x0a #define ATT_ERROR_ATTRIBUTE_NOT_LONG 0x0b #define ATT_ERROR_INSUFFICIENT_ENCRYPTION_KEY_SIZE 0x0c #define ATT_ERROR_INVALID_ATTRIBUTE_VALUE_LENGTH 0x0d #define ATT_ERROR_UNLIKELY_ERROR 0x0e #define ATT_ERROR_INSUFFICIENT_ENCRYPTION 0x0f #define ATT_ERROR_UNSUPPORTED_GROUP_TYPE 0x10 #define ATT_ERROR_INSUFFICIENT_RESOURCES 0x11 // MARK: Attribute Property Flags #define ATT_PROPERTY_BROADCAST 0x01 #define ATT_PROPERTY_READ 0x02 #define ATT_PROPERTY_WRITE_WITHOUT_RESPONSE 0x04 #define ATT_PROPERTY_WRITE 0x08 #define ATT_PROPERTY_NOTIFY 0x10 #define ATT_PROPERTY_INDICATE 0x20 #define ATT_PROPERTY_AUTHENTICATED_SIGNED_WRITE 0x40 #define ATT_PROPERTY_EXTENDED_PROPERTIES 0x80 // MARK: Attribute Property Flag, BTstack extension // value is asked from client #define ATT_PROPERTY_DYNAMIC 0x100 // 128 bit UUID used #define ATT_PROPERTY_UUID128 0x200 // Authentication required #define ATT_PROPERTY_AUTHENTICATION_REQUIRED 0x400 // Authorization from user required #define ATT_PROPERTY_AUTHORIZATION_REQUIRED 0x800 // Encryption key size stored in upper 4 bits, 0 == no encryption, encryption key size - 1 otherwise // ATT Transaxtion Timeout of 30 seconds for Command/Response or Incidationc/Confirmation #define ATT_TRANSACTION_TIMEOUT_MS 30000 #define ATT_TRANSACTION_MODE_NONE 0x0 #define ATT_TRANSACTION_MODE_ACTIVE 0x1 #define ATT_TRANSACTION_MODE_EXECUTE 0x2 #define ATT_TRANSACTION_MODE_CANCEL 0x3 // MARK: GATT UUIDs #define GATT_PRIMARY_SERVICE_UUID 0x2800 #define GATT_SECONDARY_SERVICE_UUID 0x2801 #define GATT_INCLUDE_SERVICE_UUID 0x2802 #define GATT_CHARACTERISTICS_UUID 0x2803 #define GAP_SERVICE_UUID 0x1800 #define GAP_DEVICE_NAME_UUID 0x2a00 typedef struct att_connection { uint16_t mtu; uint8_t encryption_key_size; uint8_t authenticated; uint8_t authorized; } att_connection_t; typedef uint8_t signature_t[12]; // ATT Client Read Callback for Dynamic Data // - if buffer == NULL, don't copy data, just return size of value // - if buffer != NULL, copy data and return number bytes copied // @param offset defines start of attribute value typedef uint16_t (*att_read_callback_t)(uint16_t handle, uint16_t offset, uint8_t * buffer, uint16_t buffer_size); // ATT Client Write Callback for Dynamic Data // @param handle to be written // @param transaction - ATT_TRANSACTION_MODE_NONE for regular writes, ATT_TRANSACTION_MODE_ACTIVE for prepared writes and ATT_TRANSACTION_MODE_EXECUTE // @param offset into the value - used for queued writes and long attributes // @param buffer // @param buffer_size // @param signature used for signed write commmands // @returns 0 if write was ok, ATT_ERROR_PREPARE_QUEUE_FULL if no space in queue, ATT_ERROR_INVALID_OFFSET if offset is larger than max buffer typedef int (*att_write_callback_t)(uint16_t handle, uint16_t transaction_mode, uint16_t offset, uint8_t *buffer, uint16_t buffer_size, signature_t * signature); // MARK: ATT Operations /* * @brief setup ATT database */ void att_set_db(uint8_t const * db); /* * @brief set callback for read of dynamic attributes * @param callback */ void att_set_read_callback(att_read_callback_t callback); /* * @brief set callback for write of dynamic attributes * @param callback */ void att_set_write_callback(att_write_callback_t callback); /* * @brief debug helper, dump ATT database to stdout using printf */ void att_dump_attributes(void); /* * @brief process ATT request against database and put response into response buffer * @param att_connection used for mtu and security properties * @param request_buffer, request_len: ATT request from clinet * @param response_buffer for result * @returns len of data in response buffer. 0 = no response */ uint16_t att_handle_request(att_connection_t * att_connection, uint8_t * request_buffer, uint16_t request_len, uint8_t * response_buffer); /* * @brief setup value notification in response buffer for a given handle and value * @param att_connection * @param value, value_len: new attribute value * @param response_buffer for notification */ uint16_t att_prepare_handle_value_notification(att_connection_t * att_connection, uint16_t handle, uint8_t *value, uint16_t value_len, uint8_t * response_buffer); /* * @brief setup value indication in response buffer for a given handle and value * @param att_connection * @param value, value_len: new attribute value * @param response_buffer for indication */ uint16_t att_prepare_handle_value_indication(att_connection_t * att_connection, uint16_t handle, uint8_t *value, uint16_t value_len, uint8_t * response_buffer); /* * @brief transcation queue of prepared writes, e.g., after disconnect */ void att_clear_transaction_queue(); #if defined __cplusplus } #endif #endif // __ATT_H