nrf5-zephyr: drop remaining patches to zephyr sources. Set Static Random Address directly in main(). Drop previous hack in sm.c

port/nrf5-zephyr/hci_firmware.patch

@@ -1,35 +0,0 @@
-diff --git a/subsys/bluetooth/controller/ll_sw/ctrl.h b/subsys/bluetooth/controller/ll_sw/ctrl.h
-index ecec3ccc3..88cdba5fc 100644
---- a/subsys/bluetooth/controller/ll_sw/ctrl.h
-+++ b/subsys/bluetooth/controller/ll_sw/ctrl.h
-@@ -128,7 +128,7 @@
- #if defined(CONFIG_BT_CTLR_COMPANY_ID)
- #define RADIO_BLE_COMPANY_ID            CONFIG_BT_CTLR_COMPANY_ID
- #else
--#define RADIO_BLE_COMPANY_ID            0xFFFF
-+#define RADIO_BLE_COMPANY_ID (0x0059) // Nordic Semiconductor ASA
- #endif
- #if defined(CONFIG_BT_CTLR_SUBVERSION_NUMBER)
- #define RADIO_BLE_SUB_VERSION_NUMBER \
-diff --git a/subsys/Kconfig b/subsys/Kconfig
-index 4966a0b81..546713963 100644
---- a/subsys/Kconfig
-+++ b/subsys/Kconfig
-@@ -24,3 +24,5 @@ source "subsys/net/Kconfig"
- source "subsys/shell/Kconfig"
- 
- source "subsys/usb/Kconfig"
-+
-+source "subsys/btstack/Kconfig"
-diff --git a/subsys/Makefile b/subsys/Makefile
-index a9a2aa153..94da28f17 100644
---- a/subsys/Makefile
-+++ b/subsys/Makefile
-@@ -1,6 +1,7 @@
- obj-$(CONFIG_FILE_SYSTEM) += fs/
- obj-$(CONFIG_USB) += usb/
- obj-$(CONFIG_BT) += bluetooth/
-+obj-$(CONFIG_BTSTACK) += btstack/
- obj-$(CONFIG_NET_BUF) += net/
- obj-$(CONFIG_CONSOLE_SHELL) += shell/
- obj-$(CONFIG_CONSOLE_PULL) += console/

port/nrf5-zephyr/integrate_btstack.sh

@@ -4,15 +4,6 @@ ZEPHYR_BASE=../../..
 
 echo "Integrating BTstack into Zephyr"
 
-if grep -q -F "NRF_FICR->DEVICEADDR" ${ZEPHYR_BASE}/samples/bluetooth/hci_uart/src/main.c; then
-	echo "HCI Firmware patch already installed"
-else
-	# assert files don't exist since patch would get irritated
-	echo "Applying HCI Firmware patch"
-	rm -f ${ZEPHYR_BASE}/samples/bluetooth/hci_uart/flash*
-	cat hci_firmware.patch | patch -d ${ZEPHYR_BASE} -p1
-fi
-
 echo "Adding subsys/btstack"
 
 # add btstack folder to subsys/Makefile
@@ -48,7 +39,6 @@ rsync -a Kconfig ${ZEPHYR_BASE}/subsys/btstack
 
 # copy Makefiles
 rsync -a Makefile.src 	        ${ZEPHYR_BASE}/subsys/btstack/Makefile
-rsync -a Makefile.classic 	    ${ZEPHYR_BASE}/subsys/btstack/classic/Makefile
 rsync -a Makefile.ble 	        ${ZEPHYR_BASE}/subsys/btstack/ble/Makefile
 rsync -a Makefile.gatt-service  ${ZEPHYR_BASE}/subsys/btstack/ble/gatt-service/Makefile
 rsync -a Makefile.bluedroid 	${ZEPHYR_BASE}/subsys/btstack/bluedroid/Makefile

port/nrf5-zephyr/main.c

@@ -285,11 +285,13 @@ const btstack_run_loop_t * btstack_run_loop_zephyr_get_instance(void){
 
 static btstack_packet_callback_registration_t hci_event_callback_registration;
 
+static bd_addr_t static_address;
+
 static void packet_handler (uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size){
     if (packet_type != HCI_EVENT_PACKET) return;
     if (hci_event_packet_get_type(packet) != BTSTACK_EVENT_STATE) return;
     if (btstack_event_state_get_state(packet) != HCI_STATE_WORKING) return;
-    printf("BTstack up and running.\n");
+    printf("BTstack up and running as %s.\n", bd_addr_to_str(static_address));
 }
 
 int btstack_main(void);
@@ -303,7 +305,6 @@ void bt_ctlr_assert_handle(char *file, u32_t line)
 }
 #endif /* CONFIG_BT_CTLR_ASSERT_HANDLER */
 
-
 void main(void)
 {
 	// configure console UART by replacing CONFIG_UART_NRF5_BAUD_RATE with 115200 in uart_console.c
@@ -320,23 +321,12 @@ void main(void)
     // init HCI
     hci_init(transport_get_instance(), NULL);
 
-#if 1
     // nRF5 chipsets don't have an official public address
-    // Instead, they use a Static Random Address set in the factory
+    // Instead, a Static Random Address is assigned during manufacturing
-    bd_addr_t addr;
+    // let's use it as well
-#if 0
+    big_endian_store_16(static_address, 0, NRF_FICR->DEVICEADDR[1] | 0xc000);
-    // set random static address
+    big_endian_store_32(static_address, 2, NRF_FICR->DEVICEADDR[0]);
-    big_endian_store_16(addr, 0, NRF_FICR->DEVICEADDR[1] | 0xc000);
+    gap_random_address_set(static_address);
-    big_endian_store_32(addr, 2, NRF_FICR->DEVICEADDR[0]);
-    gap_random_address_set(addr);
-    printf("Random Static Address: %s\n", bd_addr_to_str(addr));
-#else
-    // make Random Static Address available via HCI Read BD ADDR as fake public address
-    little_endian_store_32(addr, 0, NRF_FICR->DEVICEADDR[0]);
-    little_endian_store_16(addr, 4, NRF_FICR->DEVICEADDR[1] | 0xc000);
-    ll_addr_set(0, addr);
-#endif
-#endif
 
     // inform about BTstack state
     hci_event_callback_registration.callback = &packet_handler;

src/ble/sm.c

@@ -3275,17 +3275,9 @@ static void sm_event_packet_handler (uint8_t packet_type, uint16_t channel, uint
                         break;
                     }
                     if (HCI_EVENT_IS_COMMAND_COMPLETE(packet, hci_read_bd_addr)){
-                        // Hack for Nordic nRF5 series that doesn't have public address:
+                        // set local addr for le device db
-                        // - with patches from port/nrf5-zephyr, hci_read_bd_addr returns random static address
-                        // - we use this as default for advertisements/connections
                         bd_addr_t addr;
                         reverse_bd_addr(&packet[OFFSET_OF_DATA_IN_COMMAND_COMPLETE + 1], addr);
-                        if (hci_get_manufacturer() == BLUETOOTH_COMPANY_ID_NORDIC_SEMICONDUCTOR_ASA){
-                            log_info("nRF5: using (fake) public address as random static address");
-                            gap_random_address_set(addr);
-                        }
-
-                        // set local addr for le device db
                         le_device_db_set_local_bd_addr(addr);
                     }
                     if (HCI_EVENT_IS_COMMAND_COMPLETE(packet, hci_read_local_supported_commands)){