mirror of
https://github.com/bluekitchen/btstack.git
synced 2025-02-22 15:40:16 +00:00
port/stm32-f4discovery: fix indentation
This commit is contained in:
Dirk Helbig
Matthias Ringwald
parent
2ced7aa092
commit
78f32d1c41
@ -34,7 +34,7 @@ extern UART_HandleTypeDef huart3;
|
||||
static btstack_packet_callback_registration_t hci_event_callback_registration;
|
||||
|
||||
static const hci_transport_config_uart_t config = {
|
||||
HCI_TRANSPORT_CONFIG_UART,
|
||||
HCI_TRANSPORT_CONFIG_UART,
|
||||
115200,
|
||||
4000000,
|
||||
1,
|
||||
@ -44,23 +44,23 @@ static const hci_transport_config_uart_t config = {
|
||||
// hal_time_ms.h
|
||||
#include "hal_time_ms.h"
|
||||
uint32_t hal_time_ms(void){
|
||||
return HAL_GetTick();
|
||||
return HAL_GetTick();
|
||||
}
|
||||
|
||||
// hal_cpu.h implementation
|
||||
#include "hal_cpu.h"
|
||||
|
||||
void hal_cpu_disable_irqs(void){
|
||||
__disable_irq();
|
||||
__disable_irq();
|
||||
}
|
||||
|
||||
void hal_cpu_enable_irqs(void){
|
||||
__enable_irq();
|
||||
__enable_irq();
|
||||
}
|
||||
|
||||
void hal_cpu_enable_irqs_and_sleep(void){
|
||||
__enable_irq();
|
||||
__asm__("wfe"); // go to sleep if event flag isn't set. if set, just clear it. IRQs set event flag
|
||||
__enable_irq();
|
||||
__asm__("wfe"); // go to sleep if event flag isn't set. if set, just clear it. IRQs set event flag
|
||||
}
|
||||
|
||||
// hal_stdin.h
|
||||
@ -70,7 +70,7 @@ static void (*stdin_handler)(char c);
|
||||
void hal_stdin_setup(void (*handler)(char c)){
|
||||
stdin_handler = handler;
|
||||
// start receiving
|
||||
HAL_UART_Receive_IT(&huart2, &stdin_buffer[0], 1);
|
||||
HAL_UART_Receive_IT(&huart2, &stdin_buffer[0], 1);
|
||||
}
|
||||
|
||||
static void stdin_rx_complete(void){
|
||||
@ -97,54 +97,54 @@ static int hal_uart_needed_during_sleep;
|
||||
|
||||
void hal_uart_dma_set_sleep(uint8_t sleep){
|
||||
|
||||
// RTS is on PD12 - manually set it during sleep
|
||||
GPIO_InitTypeDef RTS_InitStruct;
|
||||
RTS_InitStruct.Pin = GPIO_PIN_12;
|
||||
// RTS is on PD12 - manually set it during sleep
|
||||
GPIO_InitTypeDef RTS_InitStruct;
|
||||
RTS_InitStruct.Pin = GPIO_PIN_12;
|
||||
RTS_InitStruct.Pull = GPIO_NOPULL;
|
||||
RTS_InitStruct.Alternate = GPIO_AF7_USART3;
|
||||
if (sleep){
|
||||
HAL_GPIO_WritePin(GPIOD, GPIO_PIN_12, GPIO_PIN_SET);
|
||||
RTS_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
RTS_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
} else {
|
||||
RTS_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
RTS_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
}
|
||||
if (sleep){
|
||||
HAL_GPIO_WritePin(GPIOD, GPIO_PIN_12, GPIO_PIN_SET);
|
||||
RTS_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
RTS_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
} else {
|
||||
RTS_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
RTS_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
}
|
||||
|
||||
HAL_GPIO_Init(GPIOD, &RTS_InitStruct);
|
||||
HAL_GPIO_Init(GPIOD, &RTS_InitStruct);
|
||||
|
||||
// if (sleep){
|
||||
// HAL_GPIO_WritePin(GPIOD, GPIO_PIN_12, GPIO_PIN_SET);
|
||||
// }
|
||||
hal_uart_needed_during_sleep = !sleep;
|
||||
// if (sleep){
|
||||
// HAL_GPIO_WritePin(GPIOD, GPIO_PIN_12, GPIO_PIN_SET);
|
||||
// }
|
||||
hal_uart_needed_during_sleep = !sleep;
|
||||
}
|
||||
|
||||
// reset Bluetooth using n_shutdown
|
||||
static void bluetooth_power_cycle(void){
|
||||
printf("Bluetooth power cycle\n");
|
||||
HAL_GPIO_WritePin( CC_nSHUTD_GPIO_Port, CC_nSHUTD_Pin, GPIO_PIN_RESET );
|
||||
HAL_Delay( 250 );
|
||||
HAL_GPIO_WritePin( CC_nSHUTD_GPIO_Port, CC_nSHUTD_Pin, GPIO_PIN_SET );
|
||||
HAL_Delay( 500 );
|
||||
printf("Bluetooth power cycle\n");
|
||||
HAL_GPIO_WritePin( CC_nSHUTD_GPIO_Port, CC_nSHUTD_Pin, GPIO_PIN_RESET );
|
||||
HAL_Delay( 250 );
|
||||
HAL_GPIO_WritePin( CC_nSHUTD_GPIO_Port, CC_nSHUTD_Pin, GPIO_PIN_SET );
|
||||
HAL_Delay( 500 );
|
||||
}
|
||||
|
||||
void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart){
|
||||
if (huart == &huart3){
|
||||
(*tx_done_handler)();
|
||||
}
|
||||
if (huart == &huart3){
|
||||
(*tx_done_handler)();
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart){
|
||||
if (huart == &huart3){
|
||||
(*rx_done_handler)();
|
||||
}
|
||||
if (huart == &huart3){
|
||||
(*rx_done_handler)();
|
||||
}
|
||||
if (huart == &huart2){
|
||||
stdin_rx_complete();
|
||||
}
|
||||
}
|
||||
|
||||
void hal_uart_dma_init(void){
|
||||
bluetooth_power_cycle();
|
||||
bluetooth_power_cycle();
|
||||
}
|
||||
void hal_uart_dma_set_block_received( void (*the_block_handler)(void)){
|
||||
rx_done_handler = the_block_handler;
|
||||
@ -155,44 +155,44 @@ void hal_uart_dma_set_block_sent( void (*the_block_handler)(void)){
|
||||
}
|
||||
|
||||
void EXTI15_10_IRQHandler(void){
|
||||
__HAL_GPIO_EXTI_CLEAR_IT(GPIO_PIN_11);
|
||||
if (cts_irq_handler){
|
||||
(*cts_irq_handler)();
|
||||
}
|
||||
__HAL_GPIO_EXTI_CLEAR_IT(GPIO_PIN_11);
|
||||
if (cts_irq_handler){
|
||||
(*cts_irq_handler)();
|
||||
}
|
||||
}
|
||||
|
||||
void hal_uart_dma_set_csr_irq_handler( void (*the_irq_handler)(void)){
|
||||
|
||||
GPIO_InitTypeDef CTS_InitStruct = {
|
||||
.Pin = GPIO_PIN_11,
|
||||
.Mode = GPIO_MODE_AF_PP,
|
||||
.Pull = GPIO_PULLUP,
|
||||
.Speed = GPIO_SPEED_FREQ_VERY_HIGH,
|
||||
.Alternate = GPIO_AF7_USART3,
|
||||
};
|
||||
GPIO_InitTypeDef CTS_InitStruct = {
|
||||
.Pin = GPIO_PIN_11,
|
||||
.Mode = GPIO_MODE_AF_PP,
|
||||
.Pull = GPIO_PULLUP,
|
||||
.Speed = GPIO_SPEED_FREQ_VERY_HIGH,
|
||||
.Alternate = GPIO_AF7_USART3,
|
||||
};
|
||||
|
||||
if( the_irq_handler ) {
|
||||
/* Configure the EXTI11 interrupt (USART3_CTS is on PD11) */
|
||||
HAL_NVIC_EnableIRQ( EXTI15_10_IRQn );
|
||||
CTS_InitStruct.Mode = GPIO_MODE_IT_RISING;
|
||||
CTS_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init( GPIOD, &CTS_InitStruct );
|
||||
log_info("enabled CTS irq");
|
||||
}
|
||||
else {
|
||||
CTS_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
CTS_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init( GPIOD, &CTS_InitStruct );
|
||||
HAL_NVIC_DisableIRQ( EXTI15_10_IRQn );
|
||||
log_info("disabled CTS irq");
|
||||
}
|
||||
if( the_irq_handler ) {
|
||||
/* Configure the EXTI11 interrupt (USART3_CTS is on PD11) */
|
||||
HAL_NVIC_EnableIRQ( EXTI15_10_IRQn );
|
||||
CTS_InitStruct.Mode = GPIO_MODE_IT_RISING;
|
||||
CTS_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init( GPIOD, &CTS_InitStruct );
|
||||
log_info("enabled CTS irq");
|
||||
}
|
||||
else {
|
||||
CTS_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
CTS_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init( GPIOD, &CTS_InitStruct );
|
||||
HAL_NVIC_DisableIRQ( EXTI15_10_IRQn );
|
||||
log_info("disabled CTS irq");
|
||||
}
|
||||
cts_irq_handler = the_irq_handler;
|
||||
}
|
||||
|
||||
int hal_uart_dma_set_baud(uint32_t baud){
|
||||
huart3.Init.BaudRate = baud;
|
||||
HAL_UART_Init(&huart3);
|
||||
return 0;
|
||||
huart3.Init.BaudRate = baud;
|
||||
HAL_UART_Init(&huart3);
|
||||
return 0;
|
||||
}
|
||||
|
||||
void hal_uart_dma_send_block(const uint8_t *data, uint16_t size){
|
||||
@ -200,7 +200,7 @@ void hal_uart_dma_send_block(const uint8_t *data, uint16_t size){
|
||||
}
|
||||
|
||||
void hal_uart_dma_receive_block(uint8_t *data, uint16_t size){
|
||||
HAL_UART_Receive_DMA( &huart3, data, size );
|
||||
HAL_UART_Receive_DMA( &huart3, data, size );
|
||||
}
|
||||
|
||||
#ifndef ENABLE_SEGGER_RTT
|
||||
@ -219,60 +219,60 @@ void hal_uart_dma_receive_block(uint8_t *data, uint16_t size){
|
||||
int _write(int file, char *ptr, int len);
|
||||
int _write(int file, char *ptr, int len){
|
||||
#if 1
|
||||
uint8_t cr = '\r';
|
||||
int i;
|
||||
uint8_t cr = '\r';
|
||||
int i;
|
||||
|
||||
if (file == STDOUT_FILENO || file == STDERR_FILENO) {
|
||||
for (i = 0; i < len; i++) {
|
||||
if (ptr[i] == '\n') {
|
||||
HAL_UART_Transmit( &huart2, &cr, 1, HAL_MAX_DELAY );
|
||||
}
|
||||
HAL_UART_Transmit( &huart2, (uint8_t *) &ptr[i], 1, HAL_MAX_DELAY );
|
||||
}
|
||||
return i;
|
||||
}
|
||||
errno = EIO;
|
||||
return -1;
|
||||
if (file == STDOUT_FILENO || file == STDERR_FILENO) {
|
||||
for (i = 0; i < len; i++) {
|
||||
if (ptr[i] == '\n') {
|
||||
HAL_UART_Transmit( &huart2, &cr, 1, HAL_MAX_DELAY );
|
||||
}
|
||||
HAL_UART_Transmit( &huart2, (uint8_t *) &ptr[i], 1, HAL_MAX_DELAY );
|
||||
}
|
||||
return i;
|
||||
}
|
||||
errno = EIO;
|
||||
return -1;
|
||||
#else
|
||||
return len;
|
||||
return len;
|
||||
#endif
|
||||
}
|
||||
|
||||
int _read(int file, char * ptr, int len){
|
||||
UNUSED(file);
|
||||
UNUSED(ptr);
|
||||
UNUSED(len);
|
||||
return -1;
|
||||
UNUSED(file);
|
||||
UNUSED(ptr);
|
||||
UNUSED(len);
|
||||
return -1;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
int _close(int file){
|
||||
UNUSED(file);
|
||||
return -1;
|
||||
UNUSED(file);
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _isatty(int file){
|
||||
UNUSED(file);
|
||||
return -1;
|
||||
UNUSED(file);
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _lseek(int file){
|
||||
UNUSED(file);
|
||||
return -1;
|
||||
UNUSED(file);
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _fstat(int file){
|
||||
UNUSED(file);
|
||||
return -1;
|
||||
UNUSED(file);
|
||||
return -1;
|
||||
}
|
||||
|
||||
|
||||
// main.c
|
||||
static void packet_handler (uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size){
|
||||
UNUSED(size);
|
||||
UNUSED(channel);
|
||||
bd_addr_t local_addr;
|
||||
UNUSED(size);
|
||||
UNUSED(channel);
|
||||
bd_addr_t local_addr;
|
||||
if (packet_type != HCI_EVENT_PACKET) return;
|
||||
switch(hci_event_packet_get_type(packet)){
|
||||
case BTSTACK_EVENT_STATE:
|
||||
@ -328,22 +328,22 @@ void port_main(void){
|
||||
// hci_dump_init(hci_dump_embedded_stdout_get_instance());
|
||||
#endif
|
||||
|
||||
// init HCI
|
||||
// init HCI
|
||||
hci_init(hci_transport_h4_instance(btstack_uart_block_embedded_instance()), (void*) &config);
|
||||
hci_set_chipset(btstack_chipset_cc256x_instance());
|
||||
|
||||
// setup TLV Flash Sector implementation
|
||||
const hal_flash_bank_t * hal_flash_bank_impl = hal_flash_bank_stm32_init_instance(
|
||||
&hal_flash_bank_context,
|
||||
HAL_FLASH_BANK_SIZE,
|
||||
HAL_FLASH_BANK_0_SECTOR,
|
||||
HAL_FLASH_BANK_1_SECTOR,
|
||||
HAL_FLASH_BANK_0_ADDR,
|
||||
HAL_FLASH_BANK_1_ADDR);
|
||||
&hal_flash_bank_context,
|
||||
HAL_FLASH_BANK_SIZE,
|
||||
HAL_FLASH_BANK_0_SECTOR,
|
||||
HAL_FLASH_BANK_1_SECTOR,
|
||||
HAL_FLASH_BANK_0_ADDR,
|
||||
HAL_FLASH_BANK_1_ADDR);
|
||||
const btstack_tlv_t * btstack_tlv_impl = btstack_tlv_flash_bank_init_instance(
|
||||
&btstack_tlv_flash_bank_context,
|
||||
hal_flash_bank_impl,
|
||||
&hal_flash_bank_context);
|
||||
&btstack_tlv_flash_bank_context,
|
||||
hal_flash_bank_impl,
|
||||
&hal_flash_bank_context);
|
||||
|
||||
// setup global tlv
|
||||
btstack_tlv_set_instance(btstack_tlv_impl, &btstack_tlv_flash_bank_context);
|
||||
@ -357,7 +357,7 @@ void port_main(void){
|
||||
|
||||
#ifdef HAVE_HAL_AUDIO
|
||||
// setup audio
|
||||
btstack_audio_sink_set_instance(btstack_audio_embedded_sink_get_instance());
|
||||
btstack_audio_sink_set_instance(btstack_audio_embedded_sink_get_instance());
|
||||
btstack_audio_source_set_instance(btstack_audio_embedded_source_get_instance());
|
||||
#endif
|
||||
|
||||
@ -365,7 +365,7 @@ void port_main(void){
|
||||
hci_event_callback_registration.callback = &packet_handler;
|
||||
hci_add_event_handler(&hci_event_callback_registration);
|
||||
|
||||
// hand over to btstack embedded code
|
||||
// hand over to btstack embedded code
|
||||
btstack_main(0, NULL);
|
||||
|
||||
// go
|
||||
@ -380,18 +380,18 @@ void port_main(void){
|
||||
void prvGetRegistersFromStack( uint32_t *pulFaultStackAddress );
|
||||
void prvGetRegistersFromStack( uint32_t *pulFaultStackAddress ) {
|
||||
|
||||
/* These are volatile to try and prevent the compiler/linker optimising them
|
||||
away as the variables never actually get used. If the debugger won't show the
|
||||
values of the variables, make them global my moving their declaration outside
|
||||
of this function. */
|
||||
volatile uint32_t r0;
|
||||
volatile uint32_t r1;
|
||||
volatile uint32_t r2;
|
||||
volatile uint32_t r3;
|
||||
volatile uint32_t r12;
|
||||
volatile uint32_t lr; /* Link register. */
|
||||
volatile uint32_t pc; /* Program counter. */
|
||||
volatile uint32_t psr;/* Program status register. */
|
||||
/* These are volatile to try and prevent the compiler/linker optimising them
|
||||
away as the variables never actually get used. If the debugger won't show the
|
||||
values of the variables, make them global my moving their declaration outside
|
||||
of this function. */
|
||||
volatile uint32_t r0;
|
||||
volatile uint32_t r1;
|
||||
volatile uint32_t r2;
|
||||
volatile uint32_t r3;
|
||||
volatile uint32_t r12;
|
||||
volatile uint32_t lr; /* Link register. */
|
||||
volatile uint32_t pc; /* Program counter. */
|
||||
volatile uint32_t psr;/* Program status register. */
|
||||
|
||||
r0 = pulFaultStackAddress[ 0 ];
|
||||
r1 = pulFaultStackAddress[ 1 ];
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user