From 6e78c2056a718d7f817b7cd373f33a85b366046a Mon Sep 17 00:00:00 2001 From: Matthias Ringwald <matthias@ringwald.ch> Date: Sun, 25 Jun 2017 10:46:06 +0200 Subject: [PATCH] stm32-l053r8-em9304: use PC0=A5 as debug output #0 --- .../cubemx-l053r8-em9304/Inc/main.h | 2 ++ .../cubemx-l053r8-em9304/Makefile | 2 +- .../cubemx-l053r8-em9304/Src/main.c | 10 +++++++ .../cubemx-l053r8-em9304.ioc | 29 +++++++++++-------- 4 files changed, 30 insertions(+), 13 deletions(-) diff --git a/port/stm32-l053r8-em9304/cubemx-l053r8-em9304/Inc/main.h b/port/stm32-l053r8-em9304/cubemx-l053r8-em9304/Inc/main.h index e129ff454..29b0e9196 100644 --- a/port/stm32-l053r8-em9304/cubemx-l053r8-em9304/Inc/main.h +++ b/port/stm32-l053r8-em9304/cubemx-l053r8-em9304/Inc/main.h @@ -48,6 +48,8 @@ #define B1_Pin GPIO_PIN_13 #define B1_GPIO_Port GPIOC +#define DEBUG_0_Pin GPIO_PIN_0 +#define DEBUG_0_GPIO_Port GPIOC #define USART_TX_Pin GPIO_PIN_2 #define USART_TX_GPIO_Port GPIOA #define USART_RX_Pin GPIO_PIN_3 diff --git a/port/stm32-l053r8-em9304/cubemx-l053r8-em9304/Makefile b/port/stm32-l053r8-em9304/cubemx-l053r8-em9304/Makefile index 287b50e03..0304834c8 100644 --- a/port/stm32-l053r8-em9304/cubemx-l053r8-em9304/Makefile +++ b/port/stm32-l053r8-em9304/cubemx-l053r8-em9304/Makefile @@ -1,5 +1,5 @@ ########################################################################################################################## -# File automatically-generated by tool: [projectgenerator] version: [2.23.0] date: [Sat Jun 24 23:09:09 CEST 2017] +# File automatically-generated by tool: [projectgenerator] version: [2.23.0] date: [Sun Jun 25 10:44:49 CEST 2017] ########################################################################################################################## # ------------------------------------------------ diff --git a/port/stm32-l053r8-em9304/cubemx-l053r8-em9304/Src/main.c b/port/stm32-l053r8-em9304/cubemx-l053r8-em9304/Src/main.c index 0a039085b..00ddc332c 100644 --- a/port/stm32-l053r8-em9304/cubemx-l053r8-em9304/Src/main.c +++ b/port/stm32-l053r8-em9304/cubemx-l053r8-em9304/Src/main.c @@ -252,6 +252,9 @@ static void MX_GPIO_Init(void) __HAL_RCC_GPIOA_CLK_ENABLE(); __HAL_RCC_GPIOB_CLK_ENABLE(); + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(DEBUG_0_GPIO_Port, DEBUG_0_Pin, GPIO_PIN_RESET); + /*Configure GPIO pin Output Level */ HAL_GPIO_WritePin(EN_GPIO_Port, EN_Pin, GPIO_PIN_RESET); @@ -264,6 +267,13 @@ static void MX_GPIO_Init(void) GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(B1_GPIO_Port, &GPIO_InitStruct); + /*Configure GPIO pin : DEBUG_0_Pin */ + GPIO_InitStruct.Pin = DEBUG_0_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(DEBUG_0_GPIO_Port, &GPIO_InitStruct); + /*Configure GPIO pins : EN_Pin SPI1_CSN_Pin */ GPIO_InitStruct.Pin = EN_Pin|SPI1_CSN_Pin; GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; diff --git a/port/stm32-l053r8-em9304/cubemx-l053r8-em9304/cubemx-l053r8-em9304.ioc b/port/stm32-l053r8-em9304/cubemx-l053r8-em9304/cubemx-l053r8-em9304.ioc index 87218b312..3491e02f7 100644 --- a/port/stm32-l053r8-em9304/cubemx-l053r8-em9304/cubemx-l053r8-em9304.ioc +++ b/port/stm32-l053r8-em9304/cubemx-l053r8-em9304/cubemx-l053r8-em9304.ioc @@ -34,21 +34,22 @@ Mcu.Name=STM32L053R(6-8)Tx Mcu.Package=LQFP64 Mcu.Pin0=PC13 Mcu.Pin1=PC14-OSC32_IN -Mcu.Pin10=PB10 -Mcu.Pin11=PA9 -Mcu.Pin12=PA13 -Mcu.Pin13=PA14 -Mcu.Pin14=PB6 -Mcu.Pin15=VP_SYS_VS_Systick +Mcu.Pin10=PA7 +Mcu.Pin11=PB10 +Mcu.Pin12=PA9 +Mcu.Pin13=PA13 +Mcu.Pin14=PA14 +Mcu.Pin15=PB6 +Mcu.Pin16=VP_SYS_VS_Systick Mcu.Pin2=PC15-OSC32_OUT Mcu.Pin3=PH0-OSC_IN Mcu.Pin4=PH1-OSC_OUT -Mcu.Pin5=PA2 -Mcu.Pin6=PA3 -Mcu.Pin7=PA5 -Mcu.Pin8=PA6 -Mcu.Pin9=PA7 -Mcu.PinsNb=16 +Mcu.Pin5=PC0 +Mcu.Pin6=PA2 +Mcu.Pin7=PA3 +Mcu.Pin8=PA5 +Mcu.Pin9=PA6 +Mcu.PinsNb=17 Mcu.UserConstants= Mcu.UserName=STM32L053R8Tx MxCube.Version=4.21.0 @@ -99,6 +100,10 @@ PB6.GPIO_Label=SPI1_CSN PB6.Locked=true PB6.PinState=GPIO_PIN_SET PB6.Signal=GPIO_Output +PC0.GPIOParameters=GPIO_Label +PC0.GPIO_Label=DEBUG_0 +PC0.Locked=true +PC0.Signal=GPIO_Output PC13.GPIOParameters=GPIO_Label,GPIO_ModeDefaultEXTI PC13.GPIO_Label=B1 [Blue PushButton] PC13.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_FALLING