chipset: add PSoC 4 with BLE DTM firmware

This commit is contained in:
Matthias Ringwald 2019-05-28 21:20:55 +02:00
parent 26687d1449
commit 624eaff032
2 changed files with 6 additions and 2 deletions

View File

@ -82,6 +82,7 @@ Broadcom USB Dongles | Dual mode | USB | Yes |
CSR UART | Dual mode | H4, H5, BCSP | No (didn't work) | csr |
CSR USB Dongles | Dual mode | USB | Yes | csr |
Cypress CYW20704 | Dual mode | H4, H5, USB | Probably | bcm |
Cypress PSoC 4 | LE | H4 | n.a. | | HCI Firmware part of PSoC Creator kit examples
Dialog Semiconductor DA14581, DA14585 | LE | H4, SPI | n.a. | da14581 | Official HCI firmware used
Espressif ESP32 | Dual mode | VHCI | Not yet | | SoC with Bluetooth and Wifi
EM 9301, 9304 | LE | SPI | n.a. | em9301 | Custom HCI SPI implementation

View File

@ -58,7 +58,8 @@ Broadcom UART | Dual mode | H4, H5 | Rarely | Partially (2)
Broadcom USB Dongles | Dual mode | USB | Yes | Yes | No | No | bcm |
CSR UART | Dual mode | H4, H5, BCSP | Rarely | Partially (2) | No | No | csr |
CSR USB Dongles | Dual mode | USB | Mostly | Yes | No | No | csr |
Cypress CYW20704 | Dual mode | H4, H5, USB | Don't know | Partially (2) | Yes | Yes | bcm |
Cypress CYW20704/7 | Dual mode | H4, H5, USB | Don't know | Partially (2) | Yes | Yes | bcm |
Cypress PSoC 4 | LE | H4 | Don't know | n.a. | Yes | Don't know | | HCI Firmware part of PSoC Creator kits examples
Dialog DA14581 | LE | H4, SPI | No | n.a. | No | No | da14581 | Official HCI firmware included in BTstack
Dialog DA14585 | LE | H4, SPI | No | n.a. | Yes | Yes | da14581 | Official HCI firmware included in BTstack
Dialog DA1469x | LE | H4, SPI | No | n.a. | Yes | Yes | da14581 | HCI Firmware part of DA1469x SDK
@ -67,7 +68,7 @@ EM 9301 | LE | SPI, H4 | No | n.a.
EM 9304 | LE | SPI, H4 | Yes | n.a. | Yes | Yes | em9301 | Custom HCI SPI implementation
Intel Dual Wireless 8260, 8265 | Dual mode | USB | Yes | Probably | Don't know | Don't know | intel | Firmware size: 400 kB
Nordic nRF | LE | H4 | Fixed Random | n.a. | Yes | Yes | | Requires HCI firmware
STM STLC2500D | Classic | H4 | No | No (didn't try) | n.a | n.a. | stlc2500d | Custom deep sleep management not supported
STM STLC2500D | Classic | H4 | No | Don't know | n.a | n.a. | stlc2500d | Custom deep sleep management not supported
Toshiba TC35661 | Dual mode | H4 | No | No | No | No | tc3566 | Only -007/009 models provide full HCI. See below
TI CC256x, WL183x | Dual mode | H4, H5, eHCILL | Yes | Yes | No | Yes for CC256XC | cc256x | Also WL185x, WL187x, and WL189x
@ -103,6 +104,8 @@ The best source for documentation on vendor specific commands so far has been th
Broadcom USB dongles do not require special configuration, however SCO data is not routed over USB by default.
The PSoC 4 SoCs can be programmed with the "BLE DTM" HCI Firmware from the PSoC Creator Kit Examples. The UART baudrate is set to 115200. For higher baud rates, the clocks probably need to be configured differently, as the IDE gives a warning about this.
**Init scripts**: For UART connected chipsets, an init script has to be uploaded after power on. For Bluetooth chipsets that are used in Broadcom Wifi+Bluetooth combos, this file often can be found as a binary file in Linux distributions with the ending *'.hcd'* or as part of the WICED SDK as C source file that contains the init script as a data array for use without a file system.
To find the correct file, Broadcom chipsets return their model number when asked for their local name.