started autoconf-based build system - not workint yet

aclocal.m4

@@ -0,0 +1,169 @@
+# generated automatically by aclocal 1.10.2 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
+# 
+# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# PKG_PROG_PKG_CONFIG([MIN-VERSION])
+# ----------------------------------
+AC_DEFUN([PKG_PROG_PKG_CONFIG],
+[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
+m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
+fi
+if test -n "$PKG_CONFIG"; then
+	_pkg_min_version=m4_default([$1], [0.9.0])
+	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
+	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+		AC_MSG_RESULT([yes])
+	else
+		AC_MSG_RESULT([no])
+		PKG_CONFIG=""
+	fi
+		
+fi[]dnl
+])# PKG_PROG_PKG_CONFIG
+
+# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+#
+# Check to see whether a particular set of modules exists.  Similar
+# to PKG_CHECK_MODULES(), but does not set variables or print errors.
+#
+#
+# Similar to PKG_CHECK_MODULES, make sure that the first instance of
+# this or PKG_CHECK_MODULES is called, or make sure to call
+# PKG_CHECK_EXISTS manually
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_EXISTS],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+if test -n "$PKG_CONFIG" && \
+    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
+  m4_ifval([$2], [$2], [:])
+m4_ifvaln([$3], [else
+  $3])dnl
+fi])
+
+
+# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+# ---------------------------------------------
+m4_define([_PKG_CONFIG],
+[if test -n "$$1"; then
+    pkg_cv_[]$1="$$1"
+ elif test -n "$PKG_CONFIG"; then
+    PKG_CHECK_EXISTS([$3],
+                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
+		     [pkg_failed=yes])
+ else
+    pkg_failed=untried
+fi[]dnl
+])# _PKG_CONFIG
+
+# _PKG_SHORT_ERRORS_SUPPORTED
+# -----------------------------
+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi[]dnl
+])# _PKG_SHORT_ERRORS_SUPPORTED
+
+
+# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+# [ACTION-IF-NOT-FOUND])
+#
+#
+# Note that if there is a possibility the first call to
+# PKG_CHECK_MODULES might not happen, you should be sure to include an
+# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
+#
+#
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_MODULES],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
+AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
+
+pkg_failed=no
+AC_MSG_CHECKING([for $1])
+
+_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
+_PKG_CONFIG([$1][_LIBS], [libs], [$2])
+
+m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
+and $1[]_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.])
+
+if test $pkg_failed = yes; then
+        _PKG_SHORT_ERRORS_SUPPORTED
+        if test $_pkg_short_errors_supported = yes; then
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
+        else 
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+
+	ifelse([$4], , [AC_MSG_ERROR(dnl
+[Package requirements ($2) were not met:
+
+$$1_PKG_ERRORS
+
+Consider adjusting the PKG_CONFIG_PATH environment variable if you
+installed software in a non-standard prefix.
+
+_PKG_TEXT
+])],
+		[AC_MSG_RESULT([no])
+                $4])
+elif test $pkg_failed = untried; then
+	ifelse([$4], , [AC_MSG_FAILURE(dnl
+[The pkg-config script could not be found or is too old.  Make sure it
+is in your PATH or set the PKG_CONFIG environment variable to the full
+path to pkg-config.
+
+_PKG_TEXT
+
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])],
+		[$4])
+else
+	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+        AC_MSG_RESULT([yes])
+	ifelse([$3], , :, [$3])
+fi[]dnl
+])# PKG_CHECK_MODULES
+

bootstrap.sh

@@ -0,0 +1,3 @@
+#!/bin/sh
+aclocal
+autoconf

config.guess

@@ -0,0 +1 @@
+/sw/share/automake-1.10/config.guess

config.sub

@@ -0,0 +1 @@
+/sw/share/automake-1.10/config.sub

configure.in

@@ -0,0 +1,73 @@
+#                                               -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.60)
+AC_INIT(btstack, 0.1.0, matthias.ringwald@gmail.com)
+
+AC_ARG_WITH(vendor-id, [AS_HELP_STRING([--with-vendor-id=vendorID], [Specify USB BT Dongle vendorID])], USB_VENDOR_ID=$withval, USB_VENDOR_ID="")  
+AC_ARG_WITH(product-id, [AS_HELP_STRING([--with-product-id=productID], [Specify USB BT Dongle productID])], USB_PRODUCT_ID=$withval, USB_PRODUCT_ID="")  
+AC_ARG_WITH(uart-device, [AS_HELP_STRING([--with-uart-device=uartDevice], [Specify BT UART device to use])], UART_DEVICE=$withval, UART_DEVICE="/dev/ttyS0")  
+AC_ARG_WITH(uart-speed, [AS_HELP_STRING([--with-uart-speed=uartSpeed], [Specify BT UART speed to use])], UART_SPEED=$withval, UART_SPEED="115200")  
+AC_ARG_WITH(hci-transport, [AS_HELP_STRING([--with-hci-transport=transportType], [Specify BT type to use: h4, usb])], HCI_TRANSPORT=$withval, HCI_TRANSPORT="h4")  
+
+# BUILD/HOST/TARGET
+AC_CANONICAL_HOST
+
+# Checks for programs.
+AC_PROG_CC
+AC_PROG_CPP
+AC_PROG_INSTALL
+AC_PROG_LN_S
+AC_PROG_MAKE_SET
+PKG_PROG_PKG_CONFIG
+
+
+# libdvdread used to get info on audio and subtitle languages
+PKG_CHECK_MODULES([LIBUSB], [libusb-1.0], HAVE_LIBUSB="yes", HAVE_LIBUSB="no")
+
+# AC_CONFIG_FILES([Makefile])
+
+# check USB specs
+if test "x$HCI_TRANSPORT" = xusb; then
+    if test -z "$USB_VENDOR_ID" ; then 
+        AC_MSG_ERROR(USB Transport requested but USB_VENDOR_ID not set. Please specify vendor ID of your USB dongle using --with-vendor-id=0x1234)
+    fi
+    if test -z "$USB_PRODUCT_ID" ; then 
+        AC_MSG_ERROR(USB Transport requested but USB_PRODUCT_ID not set. Please specify product ID of your USB dongle using --with-product-id=0x1234)
+    fi
+    if test "$HAVE_LIBUSB" == "no" ; then 
+        AC_MSG_ERROR(USB Transport requested but libusb-1.0 not found using pkg-config. Please set PKG_CONFIG_PATH correctly and/or install libusb-1.0 from your distribution or from http://libusb.sourceforge.net/api-1.0/)
+    fi
+fi
+
+# summary
+echo
+echo "BTstack configuration for $HCI_TRANSPORT"
+if test "x$HCI_TRANSPORT" = xusb; then
+    echo "USB_PRODUCT_ID=$USB_PRODUCT_ID"
+    echo "USB_VENDOR_ID=$USB_VENDOR_ID"
+    echo "LIBUSB_FLAGS=$LIBUSB_FLAGS"
+    echo "LIBUSB_LIBS=$LIBUSB_LIBS"
+else
+    echo "UART_DEVICE=$UART_DEVICE"
+    echo "UART_SPEED=$UART_SPEED"
+fi
+echo
+
+# create config.h
+echo "// config.h created by configure for BTstack " `date`> config.h
+if test "x$HCI_TRANSPORT" = xusb; then
+    echo "#define HAVE_TRANSPORT_USB" >> config.h
+    echo "#define USB_PRODUCT_ID=$USB_PRODUCT_ID" >> config.h
+    echo "#define USB_VENDOR_ID=$USB_VENDOR_ID" >> config.h
+else
+    echo "#define HAVE_TRANSPORT_H4" >> config.h
+    echo "#define UART_DEVICE=$UART_DEVICE" >> config.h
+    echo "#define UART_SPEED=$UART_SPEED" >> config.h
+fi
+
+
+AC_SUBST(LIBTOOL)
+AC_SUBST(INSTALL_PROGRAM)
+AC_SUBST(HAVE_LIBUSB)
+AC_OUTPUT

install-sh

@@ -0,0 +1 @@
+/sw/share/automake-1.10/install-sh