mirror/btstack
1
0
Fork 0
mirror of https://github.com/bluekitchen/btstack.git synced 2025-02-22 15:40:16 +00:00
Code Issues Packages Projects Releases Wiki Activity
btstack/chipset/sx128x/SMTC_Drivers/sx1280-driver-c/sx1280.h

1671 lines
59 KiB
C
Raw Normal View History

port: new stm32-sx1280 port
2020-07-03 18:10:33 +02:00
/*
______ _
/ _____) _ | |
( (____ _____ ____ _| |_ _____ ____| |__
\____ \| ___ | (_ _) ___ |/ ___) _ \
_____) ) ____| | | || |_| ____( (___| | | |
(______/|_____)_|_|_| \__)_____)\____)_| |_|
(C)2016 Semtech
Description: Driver for SX1280 devices
License: Revised BSD License, see LICENSE.TXT file include in the project
Maintainer: Miguel Luis, Gregory Cristian and Matthieu Verdy
*/
#ifndef __SX1280_H__
#define __SX1280_H__
#include <stdint.h>
#include <stdbool.h>
#include <math.h>
/*!
* \brief Enables/disables driver debug features
*/
#define SX1280_DEBUG 0
/*!
* \brief Hardware IO IRQ callback function definition
*/
typedef void ( DioIrqHandler )( void );
/*!
* \brief Provides the frequency of the chip running on the radio and the frequency step
*
* \remark These defines are used for computing the frequency divider to set the RF frequency
*/
#define XTAL_FREQ 52000000
#define FREQ_STEP ( ( double )( XTAL_FREQ / pow( 2.0, 18.0 ) ) )
/*!
* \brief Compensation delay for SetAutoTx/Rx functions in microseconds
*/
#define AUTO_RX_TX_OFFSET 33
/*!
* \brief The address of the register holding the firmware version MSB
*/
#define REG_LR_FIRMWARE_VERSION_MSB 0x0153
/*!
* \brief The address of the register holding the first byte defining the CRC seed
*
* \remark Only used for packet types GFSK and Flrc
*/
#define REG_LR_CRCSEEDBASEADDR 0x09C8
/*!
* \brief The address of the register holding the first byte defining the CRC polynomial
*
* \remark Only used for packet types GFSK and Flrc
*/
#define REG_LR_CRCPOLYBASEADDR 0x09C6
/*!
* \brief The address of the register holding the first byte defining the whitening seed
*
* \remark Only used for packet types GFSK, FLRC and BLE
*/
#define REG_LR_WHITSEEDBASEADDR 0x09C5
/*!
* \brief The address of the register holding the ranging id check length
*
* \remark Only used for packet type Ranging
*/
#define REG_LR_RANGINGIDCHECKLENGTH 0x0931
/*!
* \brief The address of the register holding the device ranging id
*
* \remark Only used for packet type Ranging
*/
#define REG_LR_DEVICERANGINGADDR 0x0916
/*!
* \brief The address of the register holding the device ranging id
*
* \remark Only used for packet type Ranging
*/
#define REG_LR_REQUESTRANGINGADDR 0x0912
/*!
* \brief The address of the register holding ranging results configuration
* and the corresponding mask
*
* \remark Only used for packet type Ranging
*/
#define REG_LR_RANGINGRESULTCONFIG 0x0924
#define MASK_RANGINGMUXSEL 0xCF
/*!
* \brief The address of the register holding the first byte of ranging results
* Only used for packet type Ranging
*/
#define REG_LR_RANGINGRESULTBASEADDR 0x0961
/*!
* \brief The address of the register allowing to read ranging results
*
* \remark Only used for packet type Ranging
*/
#define REG_LR_RANGINGRESULTSFREEZE 0x097F
/*!
* \brief The address of the register holding the first byte of ranging calibration
*
* \remark Only used for packet type Ranging
*/
#define REG_LR_RANGINGRERXTXDELAYCAL 0x092C
/*!
*\brief The address of the register holding the ranging filter window size
*
* \remark Only used for packet type Ranging
*/
#define REG_LR_RANGINGFILTERWINDOWSIZE 0x091E
/*!
*\brief The address of the register to reset for clearing ranging filter
*
* \remark Only used for packet type Ranging
*/
#define REG_LR_RANGINGRESULTCLEARREG 0x0923
#define REG_RANGING_RSSI 0x0964
/*!
* \brief The default number of samples considered in built-in ranging filter
*/
#define DEFAULT_RANGING_FILTER_SIZE 127
/*!
* \brief The address of the register holding LORA packet parameters
*/
#define REG_LR_PACKETPARAMS 0x903
/*!
* \brief The address of the register holding payload length
*
* \remark Do NOT try to read it directly. Use GetRxBuffer( ) instead.
*/
#define REG_LR_PAYLOADLENGTH 0x901
/*!
* \brief The address of the instruction RAM and its size
*/
#define IRAM_START_ADDRESS 0x8000
#define IRAM_SIZE 0x4000
/*!
* \brief The addresses of the registers holding SyncWords values
*
* \remark The addresses depends on the Packet Type in use, and not all
* SyncWords are available for every Packet Type
*/
#define REG_LR_SYNCWORDBASEADDRESS1 0x09CE
#define REG_LR_SYNCWORDBASEADDRESS2 0x09D3
#define REG_LR_SYNCWORDBASEADDRESS3 0x09D8
/*!
* \brief The MSB address and mask used to read the estimated frequency
* error
*/
#define REG_LR_ESTIMATED_FREQUENCY_ERROR_MSB 0x0954
#define REG_LR_ESTIMATED_FREQUENCY_ERROR_MASK 0x0FFFFF
/*!
* \brief Defines how many bit errors are tolerated in sync word detection
*/
#define REG_LR_SYNCWORDTOLERANCE 0x09CD
/*!
* \brief Register for MSB Access Address (BLE)
*/
#define REG_LR_BLE_ACCESS_ADDRESS 0x09CF
#define BLE_ADVERTIZER_ACCESS_ADDRESS 0x8E89BED6
/*!
* \brief Register address and mask for LNA regime selection
*/
#define REG_LNA_REGIME 0x0891
#define MASK_LNA_REGIME 0xC0
/*!
* \brief Register and mask enabling manual gain control
*/
#define REG_ENABLE_MANUAL_GAIN_CONTROL 0x089F
#define MASK_MANUAL_GAIN_CONTROL 0x80
/*!
* \brief Register and mask controlling demodulation detection
*/
#define REG_DEMOD_DETECTION 0x0895
#define MASK_DEMOD_DETECTION 0xFE
/*!
* \brief Register and mask setting manual gain value
*/
#define REG_MANUAL_GAIN_VALUE 0x089E
#define MASK_MANUAL_GAIN_VALUE 0xF0
/*!
* \brief Selector values to configure LNA regime
*/
typedef enum{
LNA_LOW_POWER_MODE, //!< Allow maximum efficiency of sx1280 (default)
LNA_HIGH_SENSITIVITY_MODE, //!< Allow to use highest three steps of LNA gain and increase current consumption
}RadioLnaSettings_t;
/*!
* \brief Structure describing the radio status
*/
typedef union
{
/*!
* \brief Structure of the radio status
*/
struct
{
uint8_t CpuBusy : 1; //!< Flag for CPU radio busy
uint8_t DmaBusy : 1; //!< Flag for DMA busy
uint8_t CmdStatus : 3; //!< Command status
uint8_t ChipMode : 3; //!< Chip mode
}Fields;
/*!
* \brief Serialized radio status
*/
uint8_t Value;
}RadioStatus_t;
/*!
* \brief Represents the states of the radio
*/
typedef enum
{
RF_IDLE = 0x00, //!< The radio is idle
RF_RX_RUNNING, //!< The radio is in reception state
RF_TX_RUNNING, //!< The radio is in transmission state
RF_CAD, //!< The radio is doing channel activity detection
}RadioStates_t;
/*!
* \brief Represents the operating mode the radio is actually running
*/
typedef enum
{
MODE_SLEEP = 0x00, //! The radio is in sleep mode
MODE_STDBY_RC, //! The radio is in standby mode with RC oscillator
MODE_STDBY_XOSC, //! The radio is in standby mode with XOSC oscillator
MODE_FS, //! The radio is in frequency synthesis mode
MODE_TX, //! The radio is in transmit mode
MODE_RX, //! The radio is in receive mode
MODE_CAD //! The radio is in channel activity detection mode
}RadioOperatingModes_t;
/*!
* \brief Declares the oscillator in use while in standby mode
*
* Using the STDBY_RC standby mode allow to reduce the energy consumption
* STDBY_XOSC should be used for time critical applications
*/
typedef enum
{
STDBY_RC = 0x00,
STDBY_XOSC = 0x01,
}RadioStandbyModes_t;
/*!
* \brief Declares the power regulation used to power the device
*
* This command allows the user to specify if DC-DC or LDO is used for power regulation.
* Using only LDO implies that the Rx or Tx current is doubled
*/
typedef enum
{
USE_LDO = 0x00, //! Use LDO (default value)
USE_DCDC = 0x01, //! Use DCDC
}RadioRegulatorModes_t;
/*!
* \brief Represents the possible packet type (i.e. modem) used
*/
typedef enum
{
PACKET_TYPE_GFSK = 0x00,
PACKET_TYPE_LORA,
PACKET_TYPE_RANGING,
PACKET_TYPE_FLRC,
PACKET_TYPE_BLE,
PACKET_TYPE_NONE = 0x0F,
}RadioPacketTypes_t;
/*!
* \brief Represents the ramping time for power amplifier
*/
typedef enum
{
RADIO_RAMP_02_US = 0x00,
RADIO_RAMP_04_US = 0x20,
RADIO_RAMP_06_US = 0x40,
RADIO_RAMP_08_US = 0x60,
RADIO_RAMP_10_US = 0x80,
RADIO_RAMP_12_US = 0xA0,
RADIO_RAMP_16_US = 0xC0,
RADIO_RAMP_20_US = 0xE0,
}RadioRampTimes_t;
/*!
* \brief Represents the number of symbols to be used for channel activity detection operation
*/
typedef enum
{
LORA_CAD_01_SYMBOL = 0x00,
LORA_CAD_02_SYMBOL = 0x20,
LORA_CAD_04_SYMBOL = 0x40,
LORA_CAD_08_SYMBOL = 0x60,
LORA_CAD_16_SYMBOL = 0x80,
}RadioLoRaCadSymbols_t;
/*!
* \brief Represents the possible combinations of bitrate and bandwidth for
* GFSK and BLE packet types
*
* The bitrate is expressed in Mb/s and the bandwidth in MHz
*/
typedef enum
{
GFSK_BLE_BR_2_000_BW_2_4 = 0x04,
GFSK_BLE_BR_1_600_BW_2_4 = 0x28,
GFSK_BLE_BR_1_000_BW_2_4 = 0x4C,
GFSK_BLE_BR_1_000_BW_1_2 = 0x45,
GFSK_BLE_BR_0_800_BW_2_4 = 0x70,
GFSK_BLE_BR_0_800_BW_1_2 = 0x69,
GFSK_BLE_BR_0_500_BW_1_2 = 0x8D,
GFSK_BLE_BR_0_500_BW_0_6 = 0x86,
GFSK_BLE_BR_0_400_BW_1_2 = 0xB1,
GFSK_BLE_BR_0_400_BW_0_6 = 0xAA,
GFSK_BLE_BR_0_250_BW_0_6 = 0xCE,
GFSK_BLE_BR_0_250_BW_0_3 = 0xC7,
GFSK_BLE_BR_0_125_BW_0_3 = 0xEF,
}RadioGfskBleBitrates_t;
/*!
* \brief Represents the modulation index used in GFSK and BLE packet
* types
*/
typedef enum
{
GFSK_BLE_MOD_IND_0_35 = 0,
GFSK_BLE_MOD_IND_0_50 = 1,
GFSK_BLE_MOD_IND_0_75 = 2,
GFSK_BLE_MOD_IND_1_00 = 3,
GFSK_BLE_MOD_IND_1_25 = 4,
GFSK_BLE_MOD_IND_1_50 = 5,
GFSK_BLE_MOD_IND_1_75 = 6,
GFSK_BLE_MOD_IND_2_00 = 7,
GFSK_BLE_MOD_IND_2_25 = 8,
GFSK_BLE_MOD_IND_2_50 = 9,
GFSK_BLE_MOD_IND_2_75 = 10,
GFSK_BLE_MOD_IND_3_00 = 11,
GFSK_BLE_MOD_IND_3_25 = 12,
GFSK_BLE_MOD_IND_3_50 = 13,
GFSK_BLE_MOD_IND_3_75 = 14,
GFSK_BLE_MOD_IND_4_00 = 15,
}RadioGfskBleModIndexes_t;
/*!
* \brief Represents the possible combination of bitrate and bandwidth for FLRC
* packet type
*
* The bitrate is in Mb/s and the bitrate in MHz
*/
typedef enum
{
FLRC_BR_2_600_BW_2_4 = 0x04,
FLRC_BR_2_080_BW_2_4 = 0x28,
FLRC_BR_1_300_BW_1_2 = 0x45,
FLRC_BR_1_040_BW_1_2 = 0x69,
FLRC_BR_0_650_BW_0_6 = 0x86,
FLRC_BR_0_520_BW_0_6 = 0xAA,
FLRC_BR_0_325_BW_0_3 = 0xC7,
FLRC_BR_0_260_BW_0_3 = 0xEB,
}RadioFlrcBitrates_t;
/*!
* \brief Represents the possible values for coding rate parameter in FLRC
* packet type
*/
typedef enum
{
FLRC_CR_1_2 = 0x00,
FLRC_CR_3_4 = 0x02,
FLRC_CR_1_0 = 0x04,
}RadioFlrcCodingRates_t;
/*!
* \brief Represents the modulation shaping parameter for GFSK, FLRC and BLE
* packet types
*/
typedef enum
{
RADIO_MOD_SHAPING_BT_OFF = 0x00, //! No filtering
RADIO_MOD_SHAPING_BT_1_0 = 0x10,
RADIO_MOD_SHAPING_BT_0_5 = 0x20,
}RadioModShapings_t;
/*!
* \brief Represents the possible spreading factor values in LORA packet types
*/
typedef enum
{
LORA_SF5 = 0x50,
LORA_SF6 = 0x60,
LORA_SF7 = 0x70,
LORA_SF8 = 0x80,
LORA_SF9 = 0x90,
LORA_SF10 = 0xA0,
LORA_SF11 = 0xB0,
LORA_SF12 = 0xC0,
}RadioLoRaSpreadingFactors_t;
/*!
* \brief Represents the bandwidth values for LORA packet type
*/
typedef enum
{
LORA_BW_0200 = 0x34,
LORA_BW_0400 = 0x26,
LORA_BW_0800 = 0x18,
LORA_BW_1600 = 0x0A,
}RadioLoRaBandwidths_t;
/*!
* \brief Represents the coding rate values for LORA packet type
*/
typedef enum
{
LORA_CR_4_5 = 0x01,
LORA_CR_4_6 = 0x02,
LORA_CR_4_7 = 0x03,
LORA_CR_4_8 = 0x04,
LORA_CR_LI_4_5 = 0x05,
LORA_CR_LI_4_6 = 0x06,
LORA_CR_LI_4_7 = 0x07,
}RadioLoRaCodingRates_t;
/*!
* \brief Represents the preamble length values for GFSK and FLRC packet
* types
*/
typedef enum
{
PREAMBLE_LENGTH_04_BITS = 0x00, //!< Preamble length: 04 bits
PREAMBLE_LENGTH_08_BITS = 0x10, //!< Preamble length: 08 bits
PREAMBLE_LENGTH_12_BITS = 0x20, //!< Preamble length: 12 bits
PREAMBLE_LENGTH_16_BITS = 0x30, //!< Preamble length: 16 bits
PREAMBLE_LENGTH_20_BITS = 0x40, //!< Preamble length: 20 bits
PREAMBLE_LENGTH_24_BITS = 0x50, //!< Preamble length: 24 bits
PREAMBLE_LENGTH_28_BITS = 0x60, //!< Preamble length: 28 bits
PREAMBLE_LENGTH_32_BITS = 0x70, //!< Preamble length: 32 bits
}RadioPreambleLengths_t;
/*!
* \brief Represents the SyncWord length for FLRC packet type
*/
typedef enum
{
FLRC_NO_SYNCWORD = 0x00,
FLRC_SYNCWORD_LENGTH_4_BYTE = 0x04,
}RadioFlrcSyncWordLengths_t;
/*!
* \brief The length of sync words for GFSK packet type
*/
typedef enum
{
GFSK_SYNCWORD_LENGTH_1_BYTE = 0x00, //!< Sync word length: 1 byte
GFSK_SYNCWORD_LENGTH_2_BYTE = 0x02, //!< Sync word length: 2 bytes
GFSK_SYNCWORD_LENGTH_3_BYTE = 0x04, //!< Sync word length: 3 bytes
GFSK_SYNCWORD_LENGTH_4_BYTE = 0x06, //!< Sync word length: 4 bytes
GFSK_SYNCWORD_LENGTH_5_BYTE = 0x08, //!< Sync word length: 5 bytes
}RadioSyncWordLengths_t;
/*!
* \brief Represents the possible combinations of SyncWord correlators
* activated for GFSK and FLRC packet types
*/
typedef enum
{
RADIO_RX_MATCH_SYNCWORD_OFF = 0x00, //!< No correlator turned on, i.e. do not search for SyncWord
RADIO_RX_MATCH_SYNCWORD_1 = 0x10,
RADIO_RX_MATCH_SYNCWORD_2 = 0x20,
RADIO_RX_MATCH_SYNCWORD_1_2 = 0x30,
RADIO_RX_MATCH_SYNCWORD_3 = 0x40,
RADIO_RX_MATCH_SYNCWORD_1_3 = 0x50,
RADIO_RX_MATCH_SYNCWORD_2_3 = 0x60,
RADIO_RX_MATCH_SYNCWORD_1_2_3 = 0x70,
}RadioSyncWordRxMatchs_t;
/*!
* \brief Radio packet length mode for GFSK and FLRC packet types
*/
typedef enum
{
RADIO_PACKET_FIXED_LENGTH = 0x00, //!< The packet is known on both sides, no header included in the packet
RADIO_PACKET_VARIABLE_LENGTH = 0x20, //!< The packet is on variable size, header included
}RadioPacketLengthModes_t;
/*!
* \brief Represents the CRC length for GFSK and FLRC packet types
*
* \warning Not all configurations are available for both GFSK and FLRC
* packet type. Refer to the datasheet for possible configuration.
*/
typedef enum
{
RADIO_CRC_OFF = 0x00, //!< No CRC in use
RADIO_CRC_1_BYTES = 0x10,
RADIO_CRC_2_BYTES = 0x20,
RADIO_CRC_3_BYTES = 0x30,
}RadioCrcTypes_t;
/*!
* \brief Radio whitening mode activated or deactivated for GFSK, FLRC and
* BLE packet types
*/
typedef enum
{
RADIO_WHITENING_ON = 0x00,
RADIO_WHITENING_OFF = 0x08,
}RadioWhiteningModes_t;
/*!
* \brief Holds the packet length mode of a LORA packet type
*/
typedef enum
{
LORA_PACKET_VARIABLE_LENGTH = 0x00, //!< The packet is on variable size, header included
LORA_PACKET_FIXED_LENGTH = 0x80, //!< The packet is known on both sides, no header included in the packet
LORA_PACKET_EXPLICIT = LORA_PACKET_VARIABLE_LENGTH,
LORA_PACKET_IMPLICIT = LORA_PACKET_FIXED_LENGTH,
}RadioLoRaPacketLengthsModes_t;
/*!
* \brief Represents the CRC mode for LORA packet type
*/
typedef enum
{
LORA_CRC_ON = 0x20, //!< CRC activated
LORA_CRC_OFF = 0x00, //!< CRC not used
}RadioLoRaCrcModes_t;
/*!
* \brief Represents the IQ mode for LORA packet type
*/
typedef enum
{
LORA_IQ_NORMAL = 0x40,
LORA_IQ_INVERTED = 0x00,
}RadioLoRaIQModes_t;
/*!
* \brief Represents the length of the ID to check in ranging operation
*/
typedef enum
{
RANGING_IDCHECK_LENGTH_08_BITS = 0x00,
RANGING_IDCHECK_LENGTH_16_BITS,
RANGING_IDCHECK_LENGTH_24_BITS,
RANGING_IDCHECK_LENGTH_32_BITS,
}RadioRangingIdCheckLengths_t;
/*!
* \brief Represents the result type to be used in ranging operation
*/
typedef enum
{
RANGING_RESULT_RAW = 0x00,
RANGING_RESULT_AVERAGED = 0x01,
RANGING_RESULT_DEBIASED = 0x02,
RANGING_RESULT_FILTERED = 0x03,
}RadioRangingResultTypes_t;
/*!
* \brief Represents the connection state for BLE packet type
*/
typedef enum
{
BLE_PAYLOAD_LENGTH_MAX_31_BYTES = 0x00,
BLE_PAYLOAD_LENGTH_MAX_37_BYTES = 0x20,
BLE_TX_TEST_MODE = 0x40,
BLE_PAYLOAD_LENGTH_MAX_255_BYTES = 0x80,
}RadioBleConnectionStates_t;
/*!
* \brief Represents the CRC field length for BLE packet type
*/
typedef enum
{
BLE_CRC_OFF = 0x00,
BLE_CRC_3B = 0x10,
}RadioBleCrcFields_t;
/*!
* \brief Represents the specific packets to use in BLE packet type
*/
typedef enum
{
BLE_PRBS_9 = 0x00, //!< Pseudo Random Binary Sequence based on 9th degree polynomial
BLE_PRBS_15 = 0x0C, //!< Pseudo Random Binary Sequence based on 15th degree polynomial
BLE_EYELONG_1_0 = 0x04, //!< Repeated '11110000' sequence
BLE_EYELONG_0_1 = 0x18, //!< Repeated '00001111' sequence
BLE_EYESHORT_1_0 = 0x08, //!< Repeated '10101010' sequence
BLE_EYESHORT_0_1 = 0x1C, //!< Repeated '01010101' sequence
BLE_ALL_1 = 0x10, //!< Repeated '11111111' sequence
BLE_ALL_0 = 0x14, //!< Repeated '00000000' sequence
}RadioBlePacketTypes_t;
/*!
* \brief Represents the interruption masks available for the radio
*
* \remark Note that not all these interruptions are available for all packet types
*/
typedef enum
{
IRQ_RADIO_NONE = 0x0000,
IRQ_TX_DONE = 0x0001,
IRQ_RX_DONE = 0x0002,
IRQ_SYNCWORD_VALID = 0x0004,
IRQ_SYNCWORD_ERROR = 0x0008,
IRQ_HEADER_VALID = 0x0010,
IRQ_HEADER_ERROR = 0x0020,
IRQ_CRC_ERROR = 0x0040,
IRQ_RANGING_SLAVE_RESPONSE_DONE = 0x0080,
IRQ_RANGING_SLAVE_REQUEST_DISCARDED = 0x0100,
IRQ_RANGING_MASTER_RESULT_VALID = 0x0200,
IRQ_RANGING_MASTER_RESULT_TIMEOUT = 0x0400,
IRQ_RANGING_SLAVE_REQUEST_VALID = 0x0800,
IRQ_CAD_DONE = 0x1000,
IRQ_CAD_ACTIVITY_DETECTED = 0x2000,
IRQ_RX_TX_TIMEOUT = 0x4000,
IRQ_PREAMBLE_DETECTED = 0x8000,
IRQ_RADIO_ALL = 0xFFFF,
}RadioIrqMasks_t;
/*!
* \brief Represents the digital input/output of the radio
*/
typedef enum
{
RADIO_DIO1 = 0x02,
RADIO_DIO2 = 0x04,
RADIO_DIO3 = 0x08,
}RadioDios_t;
/*!
* \brief Represents the tick size available for Rx/Tx timeout operations
*/
typedef enum
{
RADIO_TICK_SIZE_0015_US = 0x00,
RADIO_TICK_SIZE_0062_US = 0x01,
RADIO_TICK_SIZE_1000_US = 0x02,
RADIO_TICK_SIZE_4000_US = 0x03,
}RadioTickSizes_t;
/*!
* \brief Represents the role of the radio during ranging operations
*/
typedef enum
{
RADIO_RANGING_ROLE_SLAVE = 0x00,
RADIO_RANGING_ROLE_MASTER = 0x01,
}RadioRangingRoles_t;
/*!
* \brief Represents all possible opcode understood by the radio
*/
typedef enum RadioCommands_u
{
RADIO_GET_STATUS = 0xC0,
RADIO_WRITE_REGISTER = 0x18,
RADIO_READ_REGISTER = 0x19,
RADIO_WRITE_BUFFER = 0x1A,
RADIO_READ_BUFFER = 0x1B,
RADIO_SET_SLEEP = 0x84,
RADIO_SET_STANDBY = 0x80,
RADIO_SET_FS = 0xC1,
RADIO_SET_TX = 0x83,
RADIO_SET_RX = 0x82,
RADIO_SET_RXDUTYCYCLE = 0x94,
RADIO_SET_CAD = 0xC5,
RADIO_SET_TXCONTINUOUSWAVE = 0xD1,
RADIO_SET_TXCONTINUOUSPREAMBLE = 0xD2,
RADIO_SET_PACKETTYPE = 0x8A,
RADIO_GET_PACKETTYPE = 0x03,
RADIO_SET_RFFREQUENCY = 0x86,
RADIO_SET_TXPARAMS = 0x8E,
RADIO_SET_CADPARAMS = 0x88,
RADIO_SET_BUFFERBASEADDRESS = 0x8F,
RADIO_SET_MODULATIONPARAMS = 0x8B,
RADIO_SET_PACKETPARAMS = 0x8C,
RADIO_GET_RXBUFFERSTATUS = 0x17,
RADIO_GET_PACKETSTATUS = 0x1D,
RADIO_GET_RSSIINST = 0x1F,
RADIO_SET_DIOIRQPARAMS = 0x8D,
RADIO_GET_IRQSTATUS = 0x15,
RADIO_CLR_IRQSTATUS = 0x97,
RADIO_CALIBRATE = 0x89,
RADIO_SET_REGULATORMODE = 0x96,
RADIO_SET_SAVECONTEXT = 0xD5,
RADIO_SET_AUTOTX = 0x98,
RADIO_SET_AUTOFS = 0x9E,
RADIO_SET_LONGPREAMBLE = 0x9B,
RADIO_SET_UARTSPEED = 0x9D,
RADIO_SET_RANGING_ROLE = 0xA3,
}RadioCommands_t;
/*!
* \brief Represents an amount of time measurable by the radio clock
*
* @code
* Time = Step * NbSteps
* Example:
* Step = RADIO_TICK_SIZE_4000_US( 4 ms )
* NbSteps = 1000
* Time = 4e-3 * 1000 = 4 seconds
* @endcode
*/
typedef struct TickTime_s
{
RadioTickSizes_t Step; //!< The step of ticktime
/*!
* \brief The number of steps for ticktime
* Special values are:
* - 0x0000 for single mode
* - 0xFFFF for continuous mode
*/
uint16_t NbSteps;
}TickTime_t;
/*!
* \brief RX_TX_CONTINUOUS and RX_TX_SINGLE are two particular values for TickTime.
* The former keep the radio in Rx or Tx mode, even after successfull reception
* or transmission. It should never generate Timeout interrupt.
* The later let the radio enought time to make one reception or transmission.
* No Timeout interrupt is generated, and the radio fall in StandBy mode after
* reception or transmission.
*/
#define RX_TX_CONTINUOUS ( TickTime_t ){ RADIO_TICK_SIZE_0015_US, 0xFFFF }
#define RX_TX_SINGLE ( TickTime_t ){ RADIO_TICK_SIZE_0015_US, 0 }
/*!
* \brief The type describing the modulation parameters for every packet types
*/
typedef struct
{
RadioPacketTypes_t PacketType; //!< Packet to which the modulation parameters are referring to.
// union
struct
{
/*!
* \brief Holds the GFSK modulation parameters
*
* In GFSK modulation, the bit-rate and bandwidth are linked together. In this structure, its values are set using the same token.
*/
struct
{
RadioGfskBleBitrates_t BitrateBandwidth; //!< The bandwidth and bit-rate values for BLE and GFSK modulations
RadioGfskBleModIndexes_t ModulationIndex; //!< The coding rate for BLE and GFSK modulations
RadioModShapings_t ModulationShaping; //!< The modulation shaping for BLE and GFSK modulations
}Gfsk;
/*!
* \brief Holds the LORA modulation parameters
*
* LORA modulation is defined by Spreading Factor (SF), Bandwidth and Coding Rate
*/
struct
{
RadioLoRaSpreadingFactors_t SpreadingFactor; //!< Spreading Factor for the LORA modulation
RadioLoRaBandwidths_t Bandwidth; //!< Bandwidth for the LORA modulation
RadioLoRaCodingRates_t CodingRate; //!< Coding rate for the LORA modulation
}LoRa;
/*!
* \brief Holds the FLRC modulation parameters
*
* In FLRC modulation, the bit-rate and bandwidth are linked together. In this structure, its values are set using the same token.
*/
struct
{
RadioFlrcBitrates_t BitrateBandwidth; //!< The bandwidth and bit-rate values for FLRC modulation
RadioFlrcCodingRates_t CodingRate; //!< The coding rate for FLRC modulation
RadioModShapings_t ModulationShaping; //!< The modulation shaping for FLRC modulation
}Flrc;
/*!
* \brief Holds the BLE modulation parameters
*
* In BLE modulation, the bit-rate and bandwidth are linked together. In this structure, its values are set using the same token.
*/
struct
{
RadioGfskBleBitrates_t BitrateBandwidth; //!< The bandwidth and bit-rate values for BLE and GFSK modulations
RadioGfskBleModIndexes_t ModulationIndex; //!< The coding rate for BLE and GFSK modulations
RadioModShapings_t ModulationShaping; //!< The modulation shaping for BLE and GFSK modulations
}Ble;
}Params; //!< Holds the modulation parameters structure
}ModulationParams_t;
/*!
* \brief Structure describing the error codes for callback functions
*/
typedef enum
{
IRQ_HEADER_ERROR_CODE = 0x00,
IRQ_SYNCWORD_ERROR_CODE,
IRQ_CRC_ERROR_CODE,
IRQ_RANGING_ON_LORA_ERROR_CODE,
}IrqErrorCode_t;
/*!
* \brief Structure describing the ranging codes for callback functions
*/
typedef enum
{
IRQ_RANGING_SLAVE_ERROR_CODE = 0x00,
IRQ_RANGING_SLAVE_VALID_CODE,
IRQ_RANGING_MASTER_ERROR_CODE,
IRQ_RANGING_MASTER_VALID_CODE,
}IrqRangingCode_t;
/*!
* \brief The radio callbacks structure
* Holds function pointers to be called on radio interrupts
*/
typedef struct
{
void ( *txDone )( void ); //!< Pointer to a function run on successful transmission
void ( *rxDone )( void ); //!< Pointer to a function run on successful reception
void ( *rxSyncWordDone )( void ); //!< Pointer to a function run on successful SyncWord reception
void ( *rxHeaderDone )( void ); //!< Pointer to a function run on successful Header reception
void ( *txTimeout )( void ); //!< Pointer to a function run on transmission timeout
void ( *rxTimeout )( void ); //!< Pointer to a function run on reception timeout
void ( *rxError )( IrqErrorCode_t errCode ); //!< Pointer to a function run on reception error
void ( *rangingDone )( IrqRangingCode_t val ); //!< Pointer to a function run on ranging terminated
void ( *cadDone )( bool cadFlag ); //!< Pointer to a function run on channel activity detected
}RadioCallbacks_t;
/*!
* \brief The type describing the packet parameters for every packet types
*/
typedef struct
{
RadioPacketTypes_t PacketType; //!< Packet to which the packet parameters are referring to.
// union
struct
{
/*!
* \brief Holds the GFSK packet parameters
*/
struct
{
RadioPreambleLengths_t PreambleLength; //!< The preamble length for GFSK packet type
RadioSyncWordLengths_t SyncWordLength; //!< The synchronization word length for GFSK packet type
RadioSyncWordRxMatchs_t SyncWordMatch; //!< The synchronization correlator to use to check synchronization word
RadioPacketLengthModes_t HeaderType; //!< If the header is explicit, it will be transmitted in the GFSK packet. If the header is implicit, it will not be transmitted
uint8_t PayloadLength; //!< Size of the payload in the GFSK packet
RadioCrcTypes_t CrcLength; //!< Size of the CRC block in the GFSK packet
RadioWhiteningModes_t Whitening; //!< Usage of whitening on payload and CRC blocks plus header block if header type is variable
}Gfsk;
/*!
* \brief Holds the LORA packet parameters
*/
struct
{
uint8_t PreambleLength; //!< The preamble length is the number of LORA symbols in the preamble. To set it, use the following formula @code Number of symbols = PreambleLength[3:0] * ( 2^PreambleLength[7:4] ) @endcode
RadioLoRaPacketLengthsModes_t HeaderType; //!< If the header is explicit, it will be transmitted in the LORA packet. If the header is implicit, it will not be transmitted
uint8_t PayloadLength; //!< Size of the payload in the LORA packet
RadioLoRaCrcModes_t CrcMode; //!< Size of CRC block in LORA packet
RadioLoRaIQModes_t InvertIQ; //!< Allows to swap IQ for LORA packet
}LoRa;
/*!
* \brief Holds the FLRC packet parameters
*/
struct
{
RadioPreambleLengths_t PreambleLength; //!< The preamble length for FLRC packet type
RadioFlrcSyncWordLengths_t SyncWordLength; //!< The synchronization word length for FLRC packet type
RadioSyncWordRxMatchs_t SyncWordMatch; //!< The synchronization correlator to use to check synchronization word
RadioPacketLengthModes_t HeaderType; //!< If the header is explicit, it will be transmitted in the FLRC packet. If the header is implicit, it will not be transmitted.
uint8_t PayloadLength; //!< Size of the payload in the FLRC packet
RadioCrcTypes_t CrcLength; //!< Size of the CRC block in the FLRC packet
RadioWhiteningModes_t Whitening; //!< Usage of whitening on payload and CRC blocks plus header block if header type is variable
}Flrc;
/*!
* \brief Holds the BLE packet parameters
*/
struct
{
RadioBleConnectionStates_t ConnectionState; //!< The BLE state
RadioBleCrcFields_t CrcField; //!< Size of the CRC block in the BLE packet
RadioBlePacketTypes_t BlePacketType; //!< Special BLE packet types
RadioWhiteningModes_t Whitening; //!< Usage of whitening on PDU and CRC blocks of BLE packet
}Ble;
}Params; //!< Holds the packet parameters structure
}PacketParams_t;
/*!
* \brief Represents the packet status for every packet type
*/
typedef struct
{
RadioPacketTypes_t packetType; //!< Packet to which the packet status are referring to.
union
{
struct
{
int8_t RssiAvg; //!< The averaged RSSI
int8_t RssiSync; //!< The RSSI measured on last packet
struct
{
bool SyncError :1; //!< SyncWord error on last packet
bool LengthError :1; //!< Length error on last packet
bool CrcError :1; //!< CRC error on last packet
bool AbortError :1; //!< Abort error on last packet
bool HeaderReceived :1; //!< Header received on last packet
bool PacketReceived :1; //!< Packet received
bool PacketControlerBusy :1; //!< Packet controller busy
}ErrorStatus; //!< The error status Byte
struct
{
bool RxNoAck :1; //!< No acknowledgment received for Rx with variable length packets
bool PacketSent :1; //!< Packet sent, only relevant in Tx mode
}TxRxStatus; //!< The Tx/Rx status Byte
uint8_t SyncAddrStatus :3; //!< The id of the correlator who found the packet
}Gfsk;
struct
{
int8_t RssiPkt; //!< The RSSI of the last packet
int8_t SnrPkt; //!< The SNR of the last packet
struct
{
bool SyncError :1; //!< SyncWord error on last packet
bool LengthError :1; //!< Length error on last packet
bool CrcError :1; //!< CRC error on last packet
bool AbortError :1; //!< Abort error on last packet
bool HeaderReceived :1; //!< Header received on last packet
bool PacketReceived :1; //!< Packet received
bool PacketControlerBusy :1; //!< Packet controller busy
}ErrorStatus; //!< The error status Byte
struct
{
bool RxNoAck :1; //!< No acknowledgment received for Rx with variable length packets
bool PacketSent :1; //!< Packet sent, only relevant in Tx mode
}TxRxStatus; //!< The Tx/Rx status Byte
uint8_t SyncAddrStatus :3; //!< The id of the correlator who found the packet
}LoRa;
struct
{
int8_t RssiAvg; //!< The averaged RSSI
int8_t RssiSync; //!< The RSSI of the last packet
struct
{
bool SyncError :1; //!< SyncWord error on last packet
bool LengthError :1; //!< Length error on last packet
bool CrcError :1; //!< CRC error on last packet
bool AbortError :1; //!< Abort error on last packet
bool HeaderReceived :1; //!< Header received on last packet
bool PacketReceived :1; //!< Packet received
bool PacketControlerBusy :1; //!< Packet controller busy
}ErrorStatus; //!< The error status Byte
struct
{
uint8_t RxPid :2; //!< PID of the Rx
bool RxNoAck :1; //!< No acknowledgment received for Rx with variable length packets
bool RxPidErr :1; //!< Received PID error
bool PacketSent :1; //!< Packet sent, only relevant in Tx mode
}TxRxStatus; //!< The Tx/Rx status Byte
uint8_t SyncAddrStatus :3; //!< The id of the correlator who found the packet
}Flrc;
struct
{
int8_t RssiAvg; //!< The averaged RSSI
int8_t RssiSync; //!< The RSSI of the last packet
struct
{
bool SyncError :1; //!< SyncWord error on last packet
bool LengthError :1; //!< Length error on last packet
bool CrcError :1; //!< CRC error on last packet
bool AbortError :1; //!< Abort error on last packet
bool HeaderReceived :1; //!< Header received on last packet
bool PacketReceived :1; //!< Packet received
bool PacketControlerBusy :1; //!< Packet controller busy
}ErrorStatus; //!< The error status Byte
struct
{
bool PacketSent :1; //!< Packet sent, only relevant in Tx mode
}TxRxStatus; //!< The Tx/Rx status Byte
uint8_t SyncAddrStatus :3; //!< The id of the correlator who found the packet
}Ble;
}Params;
}PacketStatus_t;
/*!
* \brief Represents the Rx internal counters values when GFSK or LORA packet type is used
*/
typedef struct
{
RadioPacketTypes_t packetType; //!< Packet to which the packet status are referring to.
union
{
struct
{
uint16_t PacketReceived; //!< Number of received packets
uint16_t CrcError; //!< Number of CRC errors
uint16_t LengthError; //!< Number of length errors
uint16_t SyncwordError; //!< Number of sync-word errors
}Gfsk;
struct
{
uint16_t PacketReceived; //!< Number of received packets
uint16_t CrcError; //!< Number of CRC errors
uint16_t HeaderValid; //!< Number of valid headers
}LoRa;
}Params;
}RxCounter_t;
/*!
* \brief Represents a calibration configuration
*/
typedef struct
{
uint8_t RC64KEnable : 1; //!< Calibrate RC64K clock
uint8_t RC13MEnable : 1; //!< Calibrate RC13M clock
uint8_t PLLEnable : 1; //!< Calibrate PLL
uint8_t ADCPulseEnable : 1; //!< Calibrate ADC Pulse
uint8_t ADCBulkNEnable : 1; //!< Calibrate ADC bulkN
uint8_t ADCBulkPEnable : 1; //!< Calibrate ADC bulkP
}CalibrationParams_t;
/*!
* \brief Represents a sleep mode configuration
*/
typedef struct
{
uint8_t WakeUpRTC : 1; //!< Get out of sleep mode if wakeup signal received from RTC
uint8_t InstructionRamRetention : 1; //!< InstructionRam is conserved during sleep
uint8_t DataBufferRetention : 1; //!< Data buffer is conserved during sleep
uint8_t DataRamRetention : 1; //!< Data ram is conserved during sleep
}SleepParams_t;
/*!
* \brief Compute the two's complement for a register of size lower than
* 32bits
*
* \param [in] num The register to be two's complemented
* \param [in] bitCnt The position of the sign bit
*/
int32_t SX1280complement2( const uint32_t num, const uint8_t bitCnt );
/*!
* \brief Returns the value of LoRa bandwidth from driver's value
*
* The value is returned in Hz so that it can be represented as an integer
* type. Most computation should be done as integer to reduce floating
* point related errors.
*
* \retval loRaBw The value of the current bandwidth in Hz
*/
int32_t SX1280GetLoRaBandwidth( void );
/*!
* \brief Returns the corrected raw value of ranging
*
* \retval correction Corrected ranging raw value
*/
double SX1280GetRangingCorrectionPerSfBwGain( const RadioLoRaSpreadingFactors_t sf, const RadioLoRaBandwidths_t bw, const int8_t gain);
/*!
* \brief Returns the short range corrected distance
*
* \retval Corrected Distance corrected ditance
*/
double SX1280ComputeRangingCorrectionPolynome(const RadioLoRaSpreadingFactors_t sf, const RadioLoRaBandwidths_t bw, const double median);
/*!
* \brief DIOs interrupt callback
*
* \remark Called to handle all 3 DIOs pins
*/
void SX1280OnDioIrq( void );
/*!
* \brief Set the role of the radio during ranging operations
*
* \param [in] role Role of the radio
*/
void SX1280SetRangingRole( RadioRangingRoles_t role );
/*!
* \brief Initializes the radio driver
*/
void SX1280Init( RadioCallbacks_t *callbacks );
/*!
* \brief Set the driver in polling mode.
*
* In polling mode the application is responsible to call ProcessIrqs( ) to
* execute callbacks functions.
* The default mode is Interrupt Mode.
* @code
* // Initializations and callbacks declaration/definition
* radio = SX1280( mosi, miso, sclk, nss, busy, int1, int2, int3, rst, &callbacks );
* radio.Init( );
* radio.SetPollingMode( );
*
* while( true )
* {
* // IRQ processing is automatically done
* radio.ProcessIrqs( ); // <-- here, as well as callback functions
* // calls
* // Do some applicative work
* }
* @endcode
*
* \see SX1280SetInterruptMode
*/
void SX1280SetPollingMode( void );
/*!
* \brief Set the driver in interrupt mode.
*
* In interrupt mode, the driver communicate with the radio during the
* interruption by direct calls to ProcessIrqs( ). The main advantage is
* the possibility to have low power application architecture.
* This is the default mode.
* @code
* // Initializations and callbacks declaration/definition
* radio = SX1280( mosi, miso, sclk, nss, busy, int1, int2, int3, rst, &callbacks );
* radio.Init( );
* radio.SetInterruptMode( ); // Optionnal. Driver default behavior
*
* while( true )
* {
* // Do some applicative work
* }
* @endcode
*
* \see SX1280SetPollingMode
*/
void SX1280SetInterruptMode( void );
/*!
* \brief Initializes the radio registers to the recommended default values
*/
void SX1280SetRegistersDefault( void );
/*!
* \brief Returns the current device firmware version
*
* \retval version Firmware version
*/
uint16_t SX1280GetFirmwareVersion( void );
/*!
* \brief Gets the current Operation Mode of the Radio
*
* \retval RadioOperatingModes_t last operating mode
*/
RadioOperatingModes_t SX1280GetOpMode( void );
/*!
* \brief Gets the current radio status
*
* \retval status Radio status
*/
RadioStatus_t SX1280GetStatus( void );
/*!
* \brief Sets the radio in sleep mode
*
* \param [in] sleepConfig The sleep configuration describing data
* retention and RTC wake-up
*/
void SX1280SetSleep( SleepParams_t sleepConfig );
/*!
* \brief Sets the radio in configuration mode
*
* \param [in] mode The standby mode to put the radio into
*/
void SX1280SetStandby( RadioStandbyModes_t mode );
/*!
* \brief Sets the radio in FS mode
*/
void SX1280SetFs( void );
/*!
* \brief Sets the radio in transmission mode
*
* \param [in] timeout Structure describing the transmission timeout value
*/
void SX1280SetTx( TickTime_t timeout );
/*!
* \brief Sets the radio in reception mode
*
* \param [in] timeout Structure describing the reception timeout value
*/
void SX1280SetRx( TickTime_t timeout );
/*!
* \brief Sets the Rx duty cycle management parameters
*
* \param [in] rxTime Structure describing reception timeout value
* \param [in] sleepTime Structure describing sleep timeout value
*/
void SX1280SetRxDutyCycle( RadioTickSizes_t Step, uint16_t NbStepRx, uint16_t RxNbStepSleep );
/*!
* \brief Sets the radio in CAD mode
*
* \see SX1280::SetCadParams
*/
void SX1280SetCad( void );
/*!
* \brief Sets the radio in continuous wave transmission mode
*/
void SX1280SetTxContinuousWave( void );
/*!
* \brief Sets the radio in continuous preamble transmission mode
*/
void SX1280SetTxContinuousPreamble( void );
/*!
* \brief Sets the radio for the given protocol
*
* \param [in] packetType [PACKET_TYPE_GFSK, PACKET_TYPE_LORA,
* PACKET_TYPE_RANGING, PACKET_TYPE_FLRC,
* PACKET_TYPE_BLE]
*
* \remark This method has to be called before SetRfFrequency,
* SetModulationParams and SetPacketParams
*/
void SX1280SetPacketType( RadioPacketTypes_t packetType );
/*!
* \brief Gets the current radio protocol
*
* \retval packetType [PACKET_TYPE_GFSK, PACKET_TYPE_LORA,
* PACKET_TYPE_RANGING, PACKET_TYPE_FLRC,
* PACKET_TYPE_BLE, PACKET_TYPE_NONE]
*/
RadioPacketTypes_t SX1280GetPacketType( void );
/*!
* \brief Sets the RF frequency
*
* \param [in] frequency RF frequency [Hz]
*/
void SX1280SetRfFrequency( uint32_t frequency );
/*!
* \brief Sets the transmission parameters
*
* \param [in] power RF output power [-18..13] dBm
* \param [in] rampTime Transmission ramp up time
*/
void SX1280SetTxParams( int8_t power, RadioRampTimes_t rampTime );
/*!
* \brief Sets the number of symbols to be used for Channel Activity
* Detection operation
*
* \param [in] cadSymbolNum The number of symbol to use for Channel Activity
* Detection operations [LORA_CAD_01_SYMBOL, LORA_CAD_02_SYMBOL,
* LORA_CAD_04_SYMBOL, LORA_CAD_08_SYMBOL, LORA_CAD_16_SYMBOL]
*/
void SX1280SetCadParams( RadioLoRaCadSymbols_t cadSymbolNum );
/*!
* \brief Sets the data buffer base address for transmission and reception
*
* \param [in] txBaseAddress Transmission base address
* \param [in] rxBaseAddress Reception base address
*/
void SX1280SetBufferBaseAddresses( uint8_t txBaseAddress, uint8_t rxBaseAddress );
/*!
* \brief Set the modulation parameters
*
* \param [in] modParams A structure describing the modulation parameters
*/
void SX1280SetModulationParams( ModulationParams_t *modParams );
/*!
* \brief Sets the packet parameters
*
* \param [in] packetParams A structure describing the packet parameters
*/
void SX1280SetPacketParams( PacketParams_t *packetParams );
/*!
* \brief Gets the last received packet buffer status
*
* \param [out] payloadLength Last received packet payload length
* \param [out] rxStartBuffer Last received packet buffer address pointer
*/
void SX1280GetRxBufferStatus( uint8_t *payloadLength, uint8_t *rxStartBuffer );
/*!
* \brief Gets the last received packet payload length
*
* \param [out] pktStatus A structure of packet status
*/
void SX1280GetPacketStatus( PacketStatus_t *pktStatus );
/*!
* \brief Returns the instantaneous RSSI value for the last packet received
*
* \retval rssiInst Instantaneous RSSI
*/
int8_t SX1280GetRssiInst( void );
/*!
* \brief Sets the IRQ mask and DIO masks
*
* \param [in] irqMask General IRQ mask
* \param [in] dio1Mask DIO1 mask
* \param [in] dio2Mask DIO2 mask
* \param [in] dio3Mask DIO3 mask
*/
void SX1280SetDioIrqParams( uint16_t irqMask, uint16_t dio1Mask, uint16_t dio2Mask, uint16_t dio3Mask );
/*!
* \brief Returns the current IRQ status
*
* \retval irqStatus IRQ status
*/
uint16_t SX1280GetIrqStatus( void );
/*!
* \brief Clears the IRQs
*
* \param [in] irq IRQ(s) to be cleared
*/
void SX1280ClearIrqStatus( uint16_t irq );
/*!
* \brief Calibrates the given radio block
*
* \param [in] calibParam The description of blocks to be calibrated
*/
void SX1280Calibrate( CalibrationParams_t calibParam );
/*!
* \brief Sets the power regulators operating mode
*
* \param [in] mode [0: LDO, 1:DC_DC]
*/
void SX1280SetRegulatorMode( RadioRegulatorModes_t mode );
/*!
* \brief Saves the current selected modem configuration into data RAM
*/
void SX1280SetSaveContext( void );
/*!
* \brief Sets the chip to automatically send a packet after the end of a packet reception
*
* \remark The offset is automatically compensated inside the function
*
* \param [in] time The delay in us after which a Tx is done
*/
void SX1280SetAutoTx( uint16_t time );
/*!
* \brief Stop the chip from automatically sending a packet after the end of a packet reception
* if previously activated with SX1280SetAutoTx command
*
* \see SX1280SetAutoTx
*/
void SX1280StopAutoTx( void );
/*!
* \brief Sets the chip to automatically receive a packet after the end of a packet transmission
*
* \remark The offset is automatically compensated inside the function
*
* \param [in] time The delay in us after which a Rx is done
*/
void SX1280SetAutoFS( uint8_t enable );
/*!
* \brief Enables or disables long preamble detection mode
*
* \param [in] enable [0: Disable, 1: Enable]
*/
void SX1280SetLongPreamble( uint8_t enable );
/*!
* \brief Saves the payload to be send in the radio buffer
*
* \param [in] payload A pointer to the payload
* \param [in] size The size of the payload
*/
void SX1280SetPayload( uint8_t *payload, uint8_t size );
/*!
* \brief Reads the payload received. If the received payload is longer
* than maxSize, then the method returns 1 and do not set size and payload.
*
* \param [out] payload A pointer to a buffer into which the payload will be copied
* \param [out] size A pointer to the size of the payload received
* \param [in] maxSize The maximal size allowed to copy into the buffer
*/
uint8_t SX1280GetPayload( uint8_t *payload, uint8_t *size, uint8_t maxSize );
/*!
* \brief Sends a payload
*
* \param [in] payload A pointer to the payload to send
* \param [in] size The size of the payload to send
* \param [in] timeout The timeout for Tx operation
*/
void SX1280SendPayload( uint8_t *payload, uint8_t size, TickTime_t timeout );
/*!
* \brief Sets the Sync Word given by index used in GFSK, FLRC and BLE protocols
*
* \remark 5th byte isn't used in FLRC and BLE protocols
*
* \param [in] syncWordIdx Index of SyncWord to be set [1..3]
* \param [in] syncWord SyncWord bytes ( 5 bytes )
*
* \retval status [0: OK, 1: NOK]
*/
uint8_t SX1280SetSyncWord( uint8_t syncWordIdx, uint8_t *syncWord );
/*!
* \brief Defines how many error bits are tolerated in sync word detection
*
* \param [in] errorBits Number of error bits supported to validate the Sync word detection
* ( default is 4 bit, minimum is 1 bit )
*/
void SX1280SetSyncWordErrorTolerance( uint8_t errorBits );
/*!
* \brief Sets the Initial value for the LFSR used for the CRC calculation
*
* \param [in] seed Initial LFSR value ( 4 bytes )
*
*/
void SX1280SetCrcSeed( uint16_t seed );
/*!
* \brief Set the Access Address field of BLE packet
*
* \param [in] accessAddress The access address to be used for next BLE packet sent
*/
void SX1280SetBleAccessAddress( uint32_t accessAddress );
/*!
* \brief Set the Access Address for Advertizer BLE packets
*
* All advertizer BLE packets must use a particular value for Access
* Address field. This method sets it.
*
* \see SX1280::SetBleAccessAddress
*/
void SX1280SetBleAdvertizerAccessAddress( void );
/*!
* \brief Sets the seed used for the CRC calculation
*
* \param [in] seed The seed value
*
*/
void SX1280SetCrcPolynomial( uint16_t seed );
/*!
* \brief Sets the Initial value of the LFSR used for the whitening in GFSK, FLRC and BLE protocols
*
* \param [in] seed Initial LFSR value
*/
void SX1280SetWhiteningSeed( uint8_t seed );
/*!
* \brief Enable manual gain and disable AGC
*
* \see SX1280SetManualGainValue, SX1280DisableManualGain
*/
void SX1280EnableManualGain( void );
/*!
* \brief Disable the manual gain control and enable AGC
*
* \see SX1280EnableManualGain
*/
void SX1280DisableManualGain( void );
/*!
* \brief Set the gain for LNA
*
* SX1280EnableManualGain must be call before using this function
*
* \param [in] gain The value of gain to set, refer to datasheet for value meaning
*
* \see SX1280EnableManualGain, SX1280DisableManualGain
*/
void SX1280SetManualGainValue( uint8_t gain );
/*!
* \brief Configure the LNA regime of operation
*
* \param [in] lnaSetting The LNA setting. Possible values are
* LNA_LOW_POWER_MODE and
* LNA_HIGH_SENSITIVITY_MODE
*/
void SX1280SetLNAGainSetting( const RadioLnaSettings_t lnaSetting );
/*!
* \brief Sets the number of bits used to check that ranging request match ranging ID
*
* \param [in] length [0: 8 bits, 1: 16 bits,
* 2: 24 bits, 3: 32 bits]
*/
void SX1280SetRangingIdLength( RadioRangingIdCheckLengths_t length );
/*!
* \brief Sets ranging device id
*
* \param [in] address Device address
*/
void SX1280SetDeviceRangingAddress( uint32_t address );
/*!
* \brief Sets the device id to ping in a ranging request
*
* \param [in] address Address of the device to ping
*/
void SX1280SetRangingRequestAddress( uint32_t address );
/*!
* \brief Return the ranging result value
*
* \param [in] resultType Specifies the type of result.
* [0: RAW, 1: Averaged,
* 2: De-biased, 3:Filtered]
*
* \retval ranging The ranging measure filtered according to resultType [m]
*/
double SX1280GetRangingResult( RadioRangingResultTypes_t resultType );
/*!
* \brief Sets the standard processing delay between Master and Slave
*
* \param [in] cal RxTx delay offset for correcting ranging bias.
*
* The calibration value reflects the group delay of the radio front end and
* must be re-performed for each new SX1280 PCB design. The value is obtained
* empirically by either conducted measurement in a known electrical length
* coaxial RF cable (where the design is connectorised) or by radiated
* measurement, at a known distance, where an antenna is present.
* The result of the calibration process is that the SX1280 ranging result
* accurately reflects the physical range, the calibration procedure therefore
* removes the average timing error from the time-of-flight measurement for a
* given design.
*
* The values are Spreading Factor dependents, and depend also of the board
* design. Some typical values are provided in the next table.
*
* Spreading Factor | Calibration Value
* ---------------- | -----------------
* SF5 | 12200
* SF6 | 12200
* SF7 | 12400
* SF8 | 12650
* SF9 | 12940
* SF10 | 13000
* SF11 | 13060
* SF12 | 13120
*/
void SX1280SetRangingCalibration( uint16_t cal );
/*!
* \brief Return the last ranging result power indicator
*
* The value returned is not an absolute power measurement. It is
* a relative power measurement.
*
* \retval deltaThreshold A relative power indicator
*/
uint8_t SX1280GetRangingPowerDeltaThresholdIndicator( void );
/*!
* \brief Clears the ranging filter
*/
void SX1280RangingClearFilterResult( void );
/*!
* \brief Set the number of samples considered in the built-in filter
*
* \param [in] numSample The number of samples to use built-in filter
* [8..255]
*
* \remark Value inferior to 8 will be silently set to 8
*/
void SX1280RangingSetFilterNumSamples( uint8_t numSample );
/*!
* \brief Return the Estimated Frequency Error in LORA and RANGING operations
*
* \retval efe The estimated frequency error [Hz]
*/
double SX1280GetFrequencyError( void );
/*!
* \brief Process the analysis of radio IRQs and calls callback functions
* depending on radio state
*/
void SX1280ProcessIrqs( void );
/*!
* \brief Clears the instruction RAM
*/
void SX1280ClearInstructionRam( void );
/*!
* \brief Parses 1 HEX file line and writes the content to the instruction memory
*
* \param [in] line HEX file line string
*
* \retval status [0: ERROR, 1:OK]
*/
int8_t SX1280ParseHexFileLine( char* line );
/*!
* \brief Gets individual fields for the given HEX file line
*
* \param [in] line HEX file line string
* \param [out] bytes Bytes array to be written to the instruction memory
* \param [out] addr Instruction memory address where to write the bytes array
* \param [out] num Number of bytes in Bytes array
* \param [out] code HEX file line type [0: instruction, 1: end of file, 2: begin of file]
*
* \retval status [0: ERROR, 1:OK]
*/
int8_t SX1280GetHexFileLineFields( char* line, uint8_t *bytes, uint16_t *addr, uint16_t *num, uint8_t *code );
stm32-sx1280: add custom SX1280AutoTxWillStart
2020-08-18 16:04:38 +02:00
/*!
* /\brief Update operating mode to tx - used to let SX1280ProcessIrqs know that TX is/was active and call the correct handlers
*/
void SX1280AutoTxWillStart(void);
port: new stm32-sx1280 port
2020-07-03 18:10:33 +02:00
#endif // __SX1280_H__
Reference in New Issue Copy Permalink