#target chip

set _CHIPNAME riscv
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000c05

set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
$_TARGETNAME.0 configure -work-area-phys 0x22020000 -work-area-size 0x10000 -work-area-backup 1
$_TARGETNAME.0 configure -rtos auto

echo "Ready for Remote Connections"

$_TARGETNAME.0 configure -event reset-assert-pre {
    echo "reset-assert-pre"
    adapter_khz 100
}

$_TARGETNAME.0 configure -event reset-deassert-post {
    echo "reset-deassert-post"
    adapter_khz 4000
    #reg mstatus 0x80000000
    #reg pc 0x21000000
}

$_TARGETNAME.0 configure -event reset-init {
    echo "reset-init"
# 4MHz for FPGA
    adapter_khz 4000
}

gdb_memory_map enable
gdb_flash_program disable

riscv set_prefer_sba on
riscv set_command_timeout_sec 1

init
#reset init

#jtag arp_init

#resume
#exit