aseprite/docs/files/ase.txt

ASE Files (.ASE) Format description
Copyright (C) 2004-2005, 2007 by David A. Capello
----------------------------------------------------------------------

1. References
2. Introduction
3. Header
4. Frames
5. New chunk types
6. File Format Changes

========================================
1. References
========================================

ASE files use Intel (little-endian) byte order.

BYTE		An 8-bit unsigned integer value
WORD		A 16-bit unsigned integer value
DWORD		A 32-bit unsigned integer value
LONG		A 32-bit signed integer value
DOUBLE		A 64-bit floating point value
BYTE[n]		"n" bytes.
RECT		Four LONGs (in the order: x-pos, y-pos, width, heigth)
STRING		length=WORD (how many characters to read next)
                string=BYTE[length]
		The \0 character isn't included.


========================================
2. Introduction
========================================

The format is the same as FLI/FLC files, with a different magic number
and a different set of chunks (but the new chunks doesn't collided
with the FLI/FLC ones).  Also, the color depth can be 8, 16 or 32 for
Indexed, Grayscale and RGB respectively.  The palette isn't included
for color depths more than 8, but when the sprite is 8 bpp, the
palette is in an old FLI color chunk (type=11).  See fli.txt for
details.


========================================
3. Header
========================================

A 128-byte header (same as FLC/FLI header, but with other magic
number):

DWORD		File size
WORD		Magic number (0xA5E0)
WORD		Frames
WORD		Width in pixels
WORD		Height in pixels
WORD		Color depth (bits per pixel)
DWORD		Flags (must be 0)
WORD		Speed (milliseconds between frame, like in FLC files)
		!!! This field is deprecated, you should use the
		frame duration field from each frame header.
DWORD		Set be 0
DWORD		Set be 0
BYTE[100]	For future (set to zero)


========================================
4. Frames
========================================

After the header come the "frames" data. Each frame has this little
header of 16 bytes:

  DWORD		Bytes in this frame
  WORD		Magic number (always 0xF1FA)
  WORD		Number of "chunks" in frame
  WORD		Frame duration (in milliseconds)		[NEW FIELD!!!]
  BYTE[6]	For future (set to zero)

Then each chunk format is:

  DWORD		Chunk size
  WORD		Chunk type
  BYTE[]	Chunk data


========================================
5. New chunk types
========================================

Layer Chunk (0x2004)
----------------------------------------

  In the first frame should be a set of layer chunks to determine the
  entire layers layout:

  WORD		Flags (1=readable, 2=writable)
  WORD		Layer type (0=normal (image) layer, 1=layer set)
  WORD          Layer child level (see NOTE.1)
  WORD		Default layer width in pixels (ignored)
  WORD		Default layer height in pixels (ignored)
  WORD		Blend mode (always 0 for layer set)
                  BLEND_MODE_NORMAL = 0
                  BLEND_MODE_DISSOLVE = 1
		  BLEND_MODE_MULTIPLY = 2
		  BLEND_MODE_SCREEN = 3
		  BLEND_MODE_OVERLAY = 4
		  BLEND_MODE_HARD_LIGHT = 5
		  BLEND_MODE_DODGE = 6
		  BLEND_MODE_BURN = 7
		  BLEND_MODE_DARKEN = 8
		  BLEND_MODE_LIGHTEN = 9
		  BLEND_MODE_ADDITION = 10
		  BLEND_MODE_SUBTRACT = 11
		  BLEND_MODE_DIFFERENCE = 12
		  BLEND_MODE_HUE = 13
		  BLEND_MODE_SATURATION = 14
		  BLEND_MODE_COLOR = 15
		  BLEND_MODE_LUMINOSITY = 16
		  BLEND_MODE_COPY = 17
  BYTE[4]	For future (set to zero)
  STRING	Layer name


Frame Chunk (0x2005)
----------------------------------------

  This chunk determine where to put a real ASE frame in the specified
  layer.

  WORD		Layer index (see NOTE.2)
  WORD		X position
  WORD		Y position
  BYTE		Opacity level
  WORD		Frame type
  BYTE[7]	For future (set to zero)

  + For frame type = 0 (raw image):

    WORD	Width in pixels
    WORD	Height in pixels
    BYTE[]	Pixel data (see NOTE.3)

  + For frame type = 1 (linked image):

    WORD	Frame position to link with

  + For frame type = 2 (RLE compressed image, only for Indexed images):

    WORD	Width in pixels
    WORD	Height in pixels
    XXXXX	-todo-


Mask Chunk (0x2016)
----------------------------------------

  WORD		X position
  WORD		Y position
  WORD		Width
  WORD		Height
  BYTE[8]	For future (set to zero)
  STRING	Mask name
  BYTE[]	Bit map data (size = height*((width+7)/8))
                Each byte contains 8 pixels (the leftmost pixels are
		packed into the high order bits)


Path Chunk (0x2017)
----------------------------------------


Notes
----------------------------------------

NOTE.1: The child level is used to show the relationship of this
        layer with the last one read, for example:

  Layer name and hierarchy	Child Level
  -----------------------------------------------
  - Background			0
    `- Layer1			1
  - Foreground			0
    |- My set1			1
    |  `- Layer2		2
    `- Layer3			1

NOTE.2: The layer index is a number to identify any layer in the
        sprite, for example:

  Layer name and hierarchy	Layer index
  -----------------------------------------------
  - Background			0
    `- Layer1			1
  - Foreground			2
    |- My set1			3
    |  `- Layer2		4
    `- Layer3			5

NOTE.3: The raw pixel data is saved row by row from top to bottom, and
        each scanline is from pixel by pixel from left to right.
	In RGB images, each pixel have 4 bytes in the order R, G, B, A.
	In Grayscale images, each pixel have 2 bytes in the order K, A.
	In Indexed images, each pixel have 1 byte (the index).


========================================
File Format Changes
========================================

  1) The first change from the first release of the new .ase format,
     is the new frame duration field. This is because now each frame
     can have different duration.

     How to read both formats (old and new one)?  You should set all
     frames durations to the "speed" field read from the main ASE
     header.  Then, if you found a frame with the frame-duration
     field > 0, you should update the frame's duration with that
     value.