# If no external IP address is given, the local IP address is used
# external_ip = 123.456.789.12

# The private key must be 2048 bits
# pkey = /dir/pkey.pem

# The certificate must be signed with a 2048 bit key
# cert = /dir/cert.pem

# The name displayed by Moonlight
# If not specified, the PC's hostname is used
# sunshine_name = Sunshine

# The minimum log level printed to standard out
#
# none -> no logs are printed to standard out
#
# verbose = [0]
# debug   = [1]
# info    = [2]
# warning = [3]
# error   = [4]
# fatal   = [5]
# none    = [6]
#
# min_log_level = info

# The origin of the remote endpoint address that is not denied for HTTP method /pin
# Could be any of the following values:
#   pc|lan|wan
#     pc: Only localhost may access /pin
#     lan: Only those in LAN may access /pin
#     wan: Anyone may access /pin
#
# origin_pin_allowed = lan

# Pretty self-explanatory
unique_id = 03904e64-51da-4fb3-9afd-a9f7ff70fea4

# The file where info on paired devices is stored 
# file_devices = devices.json

# How long to wait in milliseconds for data from moonlight before shutting down the stream
ping_timeout = 2000

# The file where configuration for the different applications that Sunshine can run during a stream
# file_apps = apps.json

# How much error correcting packets must be send for every video
# This is just some random number, don't know the optimal value
# The higher fec_percentage, the lower space for the actual data to send per frame there is
#
# The value must be greater than 0 and lower than or equal to 100
fec_percentage = 10


# The back/select button on the controller
# On the Shield, the home and powerbutton are not passed to Moonlight
# If, after the timeout, the back button is still pressed down, Home/Guide button press is emulated.
# If back_button_timeout < 0, then the Home/Guide button will not be emulated
# back_button_timeout = 2000

# The name of the audio sink used for Audio Loopback
# If you do not specify this variable, pulseaudio will select the default monitor device.
#
# You can find the name of the audio sink using the following command:
# pacmd list-sources | grep "name:"
# audio_sink = alsa_output.pci-0000_09_00.3.analog-stereo.monitor


###############################################
# FFmpeg software encoding parameters
# Honestly, I have no idea what the optimal values would be.
# Play around with this :)

# Constant Rate Factor. Between 1 and 52. It allows QP to go up during motion and down with still image, resulting in constant perceived quality
# Higher value means more compression, but less quality
# If crf == 0, then use QP directly instead
crf = 0

# Quantitization Parameter
# Higher value means more compression, but less quality
# If crf != 0, then this parameter is ignored
qp = 28

# Number of threads used by ffmpeg to encode the video
threads = 8


# See x264 --fullhelp for the different presets
profile = baseline
preset  = superfast
tune    = zerolatency