* First crack at RETRO_ENVIRONMENT_GET_POWER_STATUS
* First crack at RETRO_ENVIRONMENT_GET_POWER_STATUS
* Remove a stray comma
* Rename some symbols for clarity
* Change some references to the old environment call's name
* Fix some mixed-up cases in checking the power state
- I misunderstood the meaning of these enums
* Add a comment
* Rename seconds_remaining to seconds
* Clarify some comments about the power state
* Adjust power state behavior
- Don't return 0 seconds; instead, return NO_ESTIMATE
- Don't force percent to 100 in the CHARGED state
* Adhere to C89
* Mention the environment call in CHANGES.md
- Enable core host to refuse connecting new players to limit the number of connected players
- Enable a core to flush outgoing packets and read incoming packets without waiting for the next frame (can be used for lower latency or blocking reads)
Adds a new libretro interface for a core to send and receive custom network packets for implementing a communication based multiplayer system instead of using the default state serialization based multiplayer. Connection management is still done by the frontend while a core gains the ability to easily support tunneling of multi-console data communication traffic.
assignments for strings longer than 2 chars
- Use strlcpy concatenation instead of strlcat
- Make sure that what remains of iteration of the '_len' variable
for manual char assignment
is done in a safer way so mistakes are less possible
usage of strlcpy (when position/offset of previous strlcpy/snprintf call
is known. strlcat implementation in libretro-common makes implicit strlen
call, using strlcpy avoids this
* Reduce a bunch of local char variables by use of said clever usage,
should save up on local stack size usage
* Some slight fixes
* Update libretro.h
* Log calls to RETRO_ENVIRONMENT_GET_MICROPHONE_INTERFACE
* Finish proof-of-concept for mic support
- It works, but doesn't support floating-point audio yet
- It may need to be resampled, too
* Add macros that aren't available in SDL 2
* Comment out a variable definition for now
- For C89 compliance
* Add some comments for clarity
* Let ALSA tolerate a null new_rate
* Partial ALSA microphone support
- Not yet tested
- Mic is created and destroyed
- Mic can also be paused or unpaused
- Mic is paused or unpaused with the rest of the driver
- Microphone is not yet read
* Install error logging in the ALSA driver
- It defers to RARCH_ERR
* Free the ALSA microphone in alsa_free
* Fix an indent
* First draft of alsa_read_microphone
* Deinitialize SDL Audio in sdl_audio_free
* Save and restore the ALSA error logger
- You should always practice safe global state
* Add newlines to some RARCH_ERRs
* Add some logging
* Check for the mic being active via settings instead of via flags
* Adjusted a log entry to be less misleading
- A frequency of 0Hz looks weird to the uninformed
- In reality, it means the driver used the requested frequency
* Fix an incorrect format string
* Tidy up logging in alsa.c
* Rename audio_enable_microphone to audio_enable_input
* Rename microphone_device to audio_input_device
* Add audio_input_latency and audio_input_block_frames settings
* Add all mic-related settings to the options menu
* Adjust logging for alsa.c
- Log the ALSA library version
- Add errno details
* Refer to the microphone in logs by name
* Use %u instead of %d for some log items
* Add input_samples_buf
* Remove an inaccurate comment
* Change type of input_samples_buf
* Clean up audio_driver_flush_microphone_input
* Comment convert_float_to_s16
- It helped me understand what it's doing
- Turns out it'll work just fine on mono audio
* Don't use the resampler for mic input
* Fix crash in the ALSA driver when reading from a mic
* Update some logging messages
* ALSA support now works for mics
* Reuse some common functions in alsa.c
* Add alsa_thread_microphone_t
* Refactor alsa.c
- Introduce alsa_init_pcm to init any PCM that we're using
- Vastly simplifies the implementation of alsa_init and alsa_init_microphone
- Will be used for the read-based versions next
* Make ALSA logging a little more consistent
* Clean up the mic with alsa_free_microphone if alsa_init_microphone fails
* Remove an unused function
* Move some cleanup in alsa.c to a common function
* First crack at mic support for alsathread
- Refactor some duplicate code into functions
- Use functions introduced in alsa.c
- Create and destroy the mic
* Slight cleanups for clarity
* Implement alsa_thread_set/get_microphone_state
* More work on alsathread
- No more crashing, but the mic just returns silence
* Slight cleanups for clarity
* Add alsa_set_mic_enabled_internal
- For setting the state of a microphone while considering its current state
* Use alsa_set_mic_enabled_internal
* Log a little more info
* Log when the audio driver is started/stopped
* Move base microphone driver code into a new directory
- Add microphone_driver.c to Makefile.common
- Rename functions as needed
* Initialize and deinitialize the microphone driver
* Implement sdl_microphone.c
* Un-const an argument
- In case the driver context needs to do any locking
* Revise comments for microphone_driver.h
* Remove an unimplemented function
* Remove some functions from the mic driver
* Remove mic functions from audio_thread_wrapper
* Remove mic functions from sdl_audio
* Fix microphone_null
* Split the mic code for the alsa audio drivers into microphone drivers
* Fix an extra struct member
* Add a setting for the mic driver
* Add a command to reinitialize the microphone driver
* Rename mic-related settings
* Add DRIVER_MICROPHONE_MASK to DRIVERS_CMD_ALL
* Rename audio_enable_input to microphone_enable
* Remove some labels from qt_options
* Search for microphone_driver within find_driver_nonempty
* Clean up some mic driver code
* Pending mics now return silence
* Adjust some logging and comments
* Some cleanup in the microphone driver
* Invert a flag check
- Oops
* Fix a log message
* Fix the wrong flags being checked
* Slight refactor of wasapi_init_device
- Add a data_flow parameter
- Declare it in a header
- In preparation for WASAPI mic support
* Add some WASAPI macros for _IAudioCaptureClient
* Move some common WASAPI functions to audio/common/wasapi.c
- They'll be used by the mic and the audio drivers
* Add wasapi_log_hr
* Generalize mmdevice_list_new to look for capture devices, too
* Fix a function declaration
* Move driver-specific device_list_new functions into their respective files
* Clean up some declarations
* First draft of wasapi microphone driver
* Add wasapi_microphone_device_list_free
* Change function parameter names to be consistent with microphone_driver
* Partially implement wasapi_microphone_read
- Mostly copied from the audio driver so far
- It doesn't compile yet
- But it'll be beautiful when I'm done with it
* Refactor the mic driver's functions
- Rename get_mic_active to mic_alive
- Split set_mic_active into start_mic and stop_mic
- Refactor the SDL mic driver accordingly
* Edit some WASAPI functions for logging and clarity
* Implement more of the WASAPI mic driver
* Rename write_event to read_event
* Pass the WASAPI driver context to the various read functions
* Mostly implement the read function for the WASAPI mic driver
* Fix a crash in microphone_driver
- Forgot to move the position of the name of null_driver
* Reduce some logging in wasapi common functions
- Only log the chosen audio client format, not all attempted ones
* Add some macro wrappers for IAudioClient methods
* Update mic driver configuration
- Make the mic driver configurable in the menu
- Add config items for WASAPI-related options similar to the audio driver
* Fix a menu entry scrolling through audio devices instead of mic devices
* Add some utility functions
* Expose the new utility functions in wasapi.h
* Add extra logging in the WASAPI common functions
* Add sharemode_name
* Use _IAudioClient_Initialize macro in some places
* Pass channels to wasapi_init_client
- Remember, mics are in mono
* Use _IAudioClient_Initialize macro some more
* Forgot to pass channels in some places
* Add some utility functions
* Forgot an #include
* Add wasapi_select_device_format
* Simplify the format selection logic in wasapi_init_client_sh
* Unset the microphone in wasapi_microphone_close_mic
- Ought to prevent a potential segfault
* Simplify some logging
* Fix incorrect value being passed to _IAudioCaptureClient_ReleaseBuffer
* Remove some unneeded logging
* Add some values to hresult_name
* Polish up wasapi_select_device_format
- Test for formats manually when Windows can't
- Add some debug logging
- Check for channels
* Compute the fields of WAVEFORMATEXTENSIBLE correctly
- As per the doc's stated requirements
* Simplify logic for WASAPI client creation
* Fix a potential hang in wasapi_microphone_read_shared_buffered
* Stop the microphone if the driver is stopped
* Don't name the microphone event
* Ensure that wasapi_init_client reports the correct format and rate
* Implement exclusive microphone read access for WASAPI
* Add _IAudioCaptureClient_GetNextPacketSize macro
* Organize cases in hresult_name
* Clear some extra fields if wasapi_set_format is setting a Pcm format
* Adjust some logs
* Adjust some logs
* Remove unneeded local vars
* Add a log
* Update wasapi.c
* Update wasapi.c
* Fix shared-mode mic support in WASAPI producing broken input
- Turns out it had nothing to do with shared mode
* Reuse a common function
- Remove wasapi_microphone_read_shared_buffered
- Rename wasapi_microphone_read_exclusive to wasapi_microphone_read_buffered
* Remove some code I was using for test purposes
* Clarify some language
* Double the default shared-mode mic buffer length
* Split getting a device's name into a separate function, then use it
* Fix the ALSA mic drivers
- To comply with changes I previously made to the mic driver interface
* Remove unused synchronization primitives from the SDL microphone driver
* Add sdl_microphone_mic_use_float
* Document audio_driver_state_flags
- I needed to understand these to see if similar flags were required for the mic driver
* Remove an unused function in wasapi.c
* Add and document flags in microphone_driver.h
* Remove driver-specific mic start/stop functions
- The mic driver itself doesn't do much processing
- That honor goes to individual mics
* Remove some unused fields in microphone_driver.h
* Add CMD_EVENT_MICROPHONE_STOP/START
* Remove unused functions from microphone_null
* Change how the mic driver state is referenced in some places
* Simplify the SDL microphone driver
- The driver backend no longer keeps a reference to the mic (the frontend does that)
- Remove functions that are no longer needed
- Don't track paused state, just query the mic itself
* Simplify the WASAPI microphone driver
- Don't track the driver running state or the microphone handle, the frontend does that now
- Remove support for unbuffered input (hunterk suggested that it wasn't necessary)
* Make microphone_wasapi_sh_buffer_length a uint, not an int
- It won't be negative anymore
- 0 now represents the default value
* Make the microphone frontend more robust
- Improve documentation for how various functions should be implemented
- Closes all microphones before freeing the driver (so backends don't have to)
- Tracks the enabled state of each microphone, so backends don't have to (but they still can)
* Stop the mic driver in core_unload_game
* Ensure mic support is compatible with the revised menu code
* Move alsa.h into audio/common
* Remove RETRO_ENVIRONMENT_GET_MICROPHONE_ENABLED
- It was never really needed
* Refactor the ALSA microphone driver
- Move common ALSA functions to audio/common/alsa.c
- Replace alsa_set_mic_enabled_internal with alsa_start/stop_pcm
- Don't track the microphone handle in the ALSA driver context
- Remove unneeded fields
* Move some common alsathread code into audio/common/alsathread.c
* Change return type of mic_driver_open_mic_internal to bool
* First crack at resampling mic input
* Remove an extraneous check
- I think something distracted me when I was writing this line
* Add stereo/mono conversion functions
* Make alsa_start_pcm and alsa_stop_pcm more robust
- They now return success if the stream is already running and stopped, respectively
* Revise some mic-related comments in libretro.h
* First crack at resampling mic input
* Simplify an expression
* Simplify an expression
* Fix a log tag
* Allow mic resampler to be configured separately from audio resampler
* Add some comments
* Set the source ratio to something sensible
* Stop deadlock in `alsathread` mic driver
* Allow mics to be initialized even when core is loaded from CLI
- When loading content from CLI, the drivers are initialized a little differently
- That threw off the mic initialization code
* Rename the functions in retro_microphone_interface
* Revise some mic-related comments in libretro.h
* Update retro_microphone_interface
- Add get_mic_rate
- Add a parameter to open_mic
- The modifications don't do anything yet
* Use parameter objects in the microphone handle
* Replace get_mic_rate with get_params
* Add a microphone interface version
* Remove part of a comment
* Set the effective params in mic_driver_microphone_handle_init
* Drop a stray newline
* Change where the mic interface is zeroed
- I was accidentally throwing out the version that the core was asking for
* Reduce logspam for wasapi_set_nonblock_state
- Now it only logs when the sync mode is changed
* Change DEFAULT_WASAPI_SH_BUFFER_LENGTH to 0
- -16 is no longer a valid value
* Set the new_rate in wasapi_init
* Change description of microphone sample rate in the settings
* First attempt at resampling configured mic input
* Forgot a section
* Fix some input samples being skipped
* Rename a variable for clarity
* Add microphone.outgoing_samples
* Update the mic driver
- Processed samples are now buffered
- The resampler is skipped if the ratio is (very close to) 1
* Remove part of a comment
* Update some comments in audio_resampler.h
* Slightly refactor the SDL microphone driver
- Move SDL_AudioSpec to a field of sdl_microphone_handle_t
- Allow SDL to change the requested format and sample rate
- Request floating-point input
- Implement sdl_microphone_mic_use_float
* Fix a non-C89-compliant declaration
* Add new files to griffin.c
* Remove a C++-style comment
* Add two more files to griffin.c
* Remove some unneeded declarations in microphone_driver.h
* Remove a stray comma in configuration.c
- For C89 compliance
* Fix compilation on some platforms
* Change some function signatures
* Make the ALSA drivers always set the audio rate
* Fix the alsathread mic driver
* Make state_manager_frame_is_reversed return false if HAVE_REWIND isn't defined
* Mute the microphone if the core is running in fast-forward, slow-mo, or rewind
* Clarify a comment
* Clarify a comment
* Add a comment
* Don't allocate memory for slowmo samples in the mic driver
- We're not supporting slowmo for mics, so it's not needed
* Fix a {
* Add my name to AUTHORS.h
* Add driver_lifetime_flags
- For drivers that have special setup/teardown needs
* Ensure that resetting the mic driver maintains active mic handles
- Prevents fullscreen toggle from stopping all mic input
* Update CHANGES.md
* Move some default microphone settings to a new part of the config file
* Ensure that RetroArch can use the audio format that Windows suggests
* Remove references to mic support in the SDL audio driver
* Remove unused WASAPI functions
* Return failure if RetroArch couldn't select a WASAPI format
* Ensure that Windows uses the WASAPI mic driver by default
* Treat disabled mic support as a warning, not an error
* Clarify some WASAPI-related microphone settings
* Remove some unused variables
* Add or revise microphone-related comments
* Rearrange doc comments for microphone types in libretro.h
* Remove a space
* Remove some unused flags
* Remove ALSA error logger
- It was never used anyway
* Remove unneeded microphone-related arguments
* Document a parameter
* Remove a logging call
* Add a constant for the microphone's shared buffer length for WASAPI
* Fix stylistic inconsistencies
* Make mic_driver_get_sample_size a macro instead of a function
* Move the microphone implementation to the audio directory
* Make microphone support optional (but enabled by default)
* Fix the griffin build
