From 2ff16727a6c15cb358002d03f284428477b7b7ed Mon Sep 17 00:00:00 2001
From: twinaphex <autechre1024@hotmail.com>
Date: Sun, 17 Feb 2013 00:43:45 +0100
Subject: [PATCH] (miniz) Take out header cruft to do with deflation routines
---
deps/miniz/zlib.h | 130 ----------------------------------------------
1 file changed, 130 deletions(-)
diff --git a/deps/miniz/zlib.h b/deps/miniz/zlib.h
index eeb01ac6c9..305164b91b 100644
--- a/deps/miniz/zlib.h
+++ b/deps/miniz/zlib.h
@@ -677,136 +677,6 @@ struct tinfl_decompressor_tag
mz_uint8 m_raw_header[4], m_len_codes[TINFL_MAX_HUFF_SYMBOLS_0 + TINFL_MAX_HUFF_SYMBOLS_1 + 137];
};
-// ------------------- Low-level Compression API Definitions
-
-// Set TDEFL_LESS_MEMORY to 1 to use less memory (compression will be slightly slower, and raw/dynamic blocks will be output more frequently).
-#define TDEFL_LESS_MEMORY 1
-
-// tdefl_init() compression flags logically OR'd together (low 12 bits contain the max. number of probes per dictionary search):
-// TDEFL_DEFAULT_MAX_PROBES: The compressor defaults to 128 dictionary probes per dictionary search. 0=Huffman only, 1=Huffman+LZ (fastest/crap compression), 4095=Huffman+LZ (slowest/best compression).
-enum
-{
- TDEFL_HUFFMAN_ONLY = 0, TDEFL_DEFAULT_MAX_PROBES = 128, TDEFL_MAX_PROBES_MASK = 0xFFF
-};
-
-// TDEFL_WRITE_ZLIB_HEADER: If set, the compressor outputs a zlib header before the deflate data, and the Adler-32 of the source data at the end. Otherwise, you'll get raw deflate data.
-// TDEFL_COMPUTE_ADLER32: Always compute the adler-32 of the input data (even when not writing zlib headers).
-// TDEFL_GREEDY_PARSING_FLAG: Set to use faster greedy parsing, instead of more efficient lazy parsing.
-// TDEFL_NONDETERMINISTIC_PARSING_FLAG: Enable to decrease the compressor's initialization time to the minimum, but the output may vary from run to run given the same input (depending on the contents of memory).
-// TDEFL_RLE_MATCHES: Only look for RLE matches (matches with a distance of 1)
-// TDEFL_FILTER_MATCHES: Discards matches <= 5 chars if enabled.
-// TDEFL_FORCE_ALL_STATIC_BLOCKS: Disable usage of optimized Huffman tables.
-// TDEFL_FORCE_ALL_RAW_BLOCKS: Only use raw (uncompressed) deflate blocks.
-enum
-{
- TDEFL_WRITE_ZLIB_HEADER = 0x01000,
- TDEFL_COMPUTE_ADLER32 = 0x02000,
- TDEFL_GREEDY_PARSING_FLAG = 0x04000,
- TDEFL_NONDETERMINISTIC_PARSING_FLAG = 0x08000,
- TDEFL_RLE_MATCHES = 0x10000,
- TDEFL_FILTER_MATCHES = 0x20000,
- TDEFL_FORCE_ALL_STATIC_BLOCKS = 0x40000,
- TDEFL_FORCE_ALL_RAW_BLOCKS = 0x80000
-};
-
-// High level compression functions:
-// tdefl_compress_mem_to_heap() compresses a block in memory to a heap block allocated via malloc().
-// On entry:
-// pSrc_buf, src_buf_len: Pointer and size of source block to compress.
-// flags: The max match finder probes (default is 128) logically OR'd against the above flags. Higher probes are slower but improve compression.
-// On return:
-// Function returns a pointer to the compressed data, or NULL on failure.
-// *pOut_len will be set to the compressed data's size, which could be larger than src_buf_len on uncompressible data.
-// The caller must free() the returned block when it's no longer needed.
-void *tdefl_compress_mem_to_heap(const void *pSrc_buf, size_t src_buf_len, size_t *pOut_len, int flags);
-
-// tdefl_compress_mem_to_mem() compresses a block in memory to another block in memory.
-// Returns 0 on failure.
-size_t tdefl_compress_mem_to_mem(void *pOut_buf, size_t out_buf_len, const void *pSrc_buf, size_t src_buf_len, int flags);
-
-// Output stream interface. The compressor uses this interface to write compressed data. It'll typically be called TDEFL_OUT_BUF_SIZE at a time.
-typedef mz_bool (*tdefl_put_buf_func_ptr)(const void* pBuf, int len, void *pUser);
-
-// tdefl_compress_mem_to_output() compresses a block to an output stream. The above helpers use this function internally.
-mz_bool tdefl_compress_mem_to_output(const void *pBuf, size_t buf_len, tdefl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags);
-
-enum { TDEFL_MAX_HUFF_TABLES = 3, TDEFL_MAX_HUFF_SYMBOLS_0 = 288, TDEFL_MAX_HUFF_SYMBOLS_1 = 32, TDEFL_MAX_HUFF_SYMBOLS_2 = 19, TDEFL_LZ_DICT_SIZE = 32768, TDEFL_LZ_DICT_SIZE_MASK = TDEFL_LZ_DICT_SIZE - 1, TDEFL_MIN_MATCH_LEN = 3, TDEFL_MAX_MATCH_LEN = 258 };
-
-// TDEFL_OUT_BUF_SIZE MUST be large enough to hold a single entire compressed output block (using static/fixed Huffman codes).
-enum { TDEFL_LZ_CODE_BUF_SIZE = 24 * 1024, TDEFL_OUT_BUF_SIZE = (TDEFL_LZ_CODE_BUF_SIZE * 13 ) / 10, TDEFL_MAX_HUFF_SYMBOLS = 288, TDEFL_LZ_HASH_BITS = 12, TDEFL_LEVEL1_HASH_SIZE_MASK = 4095, TDEFL_LZ_HASH_SHIFT = (TDEFL_LZ_HASH_BITS + 2) / 3, TDEFL_LZ_HASH_SIZE = 1 << TDEFL_LZ_HASH_BITS };
-
-// The low-level tdefl functions below may be used directly if the above helper functions aren't flexible enough. The low-level functions don't make any heap allocations, unlike the above helper functions.
-typedef enum
-{
- TDEFL_STATUS_BAD_PARAM = -2,
- TDEFL_STATUS_PUT_BUF_FAILED = -1,
- TDEFL_STATUS_OKAY = 0,
- TDEFL_STATUS_DONE = 1,
-} tdefl_status;
-
-// Must map to MZ_NO_FLUSH, MZ_SYNC_FLUSH, etc. enums
-typedef enum
-{
- TDEFL_NO_FLUSH = 0,
- TDEFL_SYNC_FLUSH = 2,
- TDEFL_FULL_FLUSH = 3,
- TDEFL_FINISH = 4
-} tdefl_flush;
-
-// tdefl's compression state structure.
-typedef struct
-{
- tdefl_put_buf_func_ptr m_pPut_buf_func;
- void *m_pPut_buf_user;
- mz_uint m_flags, m_max_probes[2];
- int m_greedy_parsing;
- mz_uint m_adler32, m_lookahead_pos, m_lookahead_size, m_dict_size;
- mz_uint8 *m_pLZ_code_buf, *m_pLZ_flags, *m_pOutput_buf, *m_pOutput_buf_end;
- mz_uint m_num_flags_left, m_total_lz_bytes, m_lz_code_buf_dict_pos, m_bits_in, m_bit_buffer;
- mz_uint m_saved_match_dist, m_saved_match_len, m_saved_lit, m_output_flush_ofs, m_output_flush_remaining, m_finished, m_block_index, m_wants_to_finish;
- tdefl_status m_prev_return_status;
- const void *m_pIn_buf;
- void *m_pOut_buf;
- size_t *m_pIn_buf_size, *m_pOut_buf_size;
- tdefl_flush m_flush;
- const mz_uint8 *m_pSrc;
- size_t m_src_buf_left, m_out_buf_ofs;
- mz_uint8 m_dict[TDEFL_LZ_DICT_SIZE + TDEFL_MAX_MATCH_LEN - 1];
- mz_uint16 m_huff_count[TDEFL_MAX_HUFF_TABLES][TDEFL_MAX_HUFF_SYMBOLS];
- mz_uint16 m_huff_codes[TDEFL_MAX_HUFF_TABLES][TDEFL_MAX_HUFF_SYMBOLS];
- mz_uint8 m_huff_code_sizes[TDEFL_MAX_HUFF_TABLES][TDEFL_MAX_HUFF_SYMBOLS];
- mz_uint8 m_lz_code_buf[TDEFL_LZ_CODE_BUF_SIZE];
- mz_uint16 m_next[TDEFL_LZ_DICT_SIZE];
- mz_uint16 m_hash[TDEFL_LZ_HASH_SIZE];
- mz_uint8 m_output_buf[TDEFL_OUT_BUF_SIZE];
-} tdefl_compressor;
-
-// Initializes the compressor.
-// There is no corresponding deinit() function because the tdefl API's do not dynamically allocate memory.
-// pBut_buf_func: If NULL, output data will be supplied to the specified callback. In this case, the user should call the tdefl_compress_buffer() API for compression.
-// If pBut_buf_func is NULL the user should always call the tdefl_compress() API.
-// flags: See the above enums (TDEFL_HUFFMAN_ONLY, TDEFL_WRITE_ZLIB_HEADER, etc.)
-tdefl_status tdefl_init(tdefl_compressor *d, tdefl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags);
-
-// Compresses a block of data, consuming as much of the specified input buffer as possible, and writing as much compressed data to the specified output buffer as possible.
-tdefl_status tdefl_compress(tdefl_compressor *d, const void *pIn_buf, size_t *pIn_buf_size, void *pOut_buf, size_t *pOut_buf_size, tdefl_flush flush);
-
-// tdefl_compress_buffer() is only usable when the tdefl_init() is called with a non-NULL tdefl_put_buf_func_ptr.
-// tdefl_compress_buffer() always consumes the entire input buffer.
-tdefl_status tdefl_compress_buffer(tdefl_compressor *d, const void *pIn_buf, size_t in_buf_size, tdefl_flush flush);
-
-tdefl_status tdefl_get_prev_return_status(tdefl_compressor *d);
-mz_uint32 tdefl_get_adler32(tdefl_compressor *d);
-
-// Can't use tdefl_create_comp_flags_from_zip_params if MINIZ_NO_ZLIB_APIS isn't defined, because it uses some of its macros.
-#ifndef MINIZ_NO_ZLIB_APIS
-// Create tdefl_compress() flags given zlib-style compression parameters.
-// level may range from [0,10] (where 10 is absolute max compression, but may be much slower on some files)
-// window_bits may be -15 (raw deflate) or 15 (zlib)
-// strategy may be either MZ_DEFAULT_STRATEGY, MZ_FILTERED, MZ_HUFFMAN_ONLY, MZ_RLE, or MZ_FIXED
-mz_uint tdefl_create_comp_flags_from_zip_params(int level, int window_bits, int strategy);
-#endif // #ifndef MINIZ_NO_ZLIB_APIS
-
#ifdef __cplusplus
}
#endif