diff --git a/debian/patches/rgui-config.patch b/debian/patches/rgui-config.patch
new file mode 100644
index 0000000000..a680a89d5a
--- /dev/null
+++ b/debian/patches/rgui-config.patch
@@ -0,0 +1,82 @@
+Index: RetroArch_fork/retroarch.cfg
+===================================================================
+--- RetroArch_fork.orig/retroarch.cfg	2014-08-19 18:54:11.284946000 -0300
++++ RetroArch_fork/retroarch.cfg	2014-08-19 19:05:16.496941000 -0300
+@@ -25,10 +25,10 @@
+ # libretro_path = "/path/to/libretro.so"
+ 
+ # A directory for where to search for libretro core implementations.
+-# libretro_directory =
++libretro_directory = "/usr/lib/libretro/"
+ 
+ # A directory for where to search for libretro core information.
+-# libretro_info_path =
++libretro_info_path = "/usr/share/libretro/info/"
+ 
+ # Sets log level for libretro cores (GET_LOG_INTERFACE).
+ # If a log level issued by a libretro core is below libretro_log_level, it is ignored.
+@@ -61,7 +61,7 @@
+ # system_directory =
+ 
+ # Sets start directory for menu content browser.
+-# rgui_browser_directory =
++rgui_browser_directory = "~/"
+ 
+ # Content directory. Interacts with RETRO_ENVIRONMENT_GET_CONTENT_DIRECTORY.
+ # Usually set by developers who bundle libretro/RetroArch apps to point to assets.
+@@ -69,10 +69,10 @@
+ 
+ # Assets directory. This location is queried by default when menu interfaces try to look for
+ # loadable assets, etc.
+-# assets_directory =
++assets_directory = "/usr/share/libretro/assets/"
+ 
+ # Sets start directory for menu config browser.
+-# rgui_config_directory =
++rgui_config_directory = "~/.config/retroarch/"
+ 
+ # Show startup screen in menu.
+ # Is automatically set to false when seen for the first time.
+@@ -172,13 +172,13 @@
+ # video_shader_enable = false
+ 
+ # Defines a directory where shaders (Cg, CGP, GLSL) are kept for easy access.
+-# video_shader_dir =
++video_shader_dir = "/usr/share/libretro/shaders/"
+ 
+ # CPU-based video filter. Path to a dynamic library.
+ # video_filter =
+ 
+ # Defines a directory where CPU-based video filters are kept.
+-# video_filter_dir =
++video_filter_dir = "/usr/lib/retroarch/filters/video/"
+ 
+ # Path to a font used for rendering messages. This path must be defined to enable fonts.
+ # Do note that the _full_ path of the font is necessary!
+@@ -235,7 +235,7 @@
+ # audio_dsp_plugin =
+ 
+ # Directory where DSP plugins are kept.
+-# audio_filter_dir =
++audio_filter_dir = "/usr/lib/retroarch/filters/audio/"
+ 
+ # Will sync (block) on audio. Recommended.
+ # audio_sync = true
+@@ -258,7 +258,7 @@
+ #### Overlay
+ 
+ # Defines a directory where overlays are kept for easy access.
+-# overlay_directory =
++overlay_directory = "/usr/share/libretro/overlays/"
+ 
+ # Path to input overlay
+ # input_overlay =
+@@ -294,7 +294,7 @@
+ # Input binds which are made explicit (input_playerN_*_btn/axis) will take priority over autoconfigs.
+ # Autoconfigs can be created with retroarch-joyconfig, manually, or with a frontend.
+ # Requires input_autodetect_enable to be enabled.
+-# joypad_autoconfig_dir =
++joypad_autoconfig_dir = "/usr/share/libretro/autoconfig/"
+ 
+ # Sets which libretro device is used for a player.
+ # Devices are indentified with a number.
diff --git a/debian/patches/series b/debian/patches/series
new file mode 100644
index 0000000000..215aaa1a2b
--- /dev/null
+++ b/debian/patches/series
@@ -0,0 +1 @@
+rgui-config.patch
diff --git a/debian/retroarch.cfg b/debian/retroarch.cfg
deleted file mode 100644
index 94fc6ec7b5..0000000000
--- a/debian/retroarch.cfg
+++ /dev/null
@@ -1,619 +0,0 @@
-## Skeleton config file for RetroArch
-
-# Save all save files (*.srm) to this directory. This includes related files like .bsv, .rtc, .psrm, etc ...
-# This will be overridden by explicit command line options.
-# savefile_directory =
-
-# Save all save states (*.state) to this directory.
-# This will be overridden by explicit command line options.
-# savestate_directory =
-
-# If set to a directory, Content which is temporarily extracted
-# will be extracted to this directory.
-# extraction_directory =
-
-# Automatically saves a savestate at the end of RetroArch's lifetime.
-# The path is $SRAM_PATH.auto.
-# RetroArch will automatically load any savestate with this path on startup if savestate_auto_load is set.
-# savestate_auto_save = false
-# savestate_auto_load = true
-
-# Load libretro from a dynamic location for dynamically built RetroArch.
-# This option is mandatory.
-
-# Path to a libretro implementation.
-# libretro_path = "/path/to/libretro.so"
-
-# A directory for where to search for libretro core implementations.
-libretro_directory = "/usr/lib/libretro/"
-
-# A directory for where to search for libretro core information.
-libretro_info_path = "/usr/share/libretro/info/"
-
-# Sets log level for libretro cores (GET_LOG_INTERFACE).
-# If a log level issued by a libretro core is below libretro_log_level, it is ignored.
-# DEBUG logs are always ignored unless verbose mode is activated (--verbose).
-# DEBUG = 0, INFO = 1, WARN = 2, ERROR = 3.
-# libretro_log_level = 0
-
-# Enable or disable verbosity level of frontend.
-# log_verbosity = false
-
-# Enable or disable RetroArch performance counters
-# perfcnt_enable = false
-
-# Path to core options config file.
-# This config file is used to expose core-specific options.
-# It will be written to by RetroArch.
-# A default path will be assigned if not set.
-# core_options_path =
-
-# Path to content load history file.
-# RetroArch keeps track of all content loaded in the menu and from CLI directly for convenient quick loading.
-# A default path will be assigned if not set.
-# game_history_path =
-
-# Number of entries that will be kept in content history file.
-# game_history_size = 100
-
-# Sets the "system" directory.
-# Implementations can query for this directory to load BIOSes, system-specific configs, etc.
-# system_directory =
-
-# Sets start directory for menu content browser.
-rgui_browser_directory = "~/"
-
-# Content directory. Interacts with RETRO_ENVIRONMENT_GET_CONTENT_DIRECTORY.
-# Usually set by developers who bundle libretro/RetroArch apps to point to assets.
-# content_directory =
-
-# Assets directory. This location is queried by default when menu interfaces try to look for
-# loadable assets, etc.
-assets_directory = "/usr/share/libretro/assets"
-
-# Sets start directory for menu config browser.
-rgui_config_directory = "~/.config/retroarch/"
-
-# Show startup screen in menu.
-# Is automatically set to false when seen for the first time.
-# This is only updated in config if config_save_on_exit is set to true, however.
-# rgui_show_start_screen = true
-
-# Flushes config to disk on exit. Useful for menu as settings can be modified.
-# Overwrites the config. #include's and comments are not preserved.
-# config_save_on_exit = true
-
-# Load up a specific config file based on the core being used.
-# core_specific_config = false
-
-#### Video
-
-# Video driver to use. "gl", "xvideo", "sdl"
-# video_driver = "gl"
-
-# Which OpenGL context implementation to use.
-# Possible ones for desktop are: glx, x-egl, kms-egl, sdl-gl, wgl.
-# By default, tries to use first suitable driver.
-# video_gl_context =
-
-# Windowed x resolution scale and y resolution scale
-# (Real x res: base_size * xscale * aspect_ratio, real y res: base_size * yscale)
-# video_scale = 3.0
-
-# Fullscreen resolution. Resolution of 0 uses the resolution of the desktop.
-# video_fullscreen_x = 0
-# video_fullscreen_y = 0
-
-# Start in fullscreen. Can be changed at runtime.
-# video_fullscreen = false
-
-# If fullscreen, prefer using a windowed fullscreen mode.
-# video_windowed_fullscreen = true
-
-# Which monitor to prefer. 0 (default) means no particular monitor is preferred, 1 and up (1 being first monitor),
-# suggests RetroArch to use that particular monitor.
-# video_monitor_index = 0
-
-# Forcibly disable composition. Only works in Windows Vista/7 for now.
-# video_disable_composition = false
-
-# Video vsync.
-# video_vsync = true
-
-# Attempts to hard-synchronize CPU and GPU. Can reduce latency at cost of performance.
-# video_hard_sync = false
-
-# Sets how many frames CPU can run ahead of GPU when using video_hard_sync.
-# Maximum is 3.
-# video_hard_sync_frames = 0
-
-# Inserts a black frame inbetween frames.
-# Useful for 120 Hz monitors who want to play 60 Hz material with eliminated ghosting.
-# video_refresh_rate should still be configured as if it is a 60 Hz monitor (divide refresh rate by 2).
-# video_black_frame_insertion = false
-
-# Use threaded video driver. Using this might improve performance at possible cost of latency and more video stuttering.
-# video_threaded = false
-
-# Use a shared context for HW rendered libretro cores.
-# Avoids having to assume HW state changes inbetween frames.
-# video_shared_context = false
-
-# Smoothens picture with bilinear filtering. Should be disabled if using pixel shaders.
-# video_smooth = true
-
-# Forces rendering area to stay equal to content aspect ratio or as defined in video_aspect_ratio.
-# video_force_aspect = true
-
-# Only scales video in integer steps.
-# The base size depends on system-reported geometry and aspect ratio.
-# If video_force_aspect is not set, X/Y will be integer scaled independently.
-# video_scale_integer = false
-
-# A floating point value for video aspect ratio (width / height).
-# If this is not set, aspect ratio is assumed to be automatic.
-# Behavior then is defined by video_aspect_ratio_auto.
-# video_aspect_ratio =
-
-# If this is true and video_aspect_ratio is not set,
-# aspect ratio is decided by libretro implementation.
-# If this is false, 1:1 PAR will always be assumed if video_aspect_ratio is not set.
-# video_aspect_ratio_auto = false
-
-# Forces cropping of overscanned frames.
-# Exact behavior of this option is implementation specific.
-# video_crop_overscan = true 
-
-# Path to shader. Shader can be either Cg, CGP (Cg preset) or GLSL, GLSLP (GLSL preset)
-# video_shader = "/path/to/shader.{cg,cgp,glsl,glslp}"
-
-# Load video_shader on startup.
-# Other shaders can still be loaded later in runtime.
-# video_shader_enable = false
-
-# Defines a directory where shaders (Cg, CGP, GLSL) are kept for easy access.
-video_shader_dir = "/usr/share/libretro/shaders/"
-
-# CPU-based video filter. Path to a dynamic library.
-# video_filter =
-
-# Defines a directory where CPU-based video filters are kept.
-video_filter_dir = "/usr/lib/retroarch/filters/video/"
-
-# Path to a font used for rendering messages. This path must be defined to enable fonts.
-# Do note that the _full_ path of the font is necessary!
-# video_font_path = 
-
-# Size of the font rendered.
-# video_font_size = 32
-
-# Enable usage of OSD messages.
-# video_font_enable = true
-
-# Offset for where messages will be placed on screen. Values are in range 0.0 to 1.0 for both x and y values. 
-# [0.0, 0.0] maps to the lower left corner of the screen.
-# video_message_pos_x = 0.05
-# video_message_pos_y = 0.05
-
-# Color for message. The value is treated as a hexadecimal value.
-# It is a regular RGB hex number, i.e. red is "ff0000".
-# video_message_color = ffffff
-
-# Video refresh rate of your monitor.
-# Used to calculate a suitable audio input rate.
-# video_refresh_rate = 59.95
-
-# Allows libretro cores to set rotation modes.
-# Setting this to false will honor, but ignore this request.
-# This is useful for vertically oriented content where one manually rotates the monitor.
-# video_allow_rotate = true
-
-# Forces a certain rotation of the screen.
-# The rotation is added to rotations which the libretro core sets (see video_allow_rotate).
-# The angle is <value> * 90 degrees counter-clockwise.
-# video_rotation = 0
-
-#### Audio
-
-# Enable audio.
-# audio_enable = true
-
-# Audio output samplerate.
-# audio_out_rate = 48000
-
-# Audio resampler backend. Which audio resampler to use.
-# Default will use "sinc".
-# audio_resampler =
-
-# Audio driver backend. Depending on configuration possible candidates are: alsa, pulse, oss, jack, rsound, roar, openal, sdl, xaudio.
-# audio_driver =
-
-# Override the default audio device the audio_driver uses. This is driver dependant. E.g. ALSA wants a PCM device, OSS wants a path (e.g. /dev/dsp), Jack wants portnames (e.g. system:playback1,system:playback_2), and so on ...
-# audio_device =
-
-# Audio DSP plugin that processes audio before it's sent to the driver. Path to a dynamic library.
-# audio_dsp_plugin =
-
-# Directory where DSP plugins are kept.
-audio_filter_dir = "/usr/lib/retroarch/filters/audio/"
-
-# Will sync (block) on audio. Recommended.
-# audio_sync = true
-
-# Desired audio latency in milliseconds. Might not be honored if driver can't provide given latency.
-# audio_latency = 64
-
-# Enable audio rate control.
-# audio_rate_control = true
-
-# Controls audio rate control delta. Defines how much input rate can be adjusted dynamically.
-# Input rate = in_rate * (1.0 +/- audio_rate_control_delta)
-# audio_rate_control_delta = 0.005
-
-# Audio volume. Volume is expressed in dB.
-# 0 dB is normal volume. No gain will be applied.
-# Gain can be controlled in runtime with input_volume_up/input_volume_down.
-# audio_volume = 0.0
-
-#### Overlay
-
-# Defines a directory where overlays are kept for easy access.
-overlay_directory = "/usr/share/libretro/overlays/"
-
-# Path to input overlay
-# input_overlay =
-
-# Overlay opacity
-# input_overlay_opacity = 1.0
-
-# Overlay scale
-# input_overlay_scale = 1.0
-
-#### Input
-
-# Input driver. Depending on video driver, it might force a different input driver.
-# input_driver = sdl
-
-# Joypad driver. (Valid: linuxraw, sdl, dinput)
-# input_joypad_driver =
-
-# Keyboard layout for input driver if applicable (udev/evdev for now).
-# Syntax is either just layout (e.g. "no"), or a layout and variant separated with colon ("no:nodeadkeys").
-# input_keyboard_layout =
-
-# Defines axis threshold. Possible values are [0.0, 1.0]
-# input_axis_threshold = 0.5
-
-# Enable input auto-detection. Will attempt to autoconfigure
-# joypads, Plug-and-Play style.
-# input_autodetect_enable = true
-
-# Directory for joypad autoconfigs (PC).
-# If a joypad is plugged in, that joypad will be autoconfigured if a config file
-# corresponding to that joypad is present in joypad_autoconfig_dir.
-# Input binds which are made explicit (input_playerN_*_btn/axis) will take priority over autoconfigs.
-# Autoconfigs can be created with retroarch-joyconfig, manually, or with a frontend.
-# Requires input_autodetect_enable to be enabled.
-joypad_autoconfig_dir = "/usr/share/libretro/autoconfig/"
-
-# Sets which libretro device is used for a player.
-# Devices are indentified with a number.
-# This is normally saved by the menu.
-# Device IDs are found in libretro.h.
-# These settings are overridden by explicit command-line arguments which refer to input devices.
-# None: 0
-# Joypad (RetroPad): 1
-# Mouse: 2
-# Keyboard: 3
-# Generic Lightgun: 4
-# Joypad w/ Analog (RetroPad + Analog sticks): 5
-# Multitap (SNES specific): 257
-# Super Scope (SNES specific): 260
-# Justifier (SNES specific): 516
-# Justifiers (SNES specific): 772
-
-# input_libretro_device_p1 =
-# input_libretro_device_p2 =
-# input_libretro_device_p3 =
-# input_libretro_device_p4 =
-# input_libretro_device_p5 =
-# input_libretro_device_p6 =
-# input_libretro_device_p7 =
-# input_libretro_device_p8 =
-
-# Keyboard input. Will recognize letters ("a" to "z") and the following special keys (where "kp_"
-# is for keypad keys):
-#
-#   left, right, up, down, enter, kp_enter, tab, insert, del, end, home,
-#   rshift, shift, ctrl, alt, space, escape, add, subtract, kp_plus, kp_minus,
-#   f1, f2, f3, f4, f5, f6, f7, f8, f9, f10, f11, f12,
-#   num0, num1, num2, num3, num4, num5, num6, num7, num8, num9, pageup, pagedown,
-#   keypad0, keypad1, keypad2, keypad3, keypad4, keypad5, keypad6, keypad7, keypad8, keypad9,
-#   period, capslock, numlock, backspace, multiply, divide, print_screen, scroll_lock,
-#   tilde, backquote, pause, quote, comma, minus, slash, semicolon, equals, leftbracket,
-#   backslash, rightbracket, kp_period, kp_equals, rctrl, ralt
-#
-# Keyboard input, Joypad and Joyaxis will all obey the "nul" bind, which disables the bind completely, 
-# rather than relying on a default.
-# input_player1_a = x
-# input_player1_b = z
-# input_player1_y = a
-# input_player1_x = s
-# input_player1_start = enter
-# input_player1_select = rshift
-# input_player1_l = q
-# input_player1_r = w
-# input_player1_left = left
-# input_player1_right = right
-# input_player1_up = up
-# input_player1_down = down
-# input_player1_l2 =
-# input_player1_r2 =
-# input_player1_l3 =
-# input_player1_r3 =
-
-# Two analog sticks (DualShock-esque).
-# Bound as usual, however, if a real analog axis is bound,
-# it can be read as a true analog.
-# Positive X axis is right, Positive Y axis is down.
-# input_player1_l_x_plus =
-# input_player1_l_x_minus =
-# input_player1_l_y_plus =
-# input_player1_l_y_minus =
-# input_player1_r_x_plus =
-# input_player1_r_x_minus =
-# input_player1_r_y_plus =
-# input_player1_r_y_minus =
-
-# If desired, it is possible to override which joypads are being used for player 1 through 8.
-# First joypad available is 0.
-# input_player1_joypad_index = 0
-# input_player2_joypad_index = 1
-# input_player3_joypad_index = 2
-# input_player4_joypad_index = 3
-# input_player5_joypad_index = 4
-# input_player6_joypad_index = 5
-# input_player7_joypad_index = 6
-# input_player8_joypad_index = 7
-
-# Joypad buttons.
-# Figure these out by using RetroArch-Phoenix or retroarch-joyconfig.
-# You can use joypad hats with hnxx, where n is the hat, and xx is a string representing direction. 
-# E.g. "h0up"
-# input_player1_a_btn =
-# input_player1_b_btn =
-# input_player1_y_btn =
-# input_player1_x_btn =
-# input_player1_start_btn =
-# input_player1_select_btn =
-# input_player1_l_btn =
-# input_player1_r_btn =
-# input_player1_left_btn =
-# input_player1_right_btn =
-# input_player1_up_btn =
-# input_player1_down_btn =
-# input_player1_l2_btn =
-# input_player1_r2_btn =
-# input_player1_l3_btn =
-# input_player1_r3_btn =
-
-# Axis for RetroArch D-Pad. 
-# Needs to be either '+' or '-' in the first character signaling either positive or negative direction of the axis, then the axis number. 
-# Do note that every other input option has the corresponding _btn and _axis binds as well; they are omitted here for clarity.
-# input_player1_left_axis =
-# input_player1_right_axis =
-# input_player1_up_axis =
-# input_player1_down_axis =
-
-# Holding the turbo while pressing another button will let the button enter a turbo mode
-# where the button state is modulated with a periodic signal.
-# The modulation stops when the button itself (not turbo button) is released.
-# input_player1_turbo =
-
-# Describes the period and how long of that period a turbo-enabled button should behave.
-# Numbers are described in frames.
-# input_turbo_period = 6
-# input_turbo_duty_cycle = 3
-
-# This goes all the way to player 8 (*_player2_*, *_player3_*, etc), but omitted for clarity.
-# All input binds have corresponding binds for keyboard (none), joykeys (_btn) and joyaxes (_axis) as well.
-
-# Toggles fullscreen.
-# input_toggle_fullscreen = f
-
-# Saves state.
-# input_save_state = f2
-# Loads state.
-# input_load_state = f4
-
-# State slots. With slot set to 0, save state name is *.state (or whatever defined on commandline).
-# When slot is != 0, path will be $path%d, where %d is slot number.
-# input_state_slot_increase = f7
-# input_state_slot_decrease = f6
-
-# Toggles between fast-forwarding and normal speed.
-# input_toggle_fast_forward = space
-
-# Hold for fast-forward. Releasing button disables fast-forward.
-# input_hold_fast_forward = l
-
-# Key to exit RetroArch cleanly. 
-# Killing it in any hard way (SIGKILL, etc) will terminate RetroArch without saving RAM, etc.
-# On Unix-likes, SIGINT/SIGTERM allows a clean deinitialization.
-# input_exit_emulator = escape
-
-# Applies next and previous shader in directory.
-# input_shader_next = m
-# input_shader_prev = n
-
-# Hold button down to rewind. Rewinding must be enabled.
-# input_rewind = r
-
-# Toggle between recording and not.
-# input_movie_record_toggle = o
-
-# Toggle between paused and non-paused state
-# input_pause_toggle = p
-
-# Frame advance when content is paused
-# input_frame_advance = k
-
-# Reset the content.
-# input_reset = h
-
-# Cheats.
-# input_cheat_index_plus = y
-# input_cheat_index_minus = t
-# input_cheat_toggle = u
-
-# Mute/unmute audio
-# input_audio_mute = f9
-
-# Take screenshot
-# input_screenshot = f8
-
-# Netplay flip players.
-# input_netplay_flip_players = i
-
-# Hold for slowmotion.
-# input_slowmotion = e
-
-# Enable other hotkeys.
-# If this hotkey is bound to either keyboard, joybutton or joyaxis,
-# all other hotkeys will be disabled unless this hotkey is also held at the same time.
-# This is useful for RETRO_KEYBOARD centric implementations
-# which query a large area of the keyboard, where it is not desirable
-# that hotkeys get in the way.
-
-# Alternatively, all hotkeys for keyboard could be disabled by the user.
-# input_enable_hotkey_btn =
-
-# Increases audio volume.
-# input_volume_up = kp_plus
-# Decreases audio volume.
-# input_volume_down = kp_minus
-
-# Toggles to next overlay. Wraps around.
-# input_overlay_next =
-
-# Toggles eject for disks. Used for multiple-disk content.
-# input_disk_eject_toggle =
-
-# Cycles through disk images. Use after ejecting.
-# Complete by toggling eject again.
-# input_disk_next =
-
-# Toggles menu.
-# input_menu_toggle = f1
-
-# Toggles mouse grab. When mouse is grabbed, RetroArch hides the mouse,
-# and keeps the mouse pointer inside the window to allow relative mouse input
-# to work better.
-# input_grab_mouse_toggle = f11
-
-#### Menu
-
-# Menu driver to use. "rgui", "lakka", etc. 
-# menu_driver = "rgui"
-
-#### Camera
-
-# Override the default camera device the camera driver uses. This is driver dependant.
-# camera_device =
-
-# Override the default privacy permission for cores that want to access camera services. Is "false" by default.
-# camera_allow = false
-
-#### Location
-
-# Override the default privacy permission for cores that want to access location services. Is "false" by default.
-# location_allow = false
-
-#### Netplay
-
-# When being client over netplay, use keybinds for player 1.
-# netplay_client_swap_input = false
-
-# The username of the person running RetroArch. This will be used for playing online, for instance.
-# netplay_nickname = 
-
-# The amount of delay frames to use for netplay. Increasing this value will increase
-# performance, but introduce more latency.
-# netplay_delay_frames = 0
-
-# Netplay mode for the current user.
-# false is Server, true is Client.
-# netplay_mode = false
-
-# Enable or disable spectator mode for the player during netplay.
-# netplay_spectator_mode_enable = false
-
-# The IP Address of the host to connect to.
-# netplay_ip_address = 
-
-# The port of the host IP Address. Can be either a TCP or an UDP port.
-# netplay_ip_port = 55435
-
-#### Misc
-
-# Enable rewinding. This will take a performance hit when playing, so it is disabled by default.
-# rewind_enable = false
-
-# Rewinding buffer size in megabytes. Bigger rewinding buffer means you can rewind longer.
-# The buffer should be approx. 20MB per minute of buffer time.
-# rewind_buffer_size = 20
-
-# Rewind granularity. When rewinding defined number of frames, you can rewind several frames at a time, increasing the rewinding speed.
-# rewind_granularity = 1
-
-# Pause gameplay when window focus is lost.
-# pause_nonactive = true
-
-# Autosaves the non-volatile SRAM at a regular interval. This is disabled by default unless set otherwise.
-# The interval is measured in seconds. A value of 0 disables autosave.
-# autosave_interval =
-
-# Path to XML cheat database (as used by bSNES).
-# cheat_database_path =
-
-# Path to XML cheat config, a file which keeps track of which
-# cheat settings are used for individual games.
-# If the file does not exist, it will be created.
-# cheat_settings_path =
-
-# Directory to dump screenshots to.
-# screenshot_directory =
-
-# Records video after CPU video filter.
-# video_post_filter_record = false
-
-# Records output of GPU shaded material if available.
-# video_gpu_record = false
-
-# Screenshots output of GPU shaded material if available.
-# video_gpu_screenshot = true
-
-# Block SRAM from being overwritten when loading save states.
-# Might potentially lead to buggy games.
-# block_sram_overwrite = false
-
-# When saving a savestate, save state index is automatically increased before
-# it is saved.
-# Also, when loading content, the index will be set to the highest existing index.
-# There is no upper bound on the index.
-# savestate_auto_index = false
-
-# Slowmotion ratio. When slowmotion, content will slow down by factor.
-# slowmotion_ratio = 3.0
-
-# The maximum rate at which content will be run when using fast forward. (E.g. 5.0 for 60 fps content => 300 fps cap).
-# RetroArch will go to sleep to ensure that the maximum rate will not be exceeded.
-# Do not rely on this cap to be perfectly accurate.
-# A ratio of zero equals no FPS cap.
-# fastforward_ratio = 0.0
-
-# Enable stdin/network command interface.
-# network_cmd_enable = false
-# network_cmd_port = 55355
-# stdin_cmd_enable = false
-