# Jumpdrive The swiss army knife of Pine64 devices (currently only Pinetab and PinePhone) You can use this to flash a image **directly to eMMC**, troubleshooting a broken system, and a lot more. ### Table of Contents - [Installation](#installation) - [Building](#building) - [List of projects being used in Jumpdrive](#this-project-is-built-on) ### Installation Download the latest image for your device [here](https://github.com/dreemurrs-embedded/Jumpdrive/releases) Then use dd to flash the image to an SD card. Jumpdrive is pretty small, so there is no need for a large storage SD card. Insert the SD card to the device, then boot it up, you should get a nice splash screen and you should see a new storage device after you plug the device to USB. With the device plugged in, you can now flash a distro, or fix a unbootable installation. ### Building The dependencies are: - aarch64-linux-gnu- toolchain - u-boot tools - mtools - bison - flex - swig To install the dependencies on a Debian-based system: ```shell-session $ sudo apt-get install gcc-aarch64-linux-gnu u-boot-tools mtools bison flex swig ``` Download the projects to build: ```shell-session $ git submodule update --init --recursive ``` Build everything needed for the pinephone image: ```shell-session $ make -j8 pine64-pinephone.img.xz ``` Generate only the initramfs for the pinephone: ```shell-session $ make -j8 initramfs-pine64-pinephone.gz ``` Generate an image for every supported platform: ```shell-session $ make -j8 all ``` ### This project is built on: - [Busybox](https://busybox.net) - which is [GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html). - [postmarketOS](https://postmarketos.org) scripts - which is [GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html). - [Pine64's kernel fork](https://gitlab.com/pine64-org/linux) - which is [GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html). - [U-Boot](https://github.com/u-boot/u-boot) - which has [multiple licenses](https://github.com/u-boot/u-boot/tree/master/Licenses)